StarTech.com DVI92030202L Handleiding

StarTech.com Kabels voor pc's en randapparatuur DVI92030202L

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com DVI92030202L (2 pagina's) in de categorie Kabels voor pc's en randapparatuur. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Instruction Manual

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 07/06/2016

For the most up-to-date information, please visit: www.startech.com

USB2001EXT2/USB2002EXT2/USB2004EXT2

1/2/4 Port USB 2.0 Extender over Cat5 or Cat6 - Up to 330 ft (100m)

Packaging Contents

• 1 x USB extender Transmitter/Local unit

• 1 x USB extender Receiver/Remote unit

• 1 x Power Adapter

• 3 x Power Cord (NA/UK/EU)

• 1 x Mounting Kit

• 1 x USB cable

• 1 x Installation Guide

System Requirements

• USB enabled computer system with available USB port

• Available AC power outlet

• Solid core Category 5e unshielded twisted pair (UTP) or greater cabling.

Installation

1. Place the Local and Remote units at the desired locations and

connect together using RJ45 terminated Cat5 or Cat6 cabling.

a) If you are using surface cabling, ensure you have enough Cat5e

cabling to connect the Local Unit to the Remote Unit’s location,

and that each end is terminated with a RJ45 connector. The cabling

cannot go through any networking equipment (i.e. router, switch).

b) If you are using premise cabling, ensure that the Cat5e

cabling between the Local Unit to the Remote Unit has been

properly terminated in a wall outlet in each location and there is

a patch cable long enough to connect the Remote Unit to their

respective outlets. The cabling cannot go through any networking

equipment (i.e. router, switch).

2. Connect the included power adapter to the Local unit for the

USB2002EXT2. Connect the power adapter to the Remote unit for

the USB2004EXT2 or USB2001EXT2. The Power LED should light

up solid.

3. Connect the Local unit to the host computer system with a USB

cable. The computer can be either powered On or O. The operating

system should detect the extender and install it automatically.

4. USB devices can now be connected to the Remote unit.

USB2001EXT2 Front

USB Type A

Connector

USB Device

Status LED

Indicators Extender Status

LED Indicators

Remote Unit Local Unit

USB2004EXT2 Front

USB Type A

Connector

Remote Unit Local Unit

USB2002EXT2 Front

USB Type A

Connector Remote Unit Local Unit

LED Status Indicators

Extender Status

LED Indicators

Extender Status

LED Indicators

Extender Status

LED Indicators

Extender Status

LED Indicators

Extender Status

LED Indicators

USB Device

Status LED

Indicators

USB Device

Status LED

Indicators

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access

our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two year warranty.

In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned

for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow

the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

LED Description

Power Solid: Power is being supplied

Link Solid: Link established between Local and Remote units

Host Solid: Detected and installed by the host computer

Flashing: Local and Remote units are in suspend mode

Activity Flashing: Data transmission between Local and Remote units

O: Local and Remote units are in suspended mode

Device

Green: Device Enumerated

Orange: Overcurrent

O: No Device, or Not Enumerated

Specications

USB2001EXT2 USB2002EXT2 USB2004EXT2

Bus Interface USB 2.0

Number of Ports 1 2 4

Connectors

(Local unit)

1 x USB type B

female

1 x RJ45 Ethernet

female

1 x USB type B

female

1 x RJ45 Ethernet

female

1 x DC Power

1 x USB type B female

1 x RJ45 Ethernet

female

Connectors

(Remote unit)

1 x USB type A

female

1 x RJ45 Ethernet

Female

1 x DC Power

2 x USB type A

female

1 x RJ45 Ethernet

female

4 x USB type A

female

1 x RJ45 Ethernet

female

1 x DC Power

LEDs

(Local unit)

1 x Power

1 x Remote Link

1 x Host Link

1 x Activity

LEDs

(Remote unit)

1 x Power

1 x Remote Link

1 x Host Link

1 x Activity

1 x Device Status

1 x Power

1 x Remote Link

1 x Host Link

1 x Activity

2 x Device Status

1 x Power

1 x Remote Link

1 x Host Link

1 x Activity

4 x Device Status

Maximum Data

Transfer Rate USB 2.0: 480 Mbps

Maximum Cable

Distance 100 m / 330 ft

Compatible

Cabling Category 5e/6/6a

ESD Protection 8kV Contact, 16kV Air 4kV Contact, 8kV Air 8kV Contact, 16kV Air

Power Adapter 5VDC, 1000mA 24VDC, 1000mA 5VDC, 1000mA

Operating

Temperature 0°C ~ 50°C (32°F ~ 122°F)

Storage

Temperature -20°C ~ 70°C (-4°F ~ 158°F)

Operating

Humidity 20% ~ 80% RH

Dimensions 100.0mm x 76.0mm x 26.0mm (each)

Weight 600 g (each)

USB2001EXT2 Back

RJ45

connector

RJ45

connector

USB type B

Connector

(Host)

Power

Connector

Power

Connector

Ground

(Optional) Ground

(Optional)

LocalRemote

USB2002EXT2 Back

RJ45

connector

RJ45

connector

USB type B

Connector

(Host)

Power

Connector

Ground

(Optional)

Ground

(Optional)

LocalRemote

USB2004EXT2 Back

LocalRemote RJ45

connector

USB type B

Connector

(Host)

Power

Connector

Power

Connector

Ground

(Optional)

RJ45

connector

Ground

(Optional)

Product specificaties

Merk:	StarTech.com
Categorie:	Kabels voor pc's en randapparatuur
Model:	DVI92030202L
Kleur van het product:	Zwart
Gewicht:	107 g
Snoerlengte:	0.203 m
Gewicht verpakking:	114 g
Breedte verpakking:	145 mm
Diepte verpakking:	290 mm
Hoogte verpakking:	17 mm
Certificering:	CE, REACH
Duurzaamheidscertificaten:	RoHS
Plug and play:	Ja
Aantal per verpakking:	1 stuk(s)
Contact geleider materiaal:	Goud
Code geharmoniseerd systeem (HS):	84733080
AWG draad omvang:	28
Aansluiting 1:	DVI-I
Aansluiting 2:	DVI-D + VGA (D-Sub)
Connector 1 vormfactor:	Recht
Connector 2 vormfactor:	Recht
Aansluiting 1 type:	Mannelijk
Aansluiting 2 type:	Vrouwelijk
Materiaal buitenmantel:	Polyvinyl chloride (PVC)
Kabelafscherming:	Aluminium mylar foil