StarTech.com DKT31CHPDL Handleiding

StarTech.com Overige computer accessoire DKT31CHPDL

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com DKT31CHPDL (2 pagina's) in de categorie Overige computer accessoire. Deze handleiding was nuttig voor 57 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: October 7, 2020

Product Diagram (DKT31CHPDL)

Side View

Port Function

1RJ45 Port • Connect a Network Cable

2USB-C Port

• Connect a (e.g. ash drive), USB-C Storage Device

or USB-C Peripheral Device

• Connect the for Host Computer’s Power Adapter

Power Delivery Pass Through

3USB-A Ports • Connect a USB-A Peripheral Device

• Charge a USB-A Peripheral

4HDMI Output Port • Connect an HDMI Display Device

5USB-C Host Connector • Connect to a or Laptop Computer

Requirements

For the latest requirements and to view the full manual, please visit:

www.startech.com/DKT31CHPDL.

• Host Computer with USB-C Port

USB-C™ (10 Gbps) Multiport Adapter with HDMI, 85W Power Delivery Pass Through, GbE 2x USB-A & 1x USB-C

Installation

Powering the Multiport Adapter

USB Bus Power Mode (from Laptop):

The can be powered by the and Multiport Adapter Host Computer’s USB-C Port

does not require a separate power adapter for most device connections.

USB Power Delivery Pass Through Mode:

If you want to charge your through the , or need additional Laptop Multiport Adapter

power to support a requiring more power, follow these steps:USB Device

1. Connect the to a on the using the Multiport Adapter USB-C Port Host Computer

USB-C Host Connector.

2. Connect the from the to the USB-C Connector Host Computer’s Power Adapter

USB-C Port Multiport Adapteron the .

3. The will power the and pass Host Computer’s Power Adapter Multiport Adapter

power through to the .Host Computer

Windows 7 (and earlier) Driver Installation

1. If the dialog box appears on your screen, close the dialog Found New Hardware

box or click . Cancel

Note: Multiport Adapter Computer Once the is connected to the , if no existing

Drivers CD-ROM Deviceare found, it will load a that contains an executable le that

you can use to install the .Driver

2. After the nishes loading, run the .CD-ROM Device Installation File

3. Complete the on-screen instructions to nish the installation.

Note: You can also download the latest software from the StarTech.com website,

www.StarTech.com/DKT31CHPDL.

Connecting a Display

• Connect an to the on the HDMI M/M Cable HDMI Output Port Multiport Adapter

and to the on the .HDMI Input Port HDMI Display Device

Connect to a Network

• Connect a to the on the and to the Network Cable RJ45 Port Multiport Adapter

Network Device.

125

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void

the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

Warranty Information

This product is backed by a three-year warranty.

For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

Mesures de sécurité

• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.

安全対策

• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

Misure di sicurezza

• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

Säkerhetsåtgärder

• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

FR: fr.startech.com

DE: de.startech.com

ES: es.startech.com

NL: nl.startech.com

IT: it.startech.com

JP: jp.startech.com

StarTech.com Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

2500 Creekside

Parkwy

Lockbourne, Ohio

43137

U.S.A.

Connect USB Peripherals

• Connect a to the on the .USB-C Peripheral USB-C Port Multiport Adapter

- and/or -

• Connect to the on the .USB-A Peripherals USB-A Ports Multiport Adapter

Operation

RJ45 Port LED Indicators

LED Color Status Indication

Green Solid • Link speed is either 1000Mbps (1 GbE), 100Mbps, or

10Mbps

O • No connection established

Amber Flashing • Network trac detected

O • No link established

Product specificaties

Merk:	StarTech.com
Categorie:	Overige computer accessoire
Model:	DKT31CHPDL
Kleur van het product:	Black, Grey
Gewicht:	87 g
Breedte:	46 mm
Diepte:	117 mm
Hoogte:	16 mm
Snoerlengte:	0.25 m
Gewicht verpakking:	94.7 g
Breedte verpakking:	142 mm
Diepte verpakking:	170 mm
Hoogte verpakking:	30 mm
Materiaal behuizing:	Aluminium, Plastic
Ondersteunde mobiele besturingssystemen:	Android, iPadOS
LED-indicatoren:	Activity, Link
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Geïntegreerde geheugenkaartlezer:	Nee
Snelstartgids:	Ja
Aantal HDMI-poorten:	1
Microfoon, line-in ingang:	Nee
Aantal Ethernet LAN (RJ-45)-poorten:	1
Certificering:	CE, FCC
Resolutie (maximum digitaal):	3840 x 2160 Pixels
Duurzaamheidscertificaten:	CE, RoHS
Ethernet LAN, data-overdrachtsnelheden:	100,1000 Mbit/s
Temperatuur bij opslag:	-10 - 55 °C
Ondersteunt Mac-besturingssysteem:	Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion
Aantal poortenUSB 3.2 Gen 1 (3.1 Gen 1) Type C:	1
Naleving van duurzaamheid:	Ja
Hostinterface:	USB 3.2 Gen 2 (3.1 Gen 2) Type-C
Aantal poorten USB 3.2 Gen 2 (3.1 Gen 2) Type A:	2
Andere ondersteundende systemen:	ChromeOS
USB Power Delivery:	Ja
USB Power Delivery herziening:	3.0
USB Power Delivery tot max.:	100 W
Ondersteunde server operating systems:	Windows Server 2008 R2, Windows Server 2016
Chipset:	IT6563, RTS5423, RTL8153B
(Buitenste) hoofdverpakking hoogte:	440 mm
(Buitenste) hoofdverpakking breedte:	473 mm
(Buitenste) hoofdverpakking lengte:	331 mm
Hoeveelheid per (buitenste) hoofdverpakking:	70 stuk(s)
Overdrachtssnelheid:	10 Gbit/s
Bedrijfstemperatuur (T-T):	0 - 70 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 90 procent
Code geharmoniseerd systeem (HS):	84733020