StarTech.com MR12GI-NETWORK-CARD Handleiding

StarTech.com Netwerkkaart/adapter MR12GI-NETWORK-CARD

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com MR12GI-NETWORK-CARD (2 pagina's) in de categorie Netwerkkaart/adapter. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support

Manual Revision: December 13, 2023

Product Diagram (MR12GI-NETWORK-CARD)

M.2 Network Card

CAT6 Cable Adapter

Port/LED/Connector Function

1M.2 Connector

• Insert the into a M.2 Network Card M.2 PCI Express

Slot Host Computer on the

• Supports or B Key M Key Slots

2Ethernet Port • Connect the CAT6 Cable Adapter

3LED Indicators

• Right LED Indicator Link Speed is

• Solid Green: 2.5 Gbps

• Solid Amber: 1 Gbps

• O: 100 or 10 Mbps

• Left LED Indicator Link Status is

• Solid Green: Active link

• Flashing Green: Activity

M.2 2.5GBase-T Ethernet Network Card - PCIe 2.0

4RJ45 Connector • Insert into the on the Ethernet Port M.2 Network

Card

5Bracket Mount

• Screw-in design for securing the CAT6 Cable Adapter

onto the or Full Prole Low Prole Bracket

(not pictured)

6Ethernet Port

• Connect a to the Network Cable CAT6 Cable

Adapter

• Supports 2.5 Gbps, 1 Gbps, 100 Mbps, and 10 Mbps

Package Contents

• M.2 Network Card x 1

• CAT6 Cable Adapter x 1

• Full Prole Bracket x 1

• Low Prole Bracket x 1

• Quick-Start Guide x 1

Requirements

For the latest requirements, please visit www.startech.com/MR12GI-NETWORK-CARD

• Host computer with an available B or M key M.2 PCI Express slot

• Phillips head screwdriver

Installation

Install the M.2 PCI Express Card

WARNING!

Static Electricity can severely damage Expansion Cards. Ensure that you are

adequately Grounded before you open your Host Computer Case or touch the

Expansion Card. You should wear an Anti-Static Strap or use an Anti-Static Mat

when installing any Host Computer component. If an Anti-Static Strap isn’t available,

discharge any built-up static electricity by touching a large Grounded Metal Surface

for several seconds. Only handle the Expansion Card by its edges and don’t touch the

gold connectors.

1. Turn o the and any that are connected to it Host Computer Peripheral Devices

(e.g. printers, external hard drives, etc.).

2. Unplug the from the .Power Cable Host Computer

3. Disconnect any that are connected to the .Peripheral Devices Host Computer

*Product may vary from image

4. Remove the from the . Consult the documentation that Cover Host Computer Case

came with the for details about doing this safely.Host Computer

5. Locate an open and remove the corresponding M.2 PCI Express Slot Slot Cover

Plate Host Computer Case from the back of the .

Note: Consult the documentation that came with the Host Computer for details about

doing this safely.

This card works in B Key or M Key M.2 PCI Express Slots.

6. Gently insert the into the open . Secure it M.2 PCI Express Card M.2 PCI Express Slot

using a and the included . Phillips Head Screwdriver Screw

7. Remove the (x 2) from the . Secure the to the Screws Bracket Mount Bracket Mount

Full Low Prole Bracket Phillips Head Screwdriver Screwsor using a and the (x 2).

8. Connect the into the on the CAT6 Cable Adapter Ethernet port

M.2 Network Card.

9. Fasten the or using a to the Full Low Prole Bracket Phillips Head Screwdriver

back of the .Host Computer Case

10. Return the onto the .Cover Host Computer Case

11. Reconnect the to the back of the .Power Cable Host Computer

12. Reconnect all of the disconnected in .Peripheral Devices Step 3

13. Turn on the and .Host Computer Peripheral Devices

14. Connect an to the on the .Ethernet Cable Ethernet Port CAT6 Cable Adapter

Download the Driver

1. Navigate to www.startech.com/PR12GI-NETWORK-CARD

2. Click the tab.Drivers & Downloads

3. Under , download the for Windows.Driver(s) Driver Package

Note: Windows usually saves the les to the Downloads folder associated with the

user account (e.g. C:\Users\useraccount\Downloads).

4. the zipped that was downloaded. Click . Right-click Driver Package Extract All

Follow the on-screen instructions to the les. Extract

Note: Ensure to make a note of the location where the drivers were extracted. That

location will be used in later steps.

5. Follow the instructions on the accompanying le for further Intel_Windows_DIG

Installation Instructions.

Verify the Driver Installation

Windows

1. Navigate to the .Device Manager

2. Under , right-click and click Network Adapters Intel Ethernet Controller I225-V

the option.Properties

3. Conrm that the is installed and working as expected.Driver

Linux

Note: Ensure kernel 5.8 or higher (LTS versions only) is being used. Execute the

following command from the terminal prompt to check the kernel version, uname -r.

1. Open a and type the command to Terminal Window sudo dmesg | grep Intel

check the Intel Driver Integration.

2. You should see the following response if the drivers are present, Intel(R) 2.5G

Ethernet Linux Driver.

Quick-Start Guide

À DÉPOSER

EN MAGASIN À DÉPOSER

EN DÉCHÈTERIE

Cet appareil,

ses accessoires

et piles

se recyclent

Regulatory Compliance

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

FCC - Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could

void the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Crescent

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Road

Brackmills,

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

Warranty Information

This product is backed by a two years warranty.

For further information on product warranty terms and conditions, please refer to .

www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or

agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots,

loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply,

the limitations or exclusions contained in this statement may not apply to you.

Product specificaties

Merk:	StarTech.com
Categorie:	Netwerkkaart/adapter
Model:	MR12GI-NETWORK-CARD
Kleur van het product:	Rood
Gewicht:	15 g
Breedte:	80 mm
Diepte:	22 mm
Hoogte:	15 mm
Gewicht verpakking:	170 g
Breedte verpakking:	142 mm
Diepte verpakking:	170 mm
Hoogte verpakking:	30 mm
LED-indicatoren:	Ja
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Snelstartgids:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Interface:	Ethernet
Duurzaamheidscertificaten:	Amerikaanse Federale wet inzake handelsovereenkomsten (TAA)
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000,2500 Mbit/s
Bekabelingstechnologie:	NBase-T
Netwerkstandaard:	IEEE 1588, IEEE 802.1Q, IEEE 802.1as, IEEE 802.1p, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3bz, IEEE 802.3i, IEEE 802.3u
Intern:	Ja
Naleving van duurzaamheid:	Ja
Ethernet interface type:	2.5 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet
Hostinterface:	M.2
Maximale overdrachtssnelheid van gegevens:	2500 Mbit/s
Montagebeugels meegeleverd:	Ja
Jumbo Frames ondersteuning:	Ja
Chipset:	Intel I225-V
Component voor:	Pc/server
(Buitenste) hoofdverpakking hoogte:	310 mm
(Buitenste) hoofdverpakking breedte:	500 mm
(Buitenste) hoofdverpakking lengte:	380 mm
Hoeveelheid per (buitenste) hoofdverpakking:	60 stuk(s)
Wake-on-LAN:	Ja
Jumbo frames:	9000
PCI versie:	2.0