Sony PCWA-A320 Handleiding

Sony Overige computer accessoire PCWA-A320

Lees hieronder de 📖 handleiding in het Nederlandse voor Sony PCWA-A320 (2 pagina's) in de categorie Overige computer accessoire. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

PCWA-AR300

4-674-609-11(1)

Wireless

Broadband Router

Troubleshooting Guide

This document provides solutions to common problems

encountered with the Broadband Router.Wireless

Please refer to this guide before contacting Sony

Customer Information Services.

The PCWA-AR300 consists of:

• Broadband Router Unit PCWA-R1

• Wireless LAN Access Point PCWA-A320

In this document, we refer to the Broadband Router Unit as the

Router Unit and to the Wireless LAN Access Point as the

Wireless Unit.

Preparations

Case 1 No communication between the computer and

Wireless Broadband Router

1Was your computer properly configured for wireless

communication?

When using the Access Point functions under factory default settings, configure the computer as

follows.

The factory default settings of the Access Point function are:

• Network Name (SSID):

The 6-character identifier printed on the label inside the rear cover of the Wireless Unit

• Encryption (WEP):

Disabled

With the Windows Me and Windows 2000 operating systems, perform setup as described in the

documentation of the Wireless LAN PC Card.

With the Windows XP operating system, proceed as follows.

Click “Start”, and then click “Control Panel”.

In “Control Panel”, double-click “Network Connections”.

Note

If “Network Connections” does not appear, click “Switch to Classic View”.

In the “Network Connections” window, right-click the icon of the wireless network to

which you want to connect, and click “View Available Wireless Networks”.

In the “Connect to Wireless Network” dialog box, select the Access Point from

“Available Wireless Networks”, and click “Connect”. (When using the Access Point

functions under factory default settings, check the 6-character identifier printed on

the label inside the rear cover of the Wireless Unit.)

2Are the Network Name (SSID) and Data Encryption (WEP)

settings configured correctly?

To connect to the Access Point, the Network Name (SSID) and Data Encryption (WEP) settings

must be the same at the computer and the Access Point.

z Hint

When using the Access Point functions under factory default settings, use the settings listed in above.1

With the Windows Me and Windows 2000 operating systems, verify the Access Point Network

Name (SSID) and Data Encryption (WEP) settings of the Wireless LAN PC Card as described in

its documentation.

With the Windows XP operating system, proceed as follows to verify the settings.

Open the “Connect to Wireless Network” dialog box as described in above.1

Select the Network Name (SSID) of the Access Point from “Available Wireless

Networks”.

If data encryption is enabled for the Access Point, enter the correct Encryption Key

(Network Key) in the “Data Encryption (WEP)” field.

Click “Connect”.

If the connection is not established, reset the Access Point functions to the factory default

settings as described in “Miscellaneous”, “Case 1: Forgot settings”, and then set up the

Access Point functions again as described in the separate Quick Start Guide.

Continued on next page

3Can the IP address of the computer be acquired?

With the computer setting “Obtain IP address automatically” enabled, perform the following

steps. For information on how to set the IP address of the computer, see Windows Help.

Windows Me operating system

Click “Start”, and click “Run”.

In the dialog box used to specify the file name, enter “winipcfg” (exclude the

quotation marks) and click “OK”.

From the list in the “IP Setup” dialog box, select the Wireless LAN interface that you

are using (PC card, computer internal wireless LAN, etc.).

Make sure that an IP address is shown in the “IP address” field.

If the IP address is “0.0.0.0” or an address starting with “169.254.” is displayed, click

“Release”, and then “Renew”.

Note

If an IP address starting with “169.254.” is displayed, a suitable IP address was not obtained with

“Obtain IP address automatically” and your Windows operating system assigned an address to the

Wireless LAN PC Card or Wireless LAN Converter. In this condition, correct network connection is not

possible. Perform the setup again as described in the separate Quick Start Guide.

Windows 2000 and Windows XP operating systems

Click “Start”, point to “Programs” (“All Programs” when using the Windows XP

operating system) and then “Accessories”, and click “Command Prompt”.

In the command prompt window, enter “ipconfig /all” (exclude the quotation marks)

and press the Enter key.

Verify the IP address setting information of the Wireless LAN interface that you are

using (PC card, computer internal wireless LAN, etc.).

z Hint

The “Description” field shows the name of the Wireless LAN interface.

If the IP address is “0.0.0.0” or an address starting with “169.254.” is displayed,

enter “ipconfig /renew” (exclude the quotation marks) and press the Enter key.

A new IP address is assigned.

Note

If an IP address starting with “169.254.” is displayed, a suitable IP address was not obtained with

“Obtain IP address automatically” and your Windows operating system assigned an address to the

Wireless LAN PC Card or Wireless LAN Converter. In this condition, correct network connection is not

possible. Perform the setup again as described in the separate Quick Start Guide.

Connections

Case 1 Cannot display the Setup Page (error message

appears)

If entering “http://192.168.11.1” in the address field of the Web browser does not open the Setup Page,

check the following.

1Can the IP address of the computer be acquired?

See “Preparations”, “Case 1: No communication between the computer and Wireless Broadband

Router”, item 3.

2Are the Access Point and Router Unit power connections

correct?

When powered properly, the Status indicator of the Router Unit is lit and the Status indicator of

the Access Point is flashing slowly.

3Is the AC adapter power switch on?

Make sure that the AC adapter is properly connected and verify that the power switch is on.

z Hint

When the AC adapter power switch is on, the LED on the adapter is lit.

4Is the Ethernet cable correctly connected?

Make sure that an end of the Ethernet cable is connected to a LAN connector of the Router Unit.

Connect the other end of the Ethernet cable to your computer.

z Hint

The Ethernet port of your computer is on its back panel.

5Is the Windows XP “Internet Connection Firewall” function

enabled?

If the “Internet Connection Firewall” function is enabled, communication may not be possible.

Follow the procedure below to check or change the settings.

Click “Start”, and then click “Control Panel”.

In “Control Panel”, double-click “Network Connections”.

Note

If “Network Connections” does not appear, click “Switch to Classic View”.

In the “Network Connections” window, right-click the icon of the wireless network

that you want to use, and click “Properties”.

Click the “Advanced” tab and (if selected) clear the “Protect my computer and

network by limiting or preventing access to this computer from the Internet” check

box.

Click “OK”.

z Hint

Refer to Windows XP Help for details about the “Internet Connection Firewall” function.

Note

Make sure that you take appropriate security measures when the “Internet Connection Firewall” function

is disabled. Except when configuring the Access Point, it is strongly recommended that you enable the

“Internet Connection Firewall” function at all times.

Power switch

a: Off

? : On

Cable modem or DSL modem

LED

Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil

based ink.

• Sony, VAIO, , , and the Eco Info logo are trademarks of Sony Corporation.

• Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other

countries.

• In this manual, Microsoft® Windows® Millennium Edition is referred to as Windows Me, Microsoft® Windows®

2000 Professional is referred to as Windows 2000, Microsoft

® Windows® XP Home Edition and Microsoft®

Windows® XP Professional are referred to as Windows XP.

• Netscape is a registered trademark of Netscape Communications Corporation.

• All other names of systems, products and services are trademarks of their respective owners. In the manual, the ™

or ® marks are not specified.

Contents

Preparations

• No communication between the computer and

Wireless Broadband Router ........................................................................ Case 1

Connections

• Cannot display the Setup Page (error message appears) .......................... Case 1

Router Functions

• The Internet Gateway is shown as a network connection.

What does this mean? ................................................................................ Case 1

• Cannot connect to the Internet .................................................................... Case 2

• I changed the LAN settings of the Router Unit, but I can no longer

connect to the Router Unit or network ........................................................ Case 3

Access Point Functions

• Clicked the “Refresh” button under “Access Point List”, but nothing

appears in the list ........................................................................................ Case 1

• Several Access Points are listed, but I do not know which one to select .... Case 2

• Unable to connect after Access Point functions settings are made ............ Case 3

• If “Easy Setup” is used after “Advanced Setup”,

what about items not included in “Easy Setup”? ......................................... Case 4

Miscellaneous

• Forgot settings ............................................................................................ Case 1

• The power cord is plugged to the AC outlet, but the indicators

do not light .................................................................................................. Case 2

• After pressing the Quick Setup switch, the Status indicator

starts flashing red ........................................................................................ Case 3

6Is the Web browser of the computer used for the Wireless

Broadband Router setup configured to use a proxy server?

Make sure that no proxy setting is enabled for the IP address of the Wireless Broadband Router.

Note

While the proxy server setting is disabled, it may not be possible to display other pages except for the Wireless

Broadband Router Setup Page.

Example 1: Using Microsoft® Internet Explorer

On the “Tools” menu, click “Internet Options”.

The “Internet Options” dialog box appears.

On the “Connection” tab, click “LAN Settings”.

The “Local Area Network (LAN) Settings” dialog box appears.

z Hint

If there are dial-up profiles in the “Dial-up” box, make sure that you select the “Never dial a connection”

check box.

If “Use a proxy server for your LAN (These settings do not apply to dial-up or VPN

connections)” check box is selected, clear the check box and click “OK”.

When the Wireless Broadband Router setup is complete, return the proxy setting to

its original condition.

Example 2: Using Netscape

Start the Web browser on the computer used for the Wireless Broadband Router

setup.

On the “Edit” menu, click “Setup”.

In “Category”, click “Advanced” and click the “Proxy” button.

Select “Connect directly to the Internet” and click “OK”.

When the Wireless Broadband Router setup is complete, return the proxy setting to

its original condition.

Access Point Functions

Case 1 Clicked the “Refresh” button under “Access Point

List”, but nothing appears in the list

1Did you wait long enough?

The scanning process may take some time. After clicking “Refresh”, wait at least 30 seconds

before checking the results.

2Can the IP address of the computer be acquired?

See “Preparations”, “Case 1: No communication between the computer and Wireless Broadband

Router”, item 3.

3Is the Access Point connected correctly to the Router Unit?

Make sure that connections are as shown.

Cable modem or

DSL modem

Case 3 Unable to connect after Access Point functions

settings are made

Did you change the wireless connection settings of the computer

to match the Access Point functions settings?

If the Network Name (SSID) and Data Encryption (WEP) settings of the Access Point are changed, the

wireless connection settings of the computer must be changed accordingly. For information on how to

do this, refer to the documentation of the Wireless LAN PC Card or the Wireless LAN Converter.

Case 4 If “Easy Setup” is used after “Advanced Setup”,

what about items not included in “Easy Setup”?

If you reconfigure the unit with “Easy Setup” after using “Advanced Setup”, the items not included in

“Easy Setup” are set as follows.

Item Setting

Frequency (Channel) Auto Select

Broadcast Network Name (SSID) Yes

IEEE 802.11 Mode 11g, 11b

Access Control Accept all

Connection Method Obtain IP address automatically (DHCP)

DNS Server –

Speed Auto-Detect

Setup Switch Enable

Time Server (NTP Server) –

Note

In the table above, “–” indicate blank settings.

Reset switch

Quick Setup switch

Reset switch

Case 2 Several Access Points are listed, but I do not

know which one to select

The “Access Point List” shows the MAC addresses of all the Access Points found.

Use the MAC address to identify the Access Point.

Check the MAC address of the Access Point to which you want to connect. The MAC address is

located on the label inside the rear cover of the Wireless Unit.

Case 2 The power cord is plugged to the AC outlet, but

the indicators do not light

1Is the AC adapter power switch on?

zHint

When the AC adapter power switch is on, the LED on the adapter is lit.

2Is the “Status Indicator” setting of the Access Point set to

Off?

Open the Setup Page of the Access Point, go to the Access Point “Management” page, and set

“Status Indicator” to On.

Click “Status Indicator” and “Change”.

Select “On” from the list and click “Execute Setup”.

When the completion message appears, click “Close”.

Case 3 After pressing the Quick Setup switch, the Status

indicator starts flashing red

If the Quick Setup switch is held down for more than one second, the Status indicator starts to flash red.

30 seconds later, the Status indicator begins flashing slowly white to indicate normal operaton.

Note

The Quick Setup switch is used in setting the separately available Wireless LAN Converter PCWA-DE30.

For information on how to use the Quick Setup switch, refer to Wireless LAN Converter PCWA-DE30

Quick Start Guide.

Miscellaneous

Case 1 Forgot settings

Reset the Access Point and/or Router Unit, as described below.

To perform a reset, the Wireless Broadband Router must be on. It is possible to reset both units or only

the unit for which you have forgotten the settings. When you forget the Access Point settings, press the

Reset switch on the Wireless Unit. When you forget the Router Unit settings, press the Reset switch on

the Router Unit. Hold the switch for at least a second, and then release it.

The Wireless Broadband Router restarts automatically, and the settings of the unit whose Reset switch

is pressed revert to their factory defaults. Repeat the setup procedure.

Wireless Unit Router Unit

Note

When resetting the Access Point, be careful not to press the Quick Setup switch by mistake.

Router Functions

Case 1 The Internet Gateway is shown as a network

connection. What does this mean?

It means that the Router Unit is recognized as the Internet Gateway. If you disconnect the Router Unit

from the network, the indication disappears.

Case 2 Cannot connect to the Internet

Are the WAN settings correct?

Configure the Router Unit correctly according to the instructions in the Quick Start Guide.

Case 3 I changed the LAN settings of the Router Unit, but

I can no longer connect to the Router Unit or

network

See “Case 1: No communication between the computer and Wireless Broadband Router”, to release3

and renew the IP address of your computer so that it matches the LAN settings of the Router Unit.

Alternately, you can restart the Router Unit, which automatically releases and renews the IP address of

your computer.

Note

In “Case 1: No communication between the computer and Wireless Broadband Router”,

3, we recommend that

you release and renew the IP address only when it is “0.0.0.0” or it starts with “169.254”. In the case above, you

must release and renew the IP address, regardless of the displayed address.

Product specificaties

Merk:	Sony
Categorie:	Overige computer accessoire
Model:	PCWA-A320

Heb je hulp nodig?

Als je hulp nodig hebt met Sony PCWA-A320 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Overige computer accessoire Sony

Sony PCWA-A220 Handleiding

18 Juni 2023

Sony GDM-500PS Handleiding

14 Juni 2023

Sony GDM-FW9011 Handleiding

31 Mei 2023

Sony PCGA-CCGX Handleiding

28 Mei 2023

Sony GDM-F520 Handleiding

15 Mei 2023

Sony GDM-C520 Handleiding

15 Mei 2023

Sony PRSA-CL1 Handleiding

12 Mei 2023

Sony PCGA-BP4V Handleiding

12 Mei 2023

Sony PCGA-CC1A Handleiding

12 Mei 2023

Sony PCGA-AC19V1 Handleiding

11 Mei 2023

Handleiding Overige computer accessoire

Nieuwste handleidingen voor Overige computer accessoire

Gabor LTS-50 Handleiding

10 December 2024

Gembird NBS-D1-04 Handleiding

10 December 2024

StarTech.com DK30CHHPD Handleiding

7 December 2024

StarTech.com 129UE-USBC-KVM-DOCK Handleiding

7 December 2024

IFM E12247 Handleiding

5 December 2024

Dell Universal Dock UD22 Handleiding

3 December 2024

Sharkoon X-Rest PRO Handleiding

29 November 2024

Sharkoon SHARK XTend 16 Handleiding

29 November 2024

SMK-Link VP3610 Handleiding

26 November 2024

Dell 470-ACWN Handleiding

22 November 2024