StarTech.com HB30C3A1GEA Handleiding

StarTech.com Netwerkkaart/adapter HB30C3A1GEA

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com HB30C3A1GEA (2 pagina's) in de categorie Netwerkkaart/adapter. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: March 11, 2022 11:00 AM

Product Diagram (HB30C3A1GEA)

Port Function

1RJ45 Port

• Used to connect the to a .Hub Network Device

• Indicates that a network connection is Green:

established.

• Indicates network activity. Amber:

2USB-A Port (x3) • Used to connect (Mouse, Flash USB Devices

Drive, etc.) to the . Hub

3USB-C Connector • Used to connect the to a .Hub Host Computer

Requirements

For the latest requirements, please visit www.startech.com/HB30C3A1GEA

Package Contents

• USB-A Hub x 1

3-Port USB 3.0 Hub with Gigabit Ethernet | USB-C™ | White

Installation

Hardware Installation

1. Connect the integrated to a USB-C port on the USB Type-C Host Cable Host

Computer.

2. Connect each of your (x 3) to the on the .USB Devices USB-A Ports Hub

3. Connect a (sold separately) to the on the and to a CAT5e/6 Cable RJ45 Port Hub

Network Device.

Driver Installation

Installing the Drivers

Windows:

If the required driver does not automatically install after connecting the Network

Adapter to the host laptop, complete the driver installation manually:

1. Connect the to the (see Hardware Installation), Network Adapter Host Computer

the pop-up will appear.Found New Hardware

2. On the pop-up, click the button.Found New Hardware Cancel

3. Using a web browser, navigate to .

www.startech.com/HB30C3A1GEA

4. On the page, click the tab located in the middle of the screen.Product Support

5. In the section, click on the driver link that corresponds with Drivers and Downloads

the operating system running on the .Host Computer

6. Click to choose a location to download the .Zip le.Save As

7. Click to open the contents of the .Zip le.Open

8. Select the folder that corresponds to the operating system on the .Host Computer

9. Select the le from the list. Setup.exe

10. Right click the le and select from the pop-up Setup.exe Run as Administrator

menu.

11. Follow the on-screen prompts to complete the installation.

Note: you may need to restart the to complete the installation.Computer

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void

the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .

www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

Mesures de sécurité

• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.

安全対策

• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

Misure di sicurezza

• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

Säkerhetsåtgärder

• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com

Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com

Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills,

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp,

The Netherlands

macOS:

1. Connect the to the (see Hardware Installation), Network Adapter Host Computer

the pop-up will appear.Found New Hardware

2. On the pop-up, click the button.Found New Hardware Cancel

3. Using a web browser, navigate to .

www.startech.com/HB30C3A1GEA

4. On the page, click the tab located in the middle of the screen.Product Support

5. In the section, click on the driver link that corresponds with Drivers and Downloads

the operating system running on the .Host Computer

6. Click on the folder. Download

7. Select the folder.Realtek RTL8153 Mac Network Adapter

8. Click on the le.RTUNICO1.0.17.pkg

9. Follow the on-screen prompts to complete the installation.

Note: you may need to restart the to complete the installation.Computer

Product specificaties

Merk:	StarTech.com
Categorie:	Netwerkkaart/adapter
Model:	HB30C3A1GEA
Kleur van het product:	Wit
Gewicht:	36 g
Breedte:	41 mm
Diepte:	78 mm
Hoogte:	15 mm
Snoerlengte:	0.095 m
Gewicht verpakking:	102 g
Breedte verpakking:	142 mm
Diepte verpakking:	170 mm
Hoogte verpakking:	30 mm
Materiaal behuizing:	Kunststof
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Aantal USB-aansluitingen:	3
Certificering:	CE, FCC
USB-versie:	3.2 Gen 1 (3.1 Gen 1)
Interface:	Ethernet
Duurzaamheidscertificaten:	RoHS
Plug and play:	Ja
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Bekabelingstechnologie:	10/100/1000BaseT(X)
Netwerkstandaard:	IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Temperatuur bij opslag:	-10 - 70 °C
Intern:	Nee
Ondersteunt Mac-besturingssysteem:	Mac OS X 13.0 Ventura
Ethernet interface type:	Gigabit Ethernet
Stroomvoorziening via USB:	Ja
Hostinterface:	USB
Maximale overdrachtssnelheid van gegevens:	1000 Mbit/s
Datastroombeheer:	Ja
Jumbo Frames ondersteuning:	Ja
Full duplex:	Ja
Hot-plug ondersteuning:	Ja
Chipset:	VIA/VLI - VL812, Realtek - RTL8153
(Buitenste) hoofdverpakking hoogte:	310 mm
(Buitenste) hoofdverpakking breedte:	330 mm
(Buitenste) hoofdverpakking lengte:	530 mm
Hoeveelheid per (buitenste) hoofdverpakking:	60 stuk(s)
Auto MDIX IEEE:	Ja
Auto-negotiation:	Ja
Wake-on-LAN:	Ja
Bedrijfstemperatuur (T-T):	0 - 45 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 90 procent
Code geharmoniseerd systeem (HS):	85176990
Hot-swap:	Ja
Jumbo frames:	9000
Aantal USB 3.2-hubpoorten type A (3.1 Gen 1):	3
VLAN-tagging:	Ja
UASP-ondersteuning:	Ja