StarTech.com DK30C2HAGPD Handleiding

StarTech.com Overige computer accessoire DK30C2HAGPD

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com DK30C2HAGPD (2 pagina's) in de categorie Overige computer accessoire. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Quick-Start Guide

Manual Revision: 08/16/2018

Product Design

Actual product may vary from photos

Front View

1. HDMI Video 1 Port

2. HDMI Video 2 Port

3. Ethernet Port

4. USB 2.0 Port

5. USB-C Power Delivery Port (DC Power Input Only)

Rear View

1. USB 3.0 / 2.0 Selectable Port

2. USB-C Host Port

3. DP Alt Mode Switch

Package Contents

• Multiport Adapter x 1

• USB-C Cable x 1

• Quick-Start Guide x 1

Requirements

Operating System

• Windows® 10 (32/64 bit), 8.1 (32/64-bit), 7 (32/64-bit)

Host

• Host Laptop with an available USB-C port x 1

Note: For full functionality the Host USB-C Port must support

USB Power Delivery 3.0 and DP Alt Mode.

• USB-C Power Adapter x 1

• Wall Outlet x 1

Peripherals

• HDMI Enabled Display Device x 2

• HDMI Cable x 2

• Network Device x 1

• Ethernet Cable x 1

• (Optional) USB 2.0 Peripheral Device x 2

SKU #: DK30C2HAGPD

Dual Monitor USB-C™ Multiport Adapter - Dual HDMI - 2x USB-A - GbE - 100W PD

Installation

Connect the Host Computer

1. Connect the USB-C Cable to the USB-C Host Port on the Multiport

Adapter.

2. Connect the other end of the USB-C Cable to your Laptop.

Connect the Displays

1. Connect an HDMI Cable to the HDMI Video 1 Port on the

Multiport Adapter.

2. Connect the other end of the HDMI Cable to the HDMI port on

your HDMI Enabled Display Device.

3. Repeat steps 1-2 for the HDMI Video 2 Port.

Connect a Network Device

1. Connect an Ethernet Cable to the Ethernet Port on the Multiport

Adapter.

2. Connect the other end of the Ethernet Cable to your Network

Device (e.g. Router, Switch, Modem, etc.).

(Optional) Connect USB Peripherals

1. Connect a USB 3.0 or USB 2.0 Cable to the USB 3.0 / 2.0 Selectable

Port on the Multiport Adapter.

Connect a USB 2.0 Cable to the USB 2.0 Port.

2. Connect the other end of the USB Cable to your USB 3.0 or USB

2.0 Peripheral Device.

Operation

Charge Your Laptop

1. Connect a USB-C Power Adapter to the USB-C Power Delivery

Port on the Multiport Adapter.

2. Connect the other end of the USB-C Power Adapter to a Wall

Outlet.

DP Alt Mode Switch

Select the active based on your desired USB peripheral DP Alt Mode

performance and display resolution.

1. Disconnect the USB-C Host Port and USB-C Power Delivery Port

connections.

2. Toggle the DP Alt Mode Switch to the left for USB 3.0

performance (up to 5Gbps) and 2 x 1080p displays at 60Hz or 1 x

4K display at 30Hz.

Toggle the DP Alt Mode Switch to the right for USB 2.0

performance (up to 480Mbps) and 2 x 4K displays at 30Hz or 1 x

4K display at 60Hz.

3. Reconnect the USB-C Host Port and USB-C Power Delivery Port

connections.

For the latest information, specications, and support visit www.startech.com/DK30C2HAGPD.

• (Optional) USB 2.0 Cable x 2

• (Optional) USB 3.0 Peripheral Device x 1

• (Optional) USB 3.0 Cable x 1

1 2 3 4 5

2 3

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

• If Class 1 Laser Product; Laser radiation is present when the system is open.

• Wiring terminations should not be made with the product and/or electric lines under power.

• Product installation and/or mounting should be completed by a certied professional as per

the local safety and building code guidelines.

• Cables (including power and charging cables) should be placed and routed to avoid creating

electric, tripping or safety hazards.

Mesures de sécurité

• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous

tension.

• Si le produit est Laser de Classe 1, le rayonnement laser est présent lorsque le système est

ouvert.

• Les terminaisons de câblâge ne doivent pas être eectuées lorsque le produit et/ou les câbles

électriques sont sous tension.

• L’installation et/ou le montage du produit doit être réalisé par un professionnel certié et

dans le respect des normes locales et du code de construction local.

• Les câbles (y compris les câbles d’alimentation et de chargement) doivent être placés et

acheminés de façon à éviter tout risque électrique, de chute ou de sécurité

安全対策

• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

• クラス1レーザー製品では、システムが開放状態の場合、レーザー光が照射されています。

• 電源が入っている状態の製品または電線の終端処理を行わないでください。

• 製品の設置やマウントは、使用地域の安全ガイドラインおよび建築基準に従い、有資格の専門業者が行うようにしてください。

• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回しを行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよ

うにしてください。

Misure di sicurezza

• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

• Prodotto laser di Classe 1. Quando il sistema è aperto sono presenti radiazioni laser.

• I terminiali dei li elettrici non devono essere realizzate con il prodotto e/o le linee elettriche

sotto tensione.

• L’installazione e/o il montaggio dei prodotti devono essere eseguiti da un tecnico

professionale certicato che conosca le linee guida locali sulle norme edilizie e sulla sicurezza.

• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati e stesi in modo da

evitare pericoli di inciampo, rischi di scosse elettriche o pericoli per la sicurezza.

Säkerhetsåtgärder

• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

• Om laserproduktet är Klasse 1, laserstrålning avges när systemet är öppet.

• Montering av kabelavslutningar får inte göras när produkten och/eller elledningarna är

strömförda.

• Installation och/eller montering får endast göras av behöriga yrkespersoner och enligt

gällande lokala förordningar för säkerhet och byggnormer.

• Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så sätt att risk för

snubblingsolyckor och andra olyckor kan undvikas.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

o and

on, the user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or

modications not expressly approved by StarTech.com could void the user’s authority to operate

the equipment.

For the State of California

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to

the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference,

including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter

tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le

fonctionnement.

IC Radiation Exposure Statement

This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 0.5cm

between the radiator and your body.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected

names and/or symbols of third-party companies not related in any way to StarTech.com.

Where they occur these references are for illustrative purposes only and do not represent an

endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of their

respective holders.

Technical Support

StarTech.com lifetime technical support is an integral part of our commitment to provide industry-

leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads. For the latest

drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a three-year warranty. StarTech.com warrants its products against

defects in materials and workmanship for the periods noted, following the initial date of purchase.

During this period, the products may be returned for repair, or replacement with equivalent

products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not

warrant its products from defects or damages arising from misuse, abuse, alteration, or normal

wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers,

directors, employees or agents) for any damages (whether direct or indirect, special, punitive,

incidental, consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss,

arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If

such laws apply, the limitations or exclusions contained in this statement may not apply to you.

StarTech.com Ltd.

45 Artisans Cres.

London, Ontario

N5V 5E9

Canada

StarTech.com LLP

2500 Creekside Pkwy.

Lockbourne, Ohio

43137

U.S.A.

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd., Brackmills

Northampton

NN4 7BW

United Kingdom

FR: fr.startech.com

DE: de.startech.com

ES: es.startech.com

IT: it.startech.com

JP: jp.startech.com

NL: nl.startech.com

For manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Ethernet Port LED Indicators

USB Power Delivery 3.0

Note: Your Host Computer must support Power Delivery in order to

utilize Power Delivery passthrough.

Fast Role Swap

A Fast Role Swap function is available when using Power Delivery

3.0. This function prevents USB data disruption when switching

power sources (bus power to USB-C power adapter or USB-C

Power Adapter to bus power). For this function to work, the Host

Computer must also support Power Delivery 3.0.

If the Host Computer’s USB-C Port only supports USB Power

Delivery 2.0, it will still support Power Delivery passthrough, but it

will not support Fast Role Swap.

Warning for Host Devices Using Power Delivery 2.0: Before

disconnecting a USB-C Power Adapter from the Multiport Adapter,

ensure all data transfers are complete.

Connection Speed/

Type

Left Side LED

Indicator

Right Side LED

Indicator

1Gbps Blinking Amber Solid Green

100Mbps Blinking Amber Solid Amber

10Mbps Blinking Amber O

Ethernet Disabled O O

Cable Disconnected O O

Resolution Position

of DP Alt

Mode

Switch

Single

Extended

Display

Dual

Extended

Displays

Full HD (1920x1080,

1920x1200) @ 60Hz

Right or

Left

Yes Yes

2K (2560x1440,

2560x1600) @ 60Hz

Left Yes No

Right Yes Yes

UHD (3840x2160) @

30Hz

Left Yes No

Right Yes Yes

UHD (3840x2160) @

60Hz

Left No No

Right Yes No

4K (4096x2160) @ 24Hz Left Yes No

Right Yes Yes

4K (4096x2160) @ 60Hz Left No No

Right Yes No

Video Resolution Requirements

Product specificaties

Merk:	StarTech.com
Categorie:	Overige computer accessoire
Model:	DK30C2HAGPD
Kleur van het product:	Grijs
Gewicht:	281 g
Breedte:	60 mm
Diepte:	120 mm
Hoogte:	19 mm
Breedte verpakking:	145 mm
Diepte verpakking:	208 mm
Hoogte verpakking:	38 mm
Materiaal behuizing:	Kunststof
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Meegeleverde kabels:	USB Type-C
Geïntegreerde geheugenkaartlezer:	Nee
Snelstartgids:	Ja
Aantal USB 2.0-poorten:	1
Aantal HDMI-poorten:	2
Microfoon, line-in ingang:	Nee
Aantal Ethernet LAN (RJ-45)-poorten:	1
Certificering:	CE, FCC, REACH
Resolutie (maximum digitaal):	3840 x 2160 Pixels
Duurzaamheidscertificaten:	RoHS
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Netwerkstandaard:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Temperatuur bij opslag:	-20 - 70 °C
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	1
Ondersteunt Mac-besturingssysteem:	Mac OS X 13.0 Ventura
Aantal poortenUSB 3.2 Gen 1 (3.1 Gen 1) Type C:	2
Hostinterface:	USB 3.2 Gen 1 (3.1 Gen 1) Type-C
Auto MDI/MDI-X:	Ja
USB Power Delivery:	Ja
USB Power Delivery tot max.:	100 W
Full duplex:	Ja
Chipset:	VIA/VLI - VL102, VIA/VLI - VL170, VIA/VLI - VL817, MegaChips - STDP4320, MegaChips - MCDP2900, RealTek - RTL8153
(Buitenste) hoofdverpakking hoogte:	275 mm
(Buitenste) hoofdverpakking breedte:	305 mm
(Buitenste) hoofdverpakking lengte:	435 mm
Hoeveelheid per (buitenste) hoofdverpakking:	24 stuk(s)
Overdrachtssnelheid:	5 Gbit/s
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 95 procent
Code geharmoniseerd systeem (HS):	84733020
UASP-ondersteuning:	Ja