Sonance SS4 Handleiding

Sonance Schakelaar SS4

Lees hieronder de 📖 handleiding in het Nederlandse voor Sonance SS4 (4 pagina's) in de categorie Schakelaar. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/4
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: Read all of these instructions before you operate and
save instructions for later use.
1. Read Instructions - all the safety and operating instructions should be read
before the appliance is operated.
2. Retain Instructions - The safety and operating instructions should be
retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the operating
instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should be followed.
5. Water and Moisture- The appliance should not be used near water - for
example, near a bathtub, washbowl, kitchen sink, laundry tub,in a wet
basement, or near a swimming pool,and the like.
6. Carts and Stands - The appliance should be used only with a cart or stand
that is recommended by the manufacturer. An appliance and cart
combination should be moved with care. Quick stops, excessive force,and
uneven surfaces may cause the appliance and cart combination to overturn.
7. Ventilation - The appliance should be situated so that its location or position
does not interfere with its proper ventilation. For example,the appliance
should not be situated on a bed, sofa, rug, or similar surface that may block
the ventilation openings; or, placed in a built-in installation,such as a
bookcase or cabinet that may impede the flow of air through the ventilation
openings.
8. Heat - The appliance should be situated away from heat sources such as
radiators,heat registers,stoves,or other appliances (including amplifiers)
that produce heat.
9. Cleaning - The appliance should be cleaned only as recommended by
the manufacturer.
10. Object and Liquid Entry - Care should be taken so that objects do not fall
and liquids are not spilled into the enclosure through openings.
11. Damage Requiring Service - The appliance should be serviced by qualified
service personnel when:
A. Objects have fallen or liquid has been spilled into the appliance; or
B. The appliance has been exposed to rain; or
C. The appliance does not appear to operate normally or exhibits a marked
change in performance; or
D. The appliance has been dropped or the enclosure damaged.
12. Servicing - The user should not attempt to service the appliance beyond
that described in the operating instructions. All other servicing should be
referred to qualified service personnel.
I N S T A L L A T I O N I N S T R U C T I O N S
S S 4 V C / S S 6 V C
PN.33-2900 11.02
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lighting flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE. THE APPARATUS SHALL NOT
BE EXPOSED TO DRIPPING OR SPLASHING. NO OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
INTRODUCTION
Thank you for purchasing the Sonance Speaker Selector System.You
have purchased one of the highest performance speaker switching
devices available, carefully designed to give you years of trouble-free
operation. Connection to your system is very simple. Please invest a
few minutes to read the complete instructions,before beginning your
wiring to assure the highest quality sound from your system.
UNPACKING
Save your carton and the styrofoam inserts for future safe transport
in case you move or the unit ever requires shipping for repair.
Before you proceed, find the serial number which is located on the
rear panel of the unit and note it here for future reference.
Serial # ________________________________________
SS4VC/SS6VC BASIC CONCEPT
The SS4VC and SS6VC are designed to connect four and six pairs of
loudspeakers, respectively, to one receiver or amplifier. Each pair of
speakers can be independently turned on/off. The volume control
knobs give you independent volume control in all speaker locations.
These systems provide impedance protection whenever its
protection circuit is manually engaged by the user. When engaged,
the SS4VC and SS6VC adjust the impedance load presented to the
receiver or amplifier.With most amplifiers, when multiple speakers
are engaged, the protection switch should be engaged. With high
amplifier volume, your SS4VC and SS6VC switcher may become
warm. Do not operate your system below the impedance rating of
the receiver, amplifier, or the switcher. Check the owner’s manual of
your receiver or amplifier. Do not exceed the 75Watt RMS rating of
the SS4VC/SS6VC.
USING THE PROTECTION SWITCH
As a general rule, the more speaker pairs you have on, the more the
protection circuitry will be needed. Leavin h rotectio witchg t e P n s
alway ngages e d (“on” positio il rovid h fes pen) w l p e t e sa t o rating
condition for your receive mpli er.r or a fi For most receivers or
amplifiers, the Protection switch should be engaged when more
than one Speaker button is engaged on the SS4VC and SS6VC
switchers. Failure to engage the Protection switch when multiple
pairs of speakers are engaged may cause damage to your receiver or
amplifier.The protection switch is located on the back of the SS4VC
and SS6VC switchers.Slide the red switch towards the left to engage
the 3Ωprotection resistors. Slide the red switch towards the right to
disengage the resistors and turn off the protection circuit.
NOTE: When protection circuitry is engaged, there may be a slight,
but perceivable loss of volume in the speakers that are engaged.This
is simply the trade-off for using resistive protection instead of
individual amp channels for each speaker pair or an impedance
matching device such as the Sonance AF8. Use dedicated amplifiers
if you require more dynamic range.
CUSTOM BUTTON LABELS
Sonance makes multi-room sound distribution even more user-
friendly by including Custom Button Labels (Sonance PN.33-1468).
You can customize your SS4VC or SS6VC with a label for each button
that corresponds with the room or area in which you have a pair of
speakers playing. One sheet of button labels contains 120 pressure-
sensitive labels, each with a 3 to 7-letter abbreviation for nearly
every room or area likely to be encountered in your installation.
Each label fits the dimensions of the indentations under the buttons
on your SS4VC and SS6VC. A legend of the rooms or areas is
included in the package for easy reference.Consult your Authorized
Sonance Dealer for more information.
SS4VC/SS6VC
PLACEMENT
Because the SS4VC and SS6VC both contain resistors which
consume power and dissipate current in the form of heat, the unit
should be placed in a location that won’t heat other source
equipment and where there is good ventilation. If placing it in an
enclosed cabinet or between shelving, make sure there is adequate
space (at least two inches) on all sides and between the top of the
switcher and any shelving, cabinetry, or components placed above
it.A fan may be needed to draw air through the cabinet or shelving
unit if components get too warm. We recommend that you do not
place the unit on top of your receiver or amplifier.
Since your SS4VC and SS6VC will be used as a central switcher for
multiple speaker pairs, it should be easily accessible. When placing
it with other electronics, the SS4VC and SS6VC should be placed in
a location that will accommodate the mass of speaker wires that will
be connected between it, the speakers, and receiver or amplifier.
WIRING
IMPORTANT: Always use high grade speaker wire such as Sonance
MediaLinQ™.We recommend 18 GA wire for runs of 50 feet or less,
16 GA for runs of 50-100 feet, or 14 GA for runs over 100 feet.
A. Source Connection:
1.Connect the left speaker output of the receiver or amplifier to the
left INPUT connector of the SS4VC/SS6VC (see diagram above).
Make sure that the positive (+) terminal of the receiver or amplifier
connects to the positive (+) terminal of the input connector of the
SS4VC/SS6VC. The negative (-) connection should be connected to
the negative (-) terminal of the input connector of the
SS4VC/SS6VC.
2. Repeat step 1 for the right side, connecting the right speaker
output of the receiver or amplifier to the right INPUT connector of
the SS4VC/SS6VC (see diagram above).
B. Speaker Connection:
1.With appropriate speaker wire, connect the first pair of speakers
to the left SPEAKER 1 connections on the back of the
SS4VC/SS6VC. Make sure the speaker positive (+) is connected to
the SS4VC/SS6VC positive (+), the speaker negative (-) to the
SS4VC/SS6VC negative (-).
2.Repeat step 1 for the remaining speaker pairs.
FRONT PANEL OPERATION
Operation of the SPEAKER Buttons:
To engage any pair of speakers, push in the button which
corresponds to the pair of speakers you want to turn on. The “in”
position means the speakers are on.Any combination of the speaker
pairs may be played at once.To disengage any pair of speakers,push
in the button which corresponds to the pair of speakers you want to
turn off.The “out” position means the speakers are off.
Note: A slight decrease in volume may occur when additional
speakers are engaged.
Note: With the SS6VC (not shown), you can add up to 2 more rooms.

Product specificaties

Merk: Sonance
Categorie: Schakelaar
Model: SS4

Heb je hulp nodig?

Als je hulp nodig hebt met Sonance SS4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Schakelaar Sonance

Sonance

Sonance SS4 Handleiding

8 Januari 2025

Handleiding Schakelaar

Nieuwste handleidingen voor Schakelaar

Advantech

Advantech EKI-2711PSI Handleiding

7 Januari 2025
Homematic IP

Homematic IP HMIP-PSM-CH Handleiding

7 Januari 2025
Smart-AVI

Smart-AVI SM-DVN-84X Handleiding

6 Januari 2025
Smart-AVI

Smart-AVI SM-MST-2D Handleiding

6 Januari 2025
Suevia

Suevia DigiPro Handleiding

3 Januari 2025
Digitus

Digitus DN-80112-2 Handleiding

27 December 2024
Adder

Adder Link INFINITY Dual 2112T Handleiding

26 December 2024
Adder

Adder Link INFINITY 1002 Handleiding

26 December 2024
D-Link

D-Link DIS-100G-S5W Handleiding

24 December 2024
D-Link

D-Link DGS-3630-28TC Handleiding

23 December 2024