StarTech.com EOC1110K Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com EOC1110K (2 pagina's) in de categorie Wifi-repeater. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 07/26/2012
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
2 x Ethernet over Coax converter box
2 x Universal Power Adapter (NA/UK/EU)
Instruction Manual
System Requirements
10/100/1000Mbps compatible Ethernet network/equipment
Coaxial cabling (RG-59/6/7/11)
Available AC power outlet at converter box locations
EOC1110K
Gigabit Ethernet LAN Over Coaxial Extender Kit - 2.4km
*actual product may vary from photos
Installation
Hardware Installation
NOTE: Both of the converter boxes in the EOC1110K kit are identical,
so they can be installed at either end, in any order.
1. At one of the locations for the converter box, connect an RJ45
Ethernet cable from the existing Ethernet network or computer
network adapter to the “LAN” port on the converter box.
2. Connect the coax cable to the “Link” F-Connector on the converter.
OPTIONAL: If also transmitting analog cable TV signals over the
coax line, connect the CATV F-Connector to a TV or TV receiver.
Digital cable TV signals are not supported.
3. Connect the included power adapter. The power LED should
light up solid. The LAN Link/Act LED should light up solid when
successfully connected to an Ethernet device on the “LAN” port.
4. Setup the other converter boxes by following the same Steps 1~4
5. Once both units are setup, they should be able to automatically
locate one another over the coax cabling. The Coax Link and Sync
LEDs should stay solid once communication is established. The
Coax Link LED will ash during communication.
6. The devices plugged into the “LAN” ports should now be able to
communicate with one another freely.
Driver Installation
No driver or software installation is required for these converters on
any connected computer systems.
Cable Lengths
Maximum bandwidth (Mbps) based on coaxial cable type and length.
Distance RF
Bandwidth RG-59 RG-6 RG-7 RG-11
100m ~ 700m
< 30MHz
144 144 144 144
800m 128 144 144 144
900m 112 144 144 144
1000m 96 128 144 144
1100m 80 128 144 144
1200m 64 112 128 144
1300m 80 128 144
1400m 80 128 144
1500m 64 112 144
1600m 96 128
1700m 80 128
1800m 80 128
1900m 64 112
2000m 112
2100m 96
2200m 80
2300m 80
2400m 64
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow
the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Specications
Transmission Standards ITU G.9954, IEEE802.3, IEEE802.3u,
IEEE802.3x, IEEE802.3ab
Connectors (per unit)
2 x F-Connector female
1 x RJ45 female
1 x DC Power
LEDs (per unit)
1 x Power
1 x LAN Link/Activity
1 x Coax Link/Activity
1 x Coax Sync
Compatible Cabling RG-59, 6, 7, 11
Maximum Distance 2400m (RG-11)
Power Adapter 12VDC, 1000mA, center positive,
type M plug
Operating Temperature 0°C ~ 50°C (32°F ~ 122°F)
Storage Temperature -10°C ~ 70°C (14°F ~ 158°F)
Humidity 10% ~ 90% RH
Dimensions (per unit) 280.0mm x 138.0mm x 76.8mm
Weight (per unit) 320g


Product specificaties

Merk: StarTech.com
Categorie: Wifi-repeater
Model: EOC1110K
Kleur van het product: Zwart
Gewicht: 300 g
Breedte: 138 mm
Diepte: 94 mm
Hoogte: 28 mm
Gewicht verpakking: 1567 g
Breedte verpakking: 238 mm
Diepte verpakking: 195 mm
Hoogte verpakking: 164 mm
Soort: Netwerkontvanger
Aantal Ethernet LAN (RJ-45)-poorten: 2
Bekabelingstechnologie: 10/100/1000Base-T(X)
Netwerkstandaard: IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Temperatuur bij opslag: -10 - 70 °C
Externe adapter: Ja
Output current: 1 A
Spanning: 12 V
Mean time between failures (MTBF): 57000 uur
Maximaal bereik: 2400 m
Overdrachtssnelheid: 112 Mbit/s
AC-ingangsspanning: 110-240 V
Stroomverbruik (typisch): 4 W
Bedrijfstemperatuur (T-T): 0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V): 10 - 90 procent
Code geharmoniseerd systeem (HS): 85176990

Heb je hulp nodig?

Als je hulp nodig hebt met StarTech.com EOC1110K stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wifi-repeater StarTech.com

Handleiding Wifi-repeater

Nieuwste handleidingen voor Wifi-repeater