Soundcraft Vi Option Cards Handleiding


Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Soundcraft Vi Option Cards (41 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/41
Soundcraft Vi Seriesโ„ข Cards 0720
Page 1
TECHNICAL INFORMATION
Vi Series Standard & Optional I/O Cards
Issue 0620
Standard Cards
Line Input Card
Line Output Card
Mic/Line Input Card
AES/EBU I/O Card
MADI I/O Cards
MADI HD Cards
GPIO Card with relay outputs
Ext Sync Card
Optional Cards
CobraNetโ„ข Interface Card
Aviom A-NETยฎ Interface Card
EtherSoundยฎ Interface Card
ADAT I/O Card
SDI In Card
SDI I/O Card
Dolbyยฎ D/E Decoder Card
Soundcraft Vi Seriesโ„ข Cards 0720
Page 2
LINE IN CARD RS2425
Eight-channel line input card with 24 bit, 44.1/48/88.2/96 kHz A/D
Converter, delta-sigma conversion. Transformer-balanced inputs. 96 kHz,
88.2 kHz, 48 kHz, or 44.1 kHz operation. 7...26 dBu input sensitivity. โ€œSignal
presentโ€ LED indicator. Inputs on standard 25-pin D-type connector (female).
Input level (for 0 dBFS) 15/24 dBu (๎›€xed, jumper-selectable)
or 7...26 dBu (adjustable)
Input impedance > 10 kฮฉ
Frequency response (20 Hz...20 kHz) -0.2dB
THD&N (35 Hz...20 kHz, โ€“1 dBFS, 15 dBu setting) < โ€“97 dBFS
(1 kHz, โ€“30 dBFS, 15 dBu setting) < โ€“111 dBFS
Crosstalk (1 kHz) < โ€“110 dB
Input delay (local) 38 samples (0.79 ms @ 48 kHz)
(remote) 45 samples (0.94 ms @ 48 kHz)
Current consumption (7 V) 0.42 A
(ยฑ15 V) 0.1 A
Operating temperature 0...45ยฐ C
A
D
A
D
A
D
A
D
๎˜๎˜๎˜๎˜๎˜๎˜ ๎˜ ๎˜๎˜๎˜
๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜ ๎˜๎˜
๎˜๎˜๎˜ ๎˜๎˜๎˜๎˜๎˜ ๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜
๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜
A๎˜๎˜๎˜๎˜๎˜๎˜๎˜ ๎˜๎˜
๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜
๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜
๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜
๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜
๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜
๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜
๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜
๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜๎˜
Soundcraft Vi Seriesโ„ข Cards 0720
Page 3
Level Ch 1
Ch 1 Ch 3 Ch 2 Ch 4
Ch 5 Ch 7 Ch 6 Ch 8
Level Ch 3
Level Ch 5
Level Ch 7
24 dBu
15 dBu
24 dBu
15 dBu
Level Ch 2
Level Ch 4
Level Ch 6
Level Ch 8
Jumpers: Level (Ch1...8) Two positions each: 15 dBu (factory default) or 24 dBu.
LEDs: SIGNAL 1...8 For each of the eight channels a green LED indicates if input signal is present;
its brightness is a rough indication of the signal level.
Alignment: RA1...8 The multi-turn trimmer gives ๎›€ne adjustment of the input level set with the
jumpers. The factory default is +22dBu in = 0dBFS.
If a different input sensitivity has to be adjusted, select the desired range with
the jumper and use the LEVEL trimmer potentiometer to adjust to the desired
level. Repeat this alignment for all inputs.
Connector Pin Assignment: 8x BALANCED LINE IN (25pin D-type, female, UNC 4-40 thread)
Pin Signal Pin Signal
1 CH 8 in + 14 CH 8 in โ€“
2 CH 8 in GND 15 CH 7 in +
3 CH 7 in โ€“ 16 CH 7 in GND
4 CH 6 in + 17 CH 6 in โ€“
5 CH 6 in GND 18 CH 5 in +
6 CH 5 in โ€“ 19 CH 5 in GND
7 CH 4 in + 20 CH 4 in โ€“
8 CH 4 in GND 21 CH 3 in +
9 CH 3 in โ€“ 22 CH 3 in GND
10 CH 2 in + 23 CH 2 in โ€“
11 CH 2 in GND 24 CH 1 in +
12 CH 1 in โ€“ 25 CH 1 in GND
13 n.c.
1
Solder/Crimp View
(or Socket View)
13
25
14


Product specificaties

Merk: Soundcraft
Categorie: Niet gecategoriseerd
Model: Vi Option Cards

Heb je hulp nodig?

Als je hulp nodig hebt met Soundcraft Vi Option Cards stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Soundcraft

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd