Stanley TLM50 Handleiding

Stanley Laserpointer TLM50

Lees hieronder de 📖 handleiding in het Nederlandse voor Stanley TLM50 (103 pagina's) in de categorie Laserpointer. Deze handleiding was nuttig voor 173 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/103

FIN

Please read these instructions before operating the product

www.StanleyTools.com

DOC100270398

STHT1-77409

User Manual

AAA

6.21ft

6.17ft

AAA

Figures

6.21ft

6.17ft

Contents

• User Safety

• Battery Safety

• Setup (Load Batteries)

• Operation

• Specications

• Warranty

• Error Codes

Retain all sections of this manual for future

reference.

User Safety

WARNING:

Carefully read the Safety Instructions and

Product Manual before using this product. The

person responsible for the instrument must

ensure that all users understand and adhere to

these instructions.

WARNING:

The following label information is placed on

your laser tool to inform you of the laser class

for your convenience and safety.

The STHT1-77409 tool emit a visible laser beam, as

shown in Figure A. The laser beam emitted is Laser

Class 2 per IEC 60825-1 and complies with 21 CFR

1040.10 and 1040.11 except for deviations pursuant to

Laser Notice No. 50, dated June 24, 2007.

WARNING:

While the laser tool is in operation, be careful

not to expose your eyes to the emitting laser

beam (red light source). Exposure to a laser

beam for an extended time period may be

hazardous to your eyes. Do not look into the

beam with optical aids.

WARNING:

To reduce the risk of injury, user

must read the Product User manual, Laser

Safety, and Battery Safety manuals.

FCC Compliance

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

Stanley Black & Decker, Slough, Bershire SL1 3YD, UK

herewith declares that the product STHT1-77409 is in

compliance with the essential requirements and all

other provisions of Directive 1999/5/EC. Please contact

Stanley Black & Decker for DoC.

Battery Safety

WARNING: Batteries. can explode or leak and

can cause injury or re. To reduce the risk:

ALWAYS follow all instructions and warnings

on the battery label and package.

DO NOT short any battery terminals.

DO NOT charge alkaline batteries.

DO NOT mix old and new batteries. Replace

all of them at the same time with new

batteries of the same brand and type.

DO NOT mix battery chemistries.

DO NOT dispose of batteries in re.

ALWAYS keep batteries out of reach of

children.

ALWAYS remove batteries if the device will

not be used for several months.

NOTE: Ensure that the recommended

batteries are used.

NOTE: Ensure the batteries are inserted in the

correct manner, with the correct polarity.

Setup (Load Batteries)

1. Locate the battery compartment latch on the back

of the tool (Figure B #2).

Contents

• User Safety

• Battery Safety

• Setup (Load Batteries)

• Operation

• Specications

• Warranty

• Error Codes

Retain all sections of this manual for future

reference.

User Safety

WARNING:

Carefully read the Safety Instructions and

Product Manual before using this product. The

person responsible for the instrument must

ensure that all users understand and adhere to

these instructions.

WARNING:

The following label information is placed on

your laser tool to inform you of the laser class

for your convenience and safety.

The STHT1-77409 tool emit a visible laser beam, as

shown in Figure A. The laser beam emitted is Laser

Class 2 per IEC 60825-1 and complies with 21 CFR

1040.10 and 1040.11 except for deviations pursuant to

Laser Notice No. 50, dated June 24, 2007.

WARNING:

While the laser tool is in operation, be careful

not to expose your eyes to the emitting laser

beam (red light source). Exposure to a laser

beam for an extended time period may be

hazardous to your eyes. Do not look into the

beam with optical aids.

WARNING:

To reduce the risk of injury, user

must read the Product User manual, Laser

Safety, and Battery Safety manuals.

FCC Compliance

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

Stanley Black & Decker, Slough, Bershire SL1 3YD, UK

herewith declares that the product STHT1-77409 is in

compliance with the essential requirements and all

other provisions of Directive 1999/5/EC. Please contact

Stanley Black & Decker for DoC.

Battery Safety

WARNING: Batteries. can explode or leak and

can cause injury or re. To reduce the risk:

ALWAYS follow all instructions and warnings

on the battery label and package.

DO NOT short any battery terminals.

DO NOT charge alkaline batteries.

DO NOT mix old and new batteries. Replace

all of them at the same time with new

batteries of the same brand and type.

DO NOT mix battery chemistries.

DO NOT dispose of batteries in re.

ALWAYS keep batteries out of reach of

children.

ALWAYS remove batteries if the device will

not be used for several months.

NOTE: Ensure that the recommended

batteries are used.

NOTE: Ensure the batteries are inserted in the

correct manner, with the correct polarity.

Setup (Load Batteries)

1. Locate the battery compartment latch on the back

of the tool (Figure B #2).

Product specificaties

Merk:	Stanley
Categorie:	Laserpointer
Model:	TLM50
Kleur van het product:	Black,Red,Yellow
Soort:	Laserafstandsmeter
Materiaal behuizing:	Rubber
Automatisch uitschakelen:	Ja
Nauwkeurigheid:	6 mm
Ondersteund aantal accu's/batterijen:	2
Inclusief batterij:	Ja
Afstandmeeteenheden:	m
Maximale meetafstand:	15 m
Minimale meetafstand:	0.15 m
Type beeldscherm:	Digitaal
Type batterij:	AAA
Display met achtergrondverlichting:	Ja