Soundcore P30i Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Soundcore P30i (4 pagina's) in de categorie Hoofdtelefoon. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
APP
Download the soundcore app to experience Adaptive Noise Cancelling, Find Earbuds, dual connections, firmware updates, and more exciting features.
If your earbuds cannot connect with the soundcore app, re-install the app or update it to the latest version in your mobile app store.
Click this link to download: http://dl-soundcore.soundcore.com/qcdl?flow=soundcore
WEARING
Choose the ear tips that fit your ears best and take a fit test in the soundcore app to ensure you get the best ANC performance.
Note: Medium ear tips come attached to the earbuds.
* Dust, earwax, or other debris can accumulate in the earbuds. To maintain optimal sound quality, regularly clean
your earbuds by using a cotton swab slightly moistened with rubbing alcohol to gently wipe the metal mesh
filter under the rubber ear tips.
USING THE PHONE HOLDER
The charging case can also be used as a mobile phone holder.
Unfold the phone holder as shown. Then you can place your phone on the holder.
POWERING ON AND PAIRING
1. Peel off the protective film on the earbuds.
2. Return the earbuds to the charging case and close the case. Then reopen the charging case.
3. Take out the earbuds. The earbuds will automatically power on and enter pairing mode. Select " " from your device's Bluetooth list.soundcore P30i
* When taken out, the earbuds will automatically power off after 30 minutes if they are not connected.
The duration can be set in the soundcore app.
PAIRING WITH A NEW DEVICE
To pair with a new device, press and hold the touch areas of both earbuds simultaneously for 3 seconds to enter pairing mode.
CHARGING
1. Place the earbuds in the charging case and close it.
• Fully dry off the earbuds and the USB-C charging port before charging.
2. Connect the charging case to a power supply by using the provided USB-C charging cable.
* A full battery recharge takes about 2.5 hours and 10 minutes of charging offers 2 hours of playtime.
DUAL CONNECTIONS
To connect the earbuds with two Bluetooth devices at the same time, first open the soundcore app, go to settings, and select Dual Connections > Enable
Dual Connections > Connect New Device.
CONTROLS
×2: Tap twice 2s: Tap and hold for 2 seconds
*You can also customize controls in the soundcore app.
TWS mode Mono mode
Switch ambient sound modes
(ANC / Transparency / Normal) Tap and hold for 2 seconds (L/R) Tap and hold for 2 seconds
Play / Pause Tap twice (R) Tap twice
Next track Tap twice (L) /
Answer a call Tap twice (L/R) Tap twice
Reject / end a call Tap and hold for 2 seconds (L/R) Tap and hold for 2 seconds
LED INDICATION
You can check the battery level of the charging case through the status of LED indicator.
Place the earbuds into charge case:
If the LED indicator stays on for 4 seconds and then goes off, it means the charging case has sufficient power.
If the LED indicator flashes white for 4 seconds, it means the charging case is at low battery and needs to be charged.
*You can check the battery level of earbuds in the soundcore app.
POWERING OFF
To power off, return the earbuds to the charging case.
RESET
Open the charging case and take out the earbuds, then press and hold the touch areas of both earbuds simultaneously for 10 seconds to reset.
FIRMWARE UPDATE


Product specificaties

Merk: Soundcore
Categorie: Hoofdtelefoon
Model: P30i

Heb je hulp nodig?

Als je hulp nodig hebt met Soundcore P30i stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Hoofdtelefoon Soundcore

Handleiding Hoofdtelefoon

Nieuwste handleidingen voor Hoofdtelefoon