StarTech.com DKT30CHVAUSP Handleiding

StarTech.com Overige computer accessoire DKT30CHVAUSP

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com DKT30CHVAUSP (2 pagina's) in de categorie Overige computer accessoire. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: December 2, 2019

Product Diagram (DKT30CHVAUSP)

Side View

Rear View

Port Function

1VGA Output Port • Connect a VGA Display Device

2RJ45 Port • Connect a Network Cable

3USB-C Port

• Connect a (e.g. ash drive), USB-C Storage Device

or USB-C Peripheral Device

• Connect the for Host Computer’s Power Adapter

Power Delivery passthrough

4SD Card Slot • Connect an SD Card

5USB-A Ports • Connect a USB-A Peripheral Device

• Charge a USB-A Peripheral

6HDMI Output Port • Connect an HDMI Display Device

7USB-C Host Connector • Connect to a or Laptop Computer

83.5 mm Audio Port • Connect an with a 4-position jack Audio Device

USB-C™ Multiport Adapter - 4K HDMI/VGA - SD™ - 2x USB-A/1x USB-C - 100W PD 3.0

Requirements

For the latest requirements and to view the full manual, please visit:

www.startech.com/DKT30CHVAUSP.

• Host Computer with USB-C Port

Installation

Powering the Multiport Adapter

USB Power Delivery 3.0 - Bus Power:

The is powered by the and does not Multiport Adapter Host Computer’s USB-C Port

require a separate power adapter. For power delivery passthrough follow these steps.

1. Connect the to a on the using the Multiport Adapter USB-C Port Host Computer

USB-C Host Connector.

2. Connect the from the to the USB-C Connector Host Computer’s Power Adapter

USB-C Port Multiport Adapteron the .

3. The will power the and pass Host Computer’s Power Adapter Multiport Adapter

power through to the .Host Computer

Windows 7 Driver Installation

1. Connect the to a on the using the Multiport Adapter USB-C Port Host Computer

USB-C Host Connector. The pop-up will appear.Found New Hardware

2. On the pop-up, click the button.Found New Hardware Cancel

3. Using a web browser, navigate to the StarTech.com website:

www.startech.com/DKT30CHVAUSP.

4. On the screen, click the tab.Product Support

5. In the section, click on the driver link that corresponds with Drivers and Downloads

the operating system running on the .Host Computer

6. Once the download is complete, extract the contents of the .Zip le.

7. Click the appropriate driver for the version of operating system that you are running

and follow the on-screen prompts to complete the installation.

234

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void

the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

Warranty Information

This product is backed by a three-year warranty.

For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

Mesures de sécurité

• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.

安全対策

• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

Misure di sicurezza

• Se il prodotto p2-ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

Säkerhetsåtgärder

• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

FR: fr.startech.com

DE: de.startech.com

ES: es.startech.com

NL: nl.startech.com

IT: it.startech.com

JP: jp.startech.com

StarTech.com Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

2500 Creekside

Parkwy

Lockbourne, Ohio

43137

U.S.A.

Connect an Audio Device

• Connect a to the on the and 3.5mm Cable 3.5 mm Audio Port Multiport Adapter

to an . Audio Device

Operation

RJ45 Port LED Indicators

LED Color Status Indication

Green Solid • Link speed is either 1000Mbps (1 GbE), 100Mbps, or

10Mbps

O • No connection established

Amber Flashing • Link established

O • No link established

Connecting a Display

• Connect an to the on the HDMI M/M Cable HDMI Output Port Multiport Adapter

and to the on the .HDMI Input Port HDMI Display Device

- or -

• Connect a to the on the and VGA M/M Cable VGA Output Port Multiport Adapter

to the on the .VGA Input Port VGA Display Device

Connect to a Network

• Connect a to the on the and to the Network Cable RJ45 Port Multiport Adapter

Network Device.

Connect USB Peripherals

• Connect a to the on the .USB-C Peripheral USB-C Port Multiport Adapter

- and/or -

• Connect to the on the .USB-A Peripherals USB-A Ports Multiport Adapter

Connect an SD Card

1. Insert an label side up into the on the .SD Card SD Card Slot Multiport Adapter

Note: The will automatically detect and Host Computer’s Operating System (OS)

install the required driver software.

2. Using the , navigate to the location (e.g. root Host Computer’s OS SD Card’s

directory).

3. Access the data on the inserted in step 1.SD Card

Product specificaties

Merk:	StarTech.com
Categorie:	Overige computer accessoire
Model:	DKT30CHVAUSP
Kleur van het product:	Black, Grey
Gewicht:	125 g
Breedte:	61 mm
Diepte:	460 mm
Hoogte:	15 mm
Snoerlengte:	0.3 m
Gewicht verpakking:	190 g
Breedte verpakking:	145 mm
Diepte verpakking:	117 mm
Hoogte verpakking:	30 mm
Materiaal behuizing:	Aluminium, Plastic
Ondersteunde mobiele besturingssystemen:	Android, iOS
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	SD, SDHC, SDXC
Snelstartgids:	Ja
VGA (D-Sub)poort(en):	1
Aantal HDMI-poorten:	1
Aantal Ethernet LAN (RJ-45)-poorten:	1
Hoofdtelefoonuitgangen:	1
Certificering:	CE, FCC, REACH
Resolutie (maximum analoog):	1920 x 1200 Pixels
Resolutie (maximum digitaal):	4096 x 2160 Pixels
Duurzaamheidscertificaten:	RoHS
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Temperatuur bij opslag:	-10 - 82 °C
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	2
Combo koptelefoon/microfoon port:	Ja
Ondersteunt Mac-besturingssysteem:	Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina, Mac OS X 11.0 Big Sur, Mac OS X 12.0 Monterey, Mac OS X 13.0 Ventura
Aantal poortenUSB 3.2 Gen 1 (3.1 Gen 1) Type C:	1
Hostinterface:	USB 3.2 Gen 1 (3.1 Gen 1) Type-C
Andere ondersteundende systemen:	ChromeOS
USB Power Delivery:	Ja
USB Power Delivery herziening:	3.0
USB Power Delivery tot max.:	100 W
Chipset:	VIA Labs - VL102, VIA Labs - VL161, VIA Labs - VL817, Genesys Logic - GL823K, ITE Tech - IT6564, Realtek - RTL8153B, Cmedia - HS100-B
(Buitenste) hoofdverpakking hoogte:	440 mm
(Buitenste) hoofdverpakking breedte:	335 mm
(Buitenste) hoofdverpakking lengte:	470 mm
Hoeveelheid per (buitenste) hoofdverpakking:	70 stuk(s)
Overdrachtssnelheid:	5 Gbit/s
Bedrijfstemperatuur (T-T):	0 - 45 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 90 procent
Code geharmoniseerd systeem (HS):	84733020