Stadler Form Anna BIG Handleiding

Stadler Form Heater Anna BIG

Lees hieronder de 📖 handleiding in het Nederlandse voor Stadler Form Anna BIG (76 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/76
Anna
Operating instructions
Gebrauchsanweisung
Mode d‘emploi
Istruzioni per luso
Manual de instrucciones
Gebruiksaanwijzing
Brugsanvisning
Käytohje
Bruksanvisning
Bruksanvisning
Инструкция по эксплуатации
big
Anna
1
2
3
13
11
14
4
7
12
big
610
5
9 8
2
J
A
H
R
E
G
A
R
A
N
T
I
E
2
Y
E
A
R
S
W
A
R
R
A
N
T
Y
2
A
N
N
É
E
S
D
E
G
A
R
A
N
T
I
E
2
TIME
TR FAN HEAADITIONAL TERS:
TY C D / WARM / PI AL «COL COLD» EFFE T (QC UIET / LOUD / QU )IET
TEMPERAT EUR
22°
2
18°
16°
HE AT ON
ON
OFF
0 15 30 45 60 75 90 MIN.
TIME
WITH ADAP EAT TIVE H (V Q )ERY UIET
TEMPERATURE
22°
2
18°
16°
0 15 30 45 60 75 90 MIN.
A
D
A
P
T
I
V
E
A
N
D
C
O
N
T
INU OU S HE AT IN G
E ADAPTIVE HEAT™ technology automatically adapts
heat output in auto mode to reach and keep the desired
temperature in an efficient way
D Heizleistung wird im Auto Modus dank ADAPTIVE
HEAT Technologie automatisch adaptiert, um die
Ziel-Temperatur effizient zu erreichen und beizubehalten
F En mode auto, la technologie ADAPTIVE HEAT™ ajuste
automatiquement le niveau de sortie de la chaleur pour
atteindre et maintenir la température désirée de manière
efficace
Stadler Form Aktiengesellschaft, Chamerstrasse 174, 6300 Zug, Switzerland
Phone +41 41 720 48 48, Fax +41 41 720 48 44, www.stadlerform.com/contact
Share your feedback about Anna big on:
Teilen Sie Ihr Feedback von Anna big auf:
Partagez votre commentaire sur Anna big :
www.stadlerform.com/Anna-big
Download instruction manual:
Bedienungsanleitung hier herunterladen:
Téléchargez le mode d’emploi :
www.stadlerform.com/Anna-big/manual
For frequently asked questions go to:
Für häufig gestellte Fragen besuchen Sie:
Trouvez la foire aux questions sur :
www.stadlerform.com/Anna-big/support
Watch the video of Anna big:
Schauen Sie sich das Video zu Anna big an:
Regardez la vidéo du Anna big :
www.stadlerform.com/Anna-big/video
Congratulations! You have just purchased the exceptional ANNA big fan
heater. It will bring you great pleasure and improve the ambient air for you.
As with all domestic electrical appliances, particular care is needed with
this model also, in order to avoid injury, fire damage or damage to the
appliance. Please study these operating instructions carefully before us-
ing the appliance for the first time and follow the safety advice on the
appliance itself.
Description of the appliance
The appliance consists of the following main components:
1. Mains cable for power supply
2. Zinc base
3. Housing
4. Main switch for power supply
5. Touch Panel (touch-sensitive control element)
6. On/Off button
7. LED light (red=heating, blue=cooling)
8. Control panel for selection of temperature: 0° – 35 °C or maximum «Hi»
9. Control panel for selection of heat output level: low to high (8 levels)
10. Button for Auto Mode, symbol «Auto Mode»
11. Flap with washable air filter
12. Carrying handle
13. Back cover
14. Front cover
Important safety instructions
Please read through the operating instructions carefully before you use
the appliance for the first time and keep them safely for later reference; if
necessary pass them on to the next owner.
English
This product is only suitable for well insulated spaces or occasional use.
CAUTION Some parts of this product can become very hot and
cause burns. Particular attention has to be given where children and
vulnerable people are present.
This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without supervision.
Children of less than 3 years should be kept away unless continuously
supervised.
Children aged from 3 years and less than 8 years shall only switch on/off
the appliance provided that it has been placed or installed in its intended
normal operating position and they have been given super-vision or in-
struction concerning use of the appliance in a safe way and understand
the hazards involved.
Stadler Form refuses all liability for loss or damage which arises as a result
of failure to follow these operating instructions.
The appliance is only to be used in the home for the purposes described
in these instructions. Unauthorised use and technical modifications to the
appliance can lead to danger to life and health.
Never submerge the unit in water (danger of short circuiting).
Never run a defective unit (e.g. supply cord).
Never touch energized parts.
Only connect the cable to alternating current. Observe the voltage infor-
mation given on the appliance. Do not use extension cords.
The heater must not be located directly below a socket-outlet.
Do not open the appliance (repairs only by service agents).
Do not run the power cord over sharp edges and make sure that it does
not get trapped. Do not pull the plug from the socket with wet hands or by
holding on to the power cord.
Do not place the appliance near a heat source. Do not subject the power
cord to direct heat (such as a heated hotplate, open flames, hot iron sole
plates or heaters for example). Protect power cords from oil.
Please make sure that the used socket remains accessible.
Do not run the heater on an uneven or soft surface.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the
thermal cut-out, this appliance must not be supplied through an external
switching device, such as a timer.
WARNING: In order to avoid overheating, do not cover the air inlet or air
outlet – fire hazard!
Do not use the heater in small rooms (below 4 m
2 in size), in explosive envi-
ronment, or for drying laundry.
-Do not touch the front part of the appliance, it might reach hot tempera
ture.
Use the heater only under supervision.
Do not insert any object and/or finger into the openings of the heater.
To extinguish burning appliances only use fire blankets.
Setting up / operation
Note: Make sure that there is always sufficient space between the appli-
ance and the wall or other large objects (> 50 cm). The air flow must not
be blocked by objects of any kind. If Anna big is set up in a bathroom, keep
a safety distance of at least 100 cm to showers, bathtubs, water faucets,
washbasins, etc.
1. Having set up Anna big in the desired position connect the cable (1) to the
household supply socket.
2. First, push the main switch for power supply (4) on the back of the ap-
pliance.
3. Switch on the appliance by pressing the On/Off button (6). The target
temperature appears on the display.
4. The target temperature can be changed from 0 °C (cooling mode) to
35 °C or maximum «Hi» over the right control panel (8) «Temperature».
The heating mode is active from 1 ° 35 °C & «Hi». The digit flashes in
configuration mode. Pushing the «+» button increases the target tem-
If the supply cord is damaged, it must be replaced by the manufacturer,
or its service agent, or a qualified person in order to avoid a hazard.
perature. Pushing the «» button reduces the target temperature. The
setting is saved if no change occurs on the control panel for selection of
temperature for three seconds. The current room temperature is subse-
quently shown on the display.
Info: The appliance switches off the heating element when the target
temperature is reached and the temperature indicator flashes on the
display. The ventilator remains switched on for 30 seconds at the low-
est level to cool down the heating element. The current temperature is
then measured approx. every 30 minutes (the fan runs for 1 minute at the
lowest level). The appliance switches on again if the room temperature
recorded drops below the set target temperature.
5. Cooling mode: the heating element switches off if the temperature is set
to 0 °C and the ventilator blows cool air out of the appliance. The LED
light (7) changes from red to blue. There is no temperature shown on the
display in cooling mode.
6. The heat output level can be changed over the left control panel (9)
«Power Level». The display flashes during the input process. Typing «+»
increases the output level. Typing «–» reduces the output level. The set-
ting is saved if no change occurs on the control panel for selection of heat
output level for three seconds. The current room temperature is subse-
quently shown on the display.
7. Auto mode is activated by pressing the «Auto Mode» button (10). «Auto
Mode» is shown in the display. The preset target temperature of 22 °C
can be changed using the right-hand control panel for selection of tem-
perature (8). The heat output level is selected automatically in auto mode
- depending on the room temperature. The smaller the difference be-
tween the room temperature and the target temperature, the smaller the
heat output level selected. We refer to this as «Adaptive Heat
TM» technol-
ogy and we have filed for an international patent. This allows Anna big to
make sure that the target temperature is reached, quickly and efficiently,
and maintained. Anna big thus prevents a sharp temperature drop and
prevents the appliance from being constantly switched on and off. Auto
mode is deactivated if the heat output level is changed manually (9).
Info: The appliance switches off the heating element when the target
temperature is reached and the temperature indicator flashes on the
display.
8. Switch off the appliance by pressing the On/Off button (6). The ventilator
remains switched on for 30 seconds at the lowest level to cool down the
heating element. The appliance saves the temperature input and the heat
output level even if the appliance is switched off.
9. Protection against overheating: the appliance is equipped with overheat-
ing protection which switches off the appliance in the event of a techni-
cal fault or improper use (the ventilator continues to run for some time at
the lowest level to cool down the appliance). Should this occur, rectify the
fault or cease the improper use (e.g. 50 cm space around the appliance, do
not cover the appliance, set the appliance up in an upright position). Once
the appliance has cooled down it can be put back into service.
10. The temperature indicator can be changed from Celsius to Fahrenheit and
vice versa by pressing the «Auto Mode» button (10) for five seconds.
11. In the first few hours after putting Anna big into operation there might be an
unpleasant smell. This smell will dissipate and it is nothing to worry about.
Tip: At the back of Anna big you can find the air inlet. The air inlet is
covered with an air filter and a grid. The grid is detachable. Please take
off the grid and remove the air filter. You may wash out the air filter with
a little bit of soap and warm water. Rinse it well and let it dry completely
before you put it back on the air inlet and reattach the grid.
Cleaning
Prior to any maintenance, cleaning and after each use, switch off the appli-
ance and unplug the mains cable (1) from the socket.
Attention: Never immerse the device in water (danger of short circuit).
For external cleaning, rub with a damp cloth and then dry thoroughly.
If the filter (11) behind the back cover (13) is full of dust, please remove the
filter, wash it or clean it with the vacuum cleaner.
Repairs
Repairs to electrical appliances must only be carried out by a qualified
electrical technician. If improper repairs are carried out, the warranty
lapses and all liability is refused.
Never operate the appliance if the adaptor or plug is damaged, after it has
malfunctioned, if it has been dropped or has been damaged in any other
way (cracks/breaks in the casing).
Do not push any object into the appliance.
If the appliance is beyond repair, make it unusable immediately by cutting
through the cable and hand it in at the collection point provided for the
purpose.
Disposal
The European directive 2012 / 19 / CE on Waste Electrical and Electronic
Equipment (WEEE), requires that old household electrical appliances must
not be disposed in the normal unsorted municipal waste stream. Old appli-
ances must be collected separately in order to optimize the recovery and re-
cycling of the materials they contain and reduce the impact on human health
and the environment. The crossed out “wheeled bin” symbol on the product
reminds you of your obligation, that when you dispose of the appli-
ance it must be separately collected. Consumers should contact
their local authority or retailer for information concerning the cor-
rect disposal of their old appliance.
Specifications
Rated voltage 220 – 240 V / 50 Hz
Temperature range 0 ° – 35 °C / > 35 °C = Hi
Power consumption 300 W (min.)
Rated power 2‘000 W (max.)
Dimensions 183 x 420 x 183 mm
(width x height x depth)
Weight 3.2 kg
Sound level 28 50 dB(A)
Complies with EU
Regulations CE / WEEE / RoHS / EAC
All rights for any technical modifications are reserved
Name Manufacturer /
Trade Mark
Type /
Model Technical Data
heater
element
Foshan Shunde Esite
Electrical Appliances Co. Ltd 2000 W
AC 220 - 240 V
50 Hz
650Wx3
fan motor Foshan Shunde Esite
Electrical Appliances Co. Ltd EST1225S
DC 12 V
2500 rpm
8.4 W Class A
Item Symbol Value Unit
Heat output
Nominal heat output Pnom 1.41 kW
Minimum heat ouput (indicative) Pmin 0.4 kW
Maximum continous heat output Pmax,c 2.0 kW
Auxillary electricity consumption
at nominal heat output elmax 0.0064 kW
at minimum heat output elmin 0.0044 kW
in standby mode elSB 0 kW
Item Unit
Type of heat input, for electric storage local spater heaters only
(select one)
manual heat charge control,with integrated thermostat [no]
manual heat charge control with room and / or
outdoor temperature feedback [no]
electronics heat charge control with room and / or
outdoor temperature feedback [no]
fan assisted heat output [no]
Type of heat output / room temperature control (select one)
single stage heat output and no room temperature control [no]
Two or more manual stages, no room temperature control [no]
with mechanic thermostat room tenperature control [no]
with electronic room temperature control [yes]
electronic room temperature control plus day timer [no]
electronic room temperature control plus week timer [no]
Other control options (multiple selections possible)
room temperature control, with presence detection [no]
room temperature control, with open window detection [no]
with distance control option [no]
with adaptive start control [no]
with working time limitation [no]
with black bulb sensor [no]
Contact details Stadler Form Aktiengesellschaft
Chamerstrasse 174, 6300 Zug, Switzerland
Gratulation! Sie haben soeben den aussergehnlichen Heizfter ANNA
big erworben. Sie wird Ihnen viel Freude machen und die Raumluft r Sie
verbessern.
Wie bei allen elektrischen Haushaltsgeräten wird auch bei diesem Gerät zur
Vermeidung von Verletzungen, Brand- oder Geräteschäden besondere Sorg-
falt verlangt. Bitte studieren Sie die vorliegende Betriebsanleitung vor der
Inbetriebnahme und beachten Sie die Sicherheitshinweise auf dem Gerät.
Getebeschreibung
Das Gerät besteht aus den folgenden Komponenten:
1. Netzkabel für die Stromversorgung
2. Fuss aus Zink
3. Gehäuse
4. Hauptschalter für Stromversorgung
5. Touch Panel (behrungsempfindliches Bedienelement)
6. Ein/Aus-Taste
7. LED Statuslicht (rot=Heizung, blau=hlung)
8. Bedienfeld für die Wahl der Temperatur: 0 ° – 35 ° C oder maximal «Hi»
9. Bedienfeld für die Wahl der Heizleistungsstufe: niedrig bis hoch (8 Stufen)
10. Taster Auto Modus, Anzeige «Auto Mode»
11. Klappe mit abwaschbarem Luftfilter
12. Tragegriff
13. Lufteinlassgitter
14. Frontauslassgitter
Wichtige Sicherheitshinweise
Bitte lesen Sie die Gebrauchsanleitung genau durch, bevor Sie das Gerät das
erste Mal in Betrieb nehmen und bewahren Sie sie zum späteren Nachschla-
gen gut auf, geben Sie sie ggf. an den Nachbesitzer weiter.
Deutsch
Dieses Produkt ist nur für gut isolierte Räume oder gelegentlichen Ge-
brauch geeignet.
VORSICHT Einige Teile des Produktes können sehr heiss werden und Ver-
brennungen verursachen. Besondere Vorsicht ist geboten, wenn Kinder
und schutzbedürftige Personen anwesend sind.
Dieses Gerät kann von Kindern ab 8 Jahren und Personen mit einge-
schränkten körperlichen, sensorischen oder geistigen Fähigkeiten, aber
auch von unerfahrenen und unwissenden Personen verwendet werden,
sofern diese das Gerät unter Aufsicht verwenden oder von einer anderen
Person über die sichere Verwendung des Gerätes unterwiesen wurden
und sich der damit verbundenen Gefahren bewusst sind. Kinder dürfen
nicht mit dem Gerät spielen. Kinder dürfen das Gerät nur unter Aufsicht
reinigen und warten.
Kinder unter 3 Jahren sind vom Gerät fernzuhalten; es sei denn sie wer-
den ständig überwacht.
Kinder ab 3 Jahren und jünger als 8 Jahre dürfen das Gerät nur ein- und
ausschalten, wenn sie beaufsichtigt werden oder bezüglich des sicheren
Gebrauchs des Gerätes unterwiesen wurden und die daraus resultieren-
Für Schäden, die durch Nichtbeachten dieser Gebrauchsanleitung ent-
stehen, lehnt Stadler Form jegliche Haftung ab.
-Das Gerät ist nur im Haushalt für die in dieser Gebrauchsanweisung be
schriebenen Zwecke zu benutzen. Ein nicht bestimmungsgemässer Ge-
brauch sowie technische Veränderungen am Get können zu Gefahren
r Gesundheit und Leben führen.
Gerät nie in Wasser / andere Flüssigkeiten tauchen. Kurzschlussgefahr!
Beschädigte Gete (inkl. Netzkabel) nie in Betrieb nehmen.
Nie unter Spannung stehende Teile berühren.
-Schliessen Sie das Kabel nur an Wechselstrom an. Gerät nur an fach
gerecht installierter Steckdose mit korrekter Spannung betreiben. Keine
Verlängerungskabel verwenden.
Der Heizer darf nicht unmittelbar unter einer Steckdose platziert werden.
Das Gerät nie selber öffnen (Reparaturen nur durch Fachleute).
Das Netzkabel nicht über scharfe Kanten ziehen oder einklemmen. Den
Stecker nie am Netzkabel oder mit nassen Händen aus der Steckdose
ziehen.
Gerät nicht in der Nähe einer Wärmequelle aufstellen. Das Netzkabel
keiner direkten Hitzeeinwirkung (wie z.B. heisse Herdplatten, offene
Flammen, heisse geleisen oder Heizöfen) aussetzen. Netzkabel vor Öl
schützen.
Die benutzte Steckdose muss jederzeit zugänglich bleiben.
Get nie auf unebenen Flächen oder weichen Unterlagen betreiben.
VORSICHT: Um eine Gefährdung durch ein unbeabsichtigtes Rücksetzen
des Schutztemperaturbegrenzers zu vermeiden, darf das Get nicht
über ein externe Schaltvorrichtung wie beispielsweise eine Zeitschaltuhr
versorgt werden.
WARNUNG: Während des Betriebs den Lufteinlass und Luftauslass nicht
abdecken – Brandgefahr!
Gerät nicht in kleinen Räumen (unter 4 m2 Fläche), nicht in explosiver Um-
gebung, nicht zum Wäsche trocknen einsetzen.
Der Bereich des Luftauslasses nicht berühren, da er hohe Temperatur er-
reichen kann.
Gerät nie unbeaufsichtigt stehen lassen.
Keine Gegenstände und/oder Finger in Geräteöffnungen stecken.
Brennende Geräte nur mitschdecke schen.
Inbetriebnahme / Bedienung
Hinweis: Stellen Sie sicher, dass zwischen dem Heizer und der Wand oder
anderen grossen Objekten immer gegend Platz ist (> 50 cm). Der Luftstrom
darf nicht durch etwaige Objekte blockiert werden. Wenn Anna big in ei-
nem Badezimmer verwendet wird, muss ein Mindestabstand von 100 cm zu
den Gefahren verstanden haben, vorausgesetzt, dass das Gerät in seiner
normalen Gebrauchslage platziert oder installiert ist.
Kinder ab 3 Jahren und jünger als 8 Jahre dürfen das Get nicht an
das Stromnetz anschliessen, es nicht regulieren oder reinigen und keine
Wartung durchführen.
Wenn das Netzkabel bescdigt ist, muss es vom Hersteller oder in einer
vom Hersteller zugelassenen Werkstatt oder von ähnlich qualifizierten
Personen ersetzt werden, um Gefahren zu vermeiden.
Dusche, Badewanne, Wasserhahn, Waschbecken, etc. eingehalten werden.
1. Nachdem Sie Anna big am gewünschten Ort platziert haben, schliessen
Sie das Kabel (1) an der Steckdose an.
2. Drücken Sie zuerst auf den Hauptschalter (4) auf der Geräterückseite.
3. Schalten Sie das Gerät ein, indem Sie auf die Ein/Aus-Taste (6) drücken.
Auf dem Display erscheint die Ziel-Temperatur.
4. Die Ziel-Temperatur kann über das rechte Bedienfeld (8) «Temperature»
verändert werden, von 0 °C (Kühlungsmodus) bis 35 °C oder maximal
«Hi». Von 1 ° 35 °C & «Hi» ist der rmemodus aktiv. Die Zahl blinkt
im Einstellmodus. Auf «tippen, erht die Ziel-Temperatur. Auf «–»
tippen verringert die Ziel-Temperatur. Die Einstellung wird gespeichert,
wenn 3 Sekunden lang keine Veränderung auf dem Bedienfeld erfolgt.
Danach zeigt das Display die aktuelle Raumtemperatur an.
Info: Wird die Ziel-Temperatur erreicht, schaltet das Gerät das Heiz-
element aus und auf dem Display blinkt die Temperaturanzeige. Der
Ventilator bleibt noch während 30 Sekunden auf der untersten Stufe
eingeschaltet, um das Heizelement abzukühlen. Die aktuelle Temperatur
wird dann ca. alle 30 Minuten gemessen (der Ventilator uft für 1 Minu-
te auf unterster Stufe). Sinkt die gemessene Raumtemperatur unter die
eingestellte Ziel-Temperatur, schaltet das Gerät wieder ein.
5. Kühlungsmodus: wird die Temperatur auf 0 °C eingestellt, schaltet das
Heizelement aus und der Ventilator bläst kühle Luft aus dem Get. Das
LED Statuslicht (7) wechselt von rot auf blau. Auf dem Display erscheint
im Kühlungsmodus keine Temperaturanzeige.
6. -Die Heizleistungsstufe kann über das linke Bedienfeld (9) «Power Le
vel» verändert werden, von niedrig bis hoch. Die Anzeige blinkt während
der Eingabe. Auf «+» tippen, erht die Leistungsstufe. Auf «–» tippen,
verringert die Leistungsstufe. Die Einstellung wird gespeichert, wenn 3
Sekunden lang keine Venderung auf dem Bedienfeld erfolgt. Danach
zeigt das Display die aktuelle Raumtemperatur an.
7. Der Auto Modus wird durch Dcken der «Auto Mode» Taste (10) ak-
tiviert, im Display wird «Auto Mode» angezeigt. Die voreingestellte
Ziel-Temperatur von 22 °C kann über das rechte Bedienfeld (8) verän-
dert werden. Die Heizleistungsstufe wird im Auto Modus automatisch
gewählt, in Abhängigkeit zur Raumtemperatur. Je kleiner die Differenz
zwischen Raumtemperatur und Ziel-Temperatur, desto kleiner die ge-
hlte Heizleistungsstufe. Diese Technologie nennen wir «Adaptive
HeatTM» und haben wir international zum Patent angemeldet. Damit
stellt Anna big sicher, dass die Ziel-Temperatur schnell und effizient er-
reicht und beibehalten wird. Anna big verhindert dadurch einen starken
Temperaturabfall sowie ein ständiges Ein- und Ausschalten des Geräts.
Wird die Heizleistungsstufe manuell vendert (9), wird der Auto Modus
deaktiviert.
Info: Wird die Ziel-Temperatur erreicht, schaltet das Gerät das Heizele-
ment aus und auf dem Display blinkt die Temperaturanzeige.
8. Schalten Sie das Gerät aus, indem Sie auf die Ein/Aus-Taste (6) drücken.
Der Ventilator bleibt noch während 30 Sekunden auf der untersten Stu
-
fe eingeschaltet, um das Heizelement abzukühlen. Das Get speichert
die Eingabe der Temperatur und der Heizleistungsstufe, auch wenn das
Gerät ausgeschaltet wird.
9. Überhitzungssicherung: das Gerät ist mit einer Überhitzungssicherung
ausgestattet, die bei einer technischen Störung oder bei unsachgemäs-
sem Einsatz das Gerät ausschaltet (der Ventilator läuft einige Zeit auf
der untersten Stufe weiter, um das Gerät abzukühlen). Sollte dieser Fall
eintreten, beseitigen Sie die Srung bzw. korrigieren Sie den Einsatz
(z.B. > 50 cm Platz ums Get, Gerät nicht abdecken, Get aufrecht auf-
stellen). Das Gerät kann wieder in Betrieb genommen werden, wenn das
Gerät abgekühlt ist.
10. Die Temperaturanzeige kann durch Drücken der «Auto Mode» Taste (10)
hrend 5 Sekunden von Celsius zu Fahrenheit und umgekehrt gewech-
selt werden.
11. In den ersten Stunden nach der Inbetriebnahme von Anna big kann es
zu einem unangenehmen Geruch kommen. Dieser Geruch wird sich von
selbst auflösen und ist kein Grund zur Sorge. Tipp: Auf der ckseite
von Anna big befindet sich der Lufteinlass. Der Lufteinlass ist mit einem
Luftfilter und einem Gitter abgedeckt. Das Gitter ist abnehmbar. Bitte
nehmen Sie das Gitter und anschließend den Luftfilter ab. Sie können
den Luftfilter mit etwas Seife und warmem Wasser auswaschen. S-
len Sie den Luftfilter gut aus und lassen Sie ihn vollständig trocknen,
bevor Sie ihn wieder auf den Lufteinlass setzen und das Gitter erneut
anbringen.
Reinigung
Vor jeder Wartung, Reinigung und nach jedem Gebrauch das Gerät ausschal-
ten und das Netzkabel (1) von der Steckdose trennen.
Achtung: Das Gerät nie ins Wasser tauchen (Kurzschlussgefahr).
-Zur äusseren Reinigung nur mit einem feuchten Lappen abreiben und da
nach gut trocknen.
Sollte der Filter (11) beim Einlassgitter (13) verstaubt sein, entfernen Sie
diesen und waschen ihn oder reinigen ihn mit dem Staubsauger.
Reparaturen
Reparaturen an Elektrogeräten (Wechseln des Netzkabels) dürfen nur
von instruierten Fachkräften durchgeführt werden. Bei unsachgemässen
Reparaturen erlischt die Garantie und jegliche Haftung wird abgelehnt.
-Nehmen Sie das Gerät nie in Betrieb, wenn ein Kabel oder Stecker be
schädigt ist, nach Fehlfunktionen des Gerätes, wenn dieses herunterge-
fallen ist oder auf eine andere Art beschädigt wurde (Risse/Brüche am
Gehäuse).
Nicht mit irgendwelchen Gegensnden in das Gerät eindringen.
Ausgedientes Get sofort unbrauchbar machen (Netzkabel durchtren-
nen) und bei der dafür vorgesehenen Sammelstelle abgeben.
Entsorgung
Die europäische Richtlinie 2012 / 19 / CE über Elektro- und Elektronik-Alt-
geräte (WEEE) verlangt, dass elektrische Haushaltsgete nicht über den
Restmüll oder sonstigen Haushaltsabfall entsorgt werden dürfen, sondern
an Sammelpunkten r das Recycling von elektrischen und elektronischen
Geräten abgegeben werdenssen. So können die Verwertung der enthal-
tenen Materialien optimiert und ihre Auswirkungen auf die menschliche Ge-
sundheit und die Umwelt reduziert werden. Das durchgestrichene
Abfalltonnensymbol auf dem Produkt erinnert Sie an diese Ver-
pflichtung. Bitte fragen Sie bei Ihrer Gemeindeverwaltung nach
der zuständigen Entsorgungsstelle.
Technische Daten
Nennspannung 220 – 240 V / 50 Hz
Temperaturbereich 0 ° – 35 °C / > 35 °C = Hi
Leistungsaufnahme 300 W (min.)
Nennleistung 2‘000 W (max.)
Abmessungen 183 x 420 x 183 mm
(Breite x Höhe x Tiefe)
Gewicht 3.2 kg
Schalldruckpegel 28 50 dB(A)
Erfüllt EU-Vorschrift CE / WEEE / RoHS / EAC
Technische Änderungen vorbehalten
Angabe Hersteller /
Marke
Typ /
Model
Technische
Daten
Heizelement Foshan Shunde Esite
Electrical Appliances Co. Ltd 2000 W
AC 220 - 240 V
50 Hz
650Wx3
Lüftermotor Foshan Shunde Esite
Electrical Appliances Co. Ltd EST1225S
DC 12 V
2500 rpm
8.4 W Class A
Angabe Symbol Wert Einheit
rmeleistung
Nennwärmeleistung Pnom 1.41 kW
Mindestwärmeleistung (Richtwert) Pmin 0.4 kW
Max. kontinuierliche Wärmeleistung Pmax,c 2.0 kW
Hilfsstromverbrauch
Bei Nennwärmeleistung elmax 0.0064 kW
Bei Mindestwärmeleistung elmin 0.0044 kW
Im Bereitschaftszustand elSB 0 kW
Angabe Einheit
Art der Regelung der Wärmezufuhr
manuelle Regelung der Wärmezufuhr mit integriertem Thermostat [nein]
manuelle Regelung der Wärmezufuhr mit ckmeldung der
Raum- und/oder Außentemperatur [nein]
elektronische Regelung der Wärmezufuhr mit Rückmeldung der
Raum- und/oder Außentemperatur [nein]
rmeabgabe mit Gebläseunterstützung [nein]
Art der Wärmeleistung / Raumtemperaturkontrolle
einstufige Wärmeleistung, keine Raumtemperaturkontrolle [nein]
zwei oder mehr manuell einstellbare Stufen,
keine Raumtemperaturkontrolle [nein]
Raumtemperaturkontrolle mit mechanischem Thermostat [nein]
mit elektronischer Raumtemperaturkontrolle [ja]
elektronische Raumtemperaturkontrolle und Tageszeitregelung [nein]
elektronische Raumtemperaturkontrolle
und Wochentagsregelung [nein]
Sonstige Regelungsoptionen
Raumtemperaturkontrolle mit Präsenzerkennung [nein]
Raumtemperaturkontrolle mit Erkennung oener Fenster [nein]
mit Fernbedienungsoption [nein]
mit adaptiver Regelung des Heizbeginns [nein]
mit Betriebszeitbegrenzung [nein]
mit Schwarzkugelsensor [nein]
Kontaktangaben Stadler Form Aktiengesellschaft
Chamerstrasse 174, 6300 Zug, Switzerland
licitations ! Vous venez d‘acheter le superbe chauffage d’appoint ANNA
big. Nous espérons que cet appareil vous donnera entière satisfaction et
améliorera l’air intérieur pour vous.
Comme pour tous les appareils nagers électriques, il est important d’en-
tretenir cet appareil correctement afin déviter les blessures, les incendies ou
les dommages. Veuillez lire attentivement le présent mode d’emploi avant la
mise en service et respecter les conseils de sécurité indiqués sur l’appareil.
Description de lappareil
L’appareil est composé des éléments principaux suivants :
1. Cordon électrique pour l’alimentation
2. Base en zinc
3. Boîtier
4. Interrupteur principal pour l’alimentation
5. Panneau tactile (dispositif de contle tactile)
6. Touche Marche/Arrêt
7. Lumière LED (rouge = chauffe, bleu = refroidissement)
8. Panneau de configuration pour la sélection de la température : 0° à
35 °C ou maximum « Hi »
9. Panneau de configuration pour la sélection du niveau de sortie de la
chaleur : faible à élevé (8 niveaux)
10. Touche pour le Mode Auto, symbole « Auto Mode »
11. Grille avec filtre à air lavable
12. Poignée de transport
13. Grille d’entrée d’air
14. Grille sortie d‘air
Conseils de sécurité importants
Veuillez lire attentivement le mode d‘emploi avant la première mise en ser-
vice de lappareil et conservez-le pour toute consultation ultérieure ou remet-
tez-le, le cas échéant, au nouveau propriétaire.
Fraais
Ce produit convient aux espaces bien isolés ou à un usage occasionnel
uniquement.
ATTENTION – Certaines parties de ce produit peuvent devenir très
chaudes et causer des brûlures. Une attention particulière doit être
accordée aux enfants et personnes vulrables présentes.
Cet appareil peut être utilisé par des enfants de 8 ans et plus et des
personnes dont les capacités physiques, sensorielles ou mentales sont
diminuées, ou manquent d‘expérience et de connaissances si elles ont
été formées ou encadrées pour l‘utilisation de l‘appareil d‘une manière
sécuritaire, et elles sont conscientes des risques encourus. Les enfants
ne doivent pas jouer avec cet appareil. Le nettoyage et l‘entretien de
l‘utilisateur ne doivent pas être effectués par des enfants sans surveil-
lance.
Les enfants de moins de 3 ans doivent être tenus à l‘écart sauf s‘ils sont
surveillés de façon continue.
Les enfants entre 3 et 8 ans ne sont autorisés qu‘à allumer/éteindre
-La société Stadler Form décline toute responsabilité des dommages résul
tant du non-respect des indications données dans ce mode d‘emploi.
Cet appareil ne doit être utiliquaux fins domestiques décrites dans ce
mode demploi. Toute utilisation contraire à sa destination ainsi que toute
modification technique appore à l’appareil peut entraîner des risques pour
la santé et la vie.
Ne mouillez jamais l‘appareil (risque de court-circuit).
Ne jamais utiliser d’appareils endommagés (y compris cordons électriques).
Ne jamais toucher des pièces se trouvant sous tension.
-Ne branchez le câble qu’au courant alternatif. Utiliser l’appareil en respec
tant le voltage correct et uniquement sur une prise installée par un profes-
sionnel. Ne pas utiliser de rallonge électrique.
L‘appareil de chauffage ne doit pas être placé juste en dessous d‘une prise
de courant.
Ne jamais ouvrir l’appareil (réparations uniquement par des professionnels).
Ne pas faire passer ou coincer le câble d’alimentation par-dessus des arêtes
vives. Ne jamais retirer la fiche de courant de la prise en tirant sur le câble
d’alimentation ou en ayant les mains mouillées.
Ne pas placer l’appareil à proximité directe d’une source de chaleur. Ne
pas exposer le câble d’alimentation à la chaleur (comme p. ex. une plaque
chaude de cuisinière, flammes nues, semelle chaude de fer à repasser ou
poêles). Protéger le câble d’alimentation de tout contact avec de l’huile.
La prise de courant utilisée doit rester accessible en tout temps.
Ne jamais utiliser l‘appareil sur des surfaces inégales ou molles.
PRÉCAUTION : Afin d‘éviter tout danger dû au armement intempestif du
coupe-circuit thermique, cet appareil ne doit pas être alimenté par l‘inter-
diaire d‘un interrupteur externe, comme une minuterie.
ATTENTION : Pour éviter la surchauffe, ne couvrez pas l’entrée et la sortie
d’air – risque d’incendie !
Ne pas utiliser l‘appareil dans les petites pces (de moins de 4 m2), dans un
environnement explosif ou pour faire sécher du linge.
-Ne jamais toucher la partie avant de l’appareil, elle peut atteindre des tem
ratures très élevées.
Ne jamais laisser l’appareil sans surveillance.
Ne pas introduire d’objets et/ou mettre les doigts dans les ouvertures de
l’appareil.
Jeter une couverture isolante sur les appareils en flammes pour éteindre
le feu.
Mise en marche / Manipulation
Remarque : Veillez à placer le radiateur à une certaine distance du mur ou
d’autres gros objets (> 50 cm). Cela permet au flux d’air de s’écouler sans en-
l‘appareil à condition que celui-ci soit placé ou installé dans son empla-
cement d‘utilisation ordinaire pvu et que les enfants aient éfors
ou encadrés pour l‘utilisation de l‘appareil d‘une manière sécuritaire, et
ils sont conscients des risques encourus. Les enfants entre 3 et 8 ans ne
sont pas autorisés à brancher l‘appareil, faire des réglages ou effectuer le
nettoyage et l‘entretien de l‘utilisateur.
Pour éviter tout danger, faites remplacer le cordon dalimentation
endommagé par le fabricant, un agent agréé ou une personne qualifiée.
trave. Le flux d’air ne doit être bloqué par aucun objet. Si Anna big est installé
dans la salle de bains, veillez à conserver une distance de sécurité d’au moins
100 cm entre l’appareil et les douches, baignoires, robinets, lavabos, etc.
1. Une fois que vous avez placé Anna big à lendroit prévu, branchez le cor-
don d’alimentation (1) à une prise secteur
2. Appuyez sur l’interrupteur principal à l’arrière de l’appareil pour sa mise
sous tension (4).
3. Appuyez sur la touche Marche/Art (6) pour allumer l’appareil. La tempé-
rature souhaitée appart sur laffichage.
4. La température souhaie peut être modifiée de 0 °C (mode refroidisse-
ment) à 35 °C ou sur le maximum «Hi» à laide du panneau de configura-
tion (8) «Temperature» situé à droite. Le mode de chauffe est actif de 1 °
à 35 °C et pour le maximum «Hi». En mode configuration, le nombre cli-
gnote. Appuyez sur «pour augmenter la température à la valeur souhai-
e. Appuyez sur «» pour réduire la température à la valeur souhaitée.
Le réglage est sauvegarsi aucune modification de température n’est
alisée pendant trois secondes. La température actuelle de la pièce
s’affiche en conquence.
Information : L’appareil éteint le chauffage quand la température sou-
haitée est atteinte, et l’indicateur de température clignote sur l’affichage.
Le ventilateur fonctionne encore pendant 30 secondes à son niveau le
plus bas pour évacuer la chaleur. La température actuelle est alors mesu-
e env. toutes les 30 minutes (le ventilateur fonctionne encore pendant
1 minute à son niveau le plus bas). Si la température de la pièce est plus
basse que la température souhaitée, l’appareil se remet en marche.
5. Mode refroidissement : le chauffage s’éteint si la température est réglée
à 0 °C et que le ventilateur rejette de l’air froid de lappareil. L’éclairage
LED (7) passe du rouge au bleu. En mode refroidissement, aucune tempé-
rature n’apparaît sur l’affichage.
6. Le niveau de sortie de la chaleur, allant de faible à élevé, peut être modi-
fié à laide du panneau de configuration (9) «Power Level» situé à gauche.
L’affichage clignote pendant la saisie. Appuyez sur «+» pour augmenter
le niveau de sortie de chaleur. Appuyez sur «» pour duire le niveau
de sortie de chaleur. Le glage est sauvegardé si aucune modification
de sortie dair n’est alisée pendant trois secondes. La température
actuelle de la pièce s’affiche en conquence
7. Pour activer le mode Auto, appuyez sur la touche « Auto Mode » (10).
« Auto Mode » apparaît sur l’affichage. La température d’origine, 22 °C
peut être modifiée à laide de la sélection de température (8) sur le
droit du panneau de configuration. Le niveau de sortie de la cha-
leur se gle automatiquement en mode auto, selon la température de
la pièce. Le niveau de sortie de chaleur sélectionné sera plus petit si
la différence entre la température de la pièce et celle souhaitée n’est
pas grande. Nous faisons référence à cette technologie sous le nom
« Adaptive Heat™ » et avons introduit une demande de brevet internatio-
nal. Anna big assure et maintient donc lobjectif de température souhai-
e efficacement et rapidement. Il prévient de grandes chutes de tempé-
rature et évite que l’appareil ne s’éteigne et ne se rallume constamment.
Le mode auto se désactive si le niveau de sortie de la chaleur est modif
manuellement (9).


Product specificaties

Merk: Stadler Form
Categorie: Heater
Model: Anna BIG

Heb je hulp nodig?

Als je hulp nodig hebt met Stadler Form Anna BIG stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Heater Stadler Form

Handleiding Heater

Nieuwste handleidingen voor Heater