Speco Technologies H8B8M Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Speco Technologies H8B8M (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
 User Manual
Thank you for purchasing our product. Speco Technologies is constantly developing and
improving products. We reserve the right to modify product design and specifications
without notice and without incurring any obligation.
H8D8M/H8B8M/H8T8M
1
Warnings
β–  If the product does not work p rop erly, please contact the d ealer or where the product was p urchased .
Speco Tech nologies is not respons ible for any problems caused by improper operation or repair.
β–  Do not expose th e unit to heav y stress, vio len t vibration or lon g-term expo sure to water and humid ity
during transportation, storage, and/or installation.
β–  Do not install near sou rces o f heat.
β–  Only ins tall the produ ct in environments inside the specification operating temperature and hu mid ity
rang e.
β–  Do not install the camera near po wer lines, radar equipment or other electro mag netic radiation.
β–  Do not block any ventilatio n openings if any.
β–  Use all the weatherproofing hardware req uirement to minimize weather intrusion.
This camera series is th e latest techno logy and advanced circuit design , which features high definition and
sensitiv ity, low noise and distortion and supp orts HD video transmission with the common coaxial cable,
ensu rin g the requirement of the HD monitoring in the traditional surveillance system.
Introduction
● Hig h Reso lu tion
Adopt high performance sensor, providin g hig h d efinition and clear image.
● Hig h Transmission Performance
Real time transmission with high sp eed and lon g distance- .
● DNR
Reduce noise from brightness and colo r sign al .
● OSD
Access the camera settings which can be clearly disp lay ed through the main menu.
● White Balance
Adju st the co lor temperature according to the en vironmen t automatically.
● AGC
Adju st th e gain of amplifier, enabling th e camera to outpu t the stan dard video s ig nal in different
ligh ting condition.
● Backlight Compensation BLC ( )
When the back of the captured o bject is too mu ch b rig h t, yo u can set BLC fo r the captured object to
mak e it clearer.
● Backlight Compensation BLC ( )
When the back of the captured object is too much bright, you can set BLC for the captured object to
make it clearer.
Cables
Power Cable
Video Output
Video Switch Cable
Video Switch: Four video output modes can be optional--AHD, TVI, CVI and CVBS
(a) remove the cover of the video switch cable; (b) hold and press the button in the video
switch cable for 5 seconds to switch the current video output.
2
Before you start, please make sure that the wall or ceiling is s tro ng en ou gh to with st and t hre e ti mes
th e w eig ht o f t he camera. Please install and use the camera in the dry environment.
You’d better install back the lens cover or lower dome less than 4 hours after removing it.
The mounting types of cameras are only for reference.
Installation
β–ΊMounting for H8B M 8
1. Drill the screw holes and the cable hole on the wall according to the drill template.
2. Route and connect the cables .
3. Secure the mounting base with camera to the wall with screws as shown below.
βˆ…4.6
βˆ…25.1
βˆ…82.0
βˆ…72.2
120Β°
120Β°
62.5mm
18.1mm
36.1mm


Product specificaties

Merk: Speco Technologies
Categorie: Niet gecategoriseerd
Model: H8B8M

Heb je hulp nodig?

Als je hulp nodig hebt met Speco Technologies H8B8M stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Speco Technologies

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd