Sony LMD-B240 Handleiding

Sony Speaker LMD-B240

Lees hieronder de 📖 handleiding in het Nederlandse voor Sony LMD-B240 (39 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/39

4-587-979-13(1)

Professional

Video Monitor

Operating Instructions

Before operating the unit, please read this manual thoroughly

and retain it for future reference.

LMD-B240

LMD-B170

Software Version 1.1

Owner’s Record

The model and serial numbers are located at the rear.

Record these numbers in the spaces provided below.

Refer to these numbers whenever you call upon your

Sony dealer regarding this product.

Model No.

Serial No.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding-type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety.

If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete

outlet.

Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

Only use attachments/accessories specified by the

manufacturer.

Use only with the cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination to avoid

injury from tip-over.

Unplug this apparatus during lightning storms or

when unused for long periods of time.

Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate

normally, or has been dropped.

WARNING

To reduce the risk of fire or electric shock, do not

expose this apparatus to rain or moisture.

To avoid electrical shock, do not open the cabinet.

Refer servicing to qualified personnel only.

THIS APPARATUS MUST BE EARTHED.

WARNING

When installing the unit, incorporate a readily accessible

disconnect device in the fixed wiring, or connect the

power plug to an easily accessible socket-outlet near the

unit. If a fault should occur during operation of the unit,

operate the disconnect device to switch the power supply

off, or disconnect the power plug.

Attention-when the product is installed in Rack

(For LMD-B240):

1. Prevention against overloading of branch circuit

When this product is installed in a rack and is supplied

power from an outlet on the rack, please make sure that

the rack does not overload the supply circuit.

2. Providing protective earth

When this product is installed in a rack and is supplied

power from an outlet on the rack, please confirm that the

outlet is provided with a suitable protective earth

connection.

3. Internal air ambient temperature of the rack

When this product is installed in a rack, please make

sure that the internal air ambient temperature of the rack

is within the specified limit of this product.

4. Prevention against achieving hazardous

condition due to uneven mechanical loading

When this product is installed in a rack, please make

sure that the rack does not achieve hazardous condition

due to uneven mechanical loading.

Important Safety Instructions

This symbol is intended to alert the user

to the presence of uninsulated “dangerous

voltage” within the product’s enclosure

that may be of sufficient magnitude to

constitute a risk of electric shock to

persons.

This symbol is intended to alert the user

to the presence of important operating

and maintenance (servicing) instructions

in the literature accompanying the

appliance.

5. Install the equipment while taking the operating

temperature of the equipment into

consideration

For the operating temperature of the equipment, refer to

the specifications of the Operation Manual.

6. When performing the installation, keep the

following space away from walls in order to

obtain proper exhaust and radiation of heat.

Lower, Upper: 4.4 cm (1 3/4 inches) or more

Right, Left: 1.0 cm (3/8 inches) or more

For LMD-B240

The ventilation should not be impeded by covering the

ventilation openings with items, such as newspapers,

table-cloths, curtains, etc.

No naked flame sources, such as lighted candles, should

be placed on the apparatus.

For LMD-B170

When installing the installation space must be secured

in consideration of the ventilation and service operation.

Do not block the ventilation slots at the rear panel.

Leave a space around the unit for ventilation.

Leave more than 40 cm of space in the rear of the unit

to secure the operation area.

When the unit is installed on the desk or the like, leave at

least 1U (4.4 cm) or more of space above and below the

unit. Leaving 40 cm or more of space above the unit is

recommended for service operation.

WARNING

The apparatus shall not be exposed to dripping or

splashing. No objects filled with liquids, such as vases,

shall be placed on the apparatus.

CAUTION

The unit is not disconnected from the AC power source

(mains) as long as it is connected to the wall outlet, even

if the unit itself has been turned off.

CAUTION

This equipment is not suitable for use in locations where

children are likely to be present.

WARNING

Excessive sound pressure from earphones and

headphones can cause hearing loss.

In order to use this product safely, avoid prolonged

listening at excessive sound pressure levels.

WARNING: THIS WARNING IS APPLICABLE FOR

USA ONLY.

If used in USA, use the UL LISTED power cord specified

below.

DO NOT USE ANY OTHER POWER CORD.

Plug Cap Parallel blade with ground pin

(NEMA 5-15P Configuration)

Cord Type SJT or SVT, three 16 or 18 AWG wires

Length Minimum 1.5 m (4 ft 11 in), Less than 2.5 m

(8 ft 3 in)

Rating Minimum 10A, 125V

Using this unit at a voltage other than 120V may require

the use of a different line cord or attachment plug, or

both. To reduce the risk of fire or electric shock, refer

servicing to qualified service personnel.

WARNING: THIS WARNING IS APPLICABLE FOR

OTHER COUNTRIES.

1. Use the approved Power Cord (3-core mains lead) /

Appliance Connector / Plug with earthing-contacts

that conforms to the safety regulations of each

country if applicable.

2. Use the Power Cord (3-core mains lead) / Appliance

Connector / Plug conforming to the proper ratings

(Voltage, Ampere).

If you have questions on the use of the above Power Cord

/ Appliance Connector / Plug, please consult a qualified

service personnel.

Operating conditions for temperature and

humidity

Temperature: 0 °C to 35 °C (32 °F to 95 °F)

Humidity: 30% to 85% (no condensation)

For the customers in the U.S.A.

This equipment has been tested and found to comply

with the limits for a Class A digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference when the equipment is operated in a

commercial environment. This equipment generates,

uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction

manual, may cause harmful interference to radio

communications. Operation of this equipment in a

residential area is likely to cause harmful interference in

which case the user will be required to correct the

interference at his own expense.

You are cautioned that any changes or modifications not

expressly approved in this manual could void your

authority to operate this equipment.

All interface cables used to connect peripherals must be

shielded in order to comply with the limits for a digital

device pursuant to Subpart B of part 15 of FCC Rules.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2)

this device must accept any interference received,

Product specificaties

Merk:	Sony
Categorie:	Speaker
Model:	LMD-B240
Kleur van het product:	Zwart
In hoogte verstelbaar:	Nee
Beeldschermdiagonaal:	23.875 "
Resolutie:	1920 x 1080 Pixels
Touchscreen:	Nee
Oorspronkelijke beeldverhouding:	16:9
Kijkhoek, horizontaal:	178 °
Kijkhoek, verticaal:	178 °
Beeldscherm vorm:	Flat
Aantal HDMI-poorten:	1
DVI-poort:	Nee
Bevestigingsmogelijkheid voor kabelslot:	Nee
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	2 W
Stroomverbruik (in standby):	- W
Vermogensverbruik (max):	41 W
Aantal luidsprekers:	2
Beeldscherm, aantal kleuren:	16.78 miljoen kleuren
Maximale refresh snelheid:	- Hz
HD type:	Full HD
3D:	Nee
Audio-ingangen:	Ja
HDMI:	Ja
Display technologie:	LCD
Responstijd:	- ms
VESA-montage:	Nee
Helderheid (typisch):	- cd/m²
Geïntegreerde TV Tuner:	Nee
Ingebouwde camera:	Nee
Diepte ( zonder voet ):	69 mm
Hoogte (zonder voet ):	375.3 mm
Breedte ( zonder voet ):	563 mm
Gewicht (zonder voet):	6400 g
Breedte apparaat (met standaard):	563 mm
Diepte apparaat (met standaard):	165 mm
Hoogte apparaat (met standaard):	397.6 mm
Gewicht (met standaard):	6500 g
AMD FreeSync:	Nee
NVIDIA G-SYNC:	Nee
Temperatuur bij opslag:	-20 - 60 °C
Soort paneel:	TFT
Draaibaar:	Nee
Hoofdtelefoon uit:	Nee
Luchtvochtigheid bij opslag:	0 - 90 procent
Ingebouwde USB-hub:	Nee
Grootte beeld (horizontaal):	527.04 mm
Grootte beeld (verticaal):	296.46 mm
Scharnier:	Nee
Vermogensverbruik (avg):	29 W
Draaien:	Nee
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	0 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	30 - 85 procent
kantel aanpassingen:	Nee