Snap Circuits Bric: Structures SC-BRIC1 Handleiding

Snap Circuits Modelbouw Bric: Structures SC-BRIC1

Lees hieronder de 📖 handleiding in het Nederlandse voor Snap Circuits Bric: Structures SC-BRIC1 (60 pagina's) in de categorie Modelbouw. Deze handleiding was nuttig voor 63 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/60

photocopying, or otherwise without written permission from the publisher. U.S. Patents 7,144,255; 3,37,27 77; Patents Pending

A G E S 8 t o

Three (3) “AA”

batteries required

INSTRU CTION MANU AL

title:

753235

rojects

-26

Most circuit problems are due to incorrect assembly, always double-

check that your circuit exactly matches the drawing for it.

2. Be sure that parts with positive/negative markings are positioned

as per the drawing.

3. Be sure that all connections are securely snapped.

4. Try replacing the batteries.

Elenco® is not responsible for parts damaged due to

incorrect wiring.

Basic Troubleshooting

Note: If you suspect you have damaged parts, you can follow the

Advanced Troubleshooting procedure on page 7 to determine which

ones need replacing.

Basic Troubleshooting 1

Parts List 2

How to Use Snap Circuits® 3

About Your Snap Circuits® Parts 4

Introduction to Electricity 5

DOs and DON’Ts of Building Circuits 6

Advanced Troubleshooting 7

Project Listings 7

Schematics and Blue Prints 8

Projects 9-54

Other Snap Circuits® Products 55

WARNING: SHOCK HAZARD - Never connect Snap

Circuits® to the electrical outlets in your home in any

way!

Table of Contents

WARNING: Always check your wiring

before turning on a circuit. Never leave

a circuit unattended while the batteries

are installed. Never connect additional

batteries or any other power sources

to your circuits. Discard any cracked or

broken parts.

Adult Supervision:

Because children’s abilities vary so

much, even with age groups, adults

should exercise discretion as to which

experiments are suitable and safe (the

instructions should enable supervising

adults to establish the experiment’s

suitability for the child). Make sure

your child reads and follows all of

the relevant instructions and safety

procedures, and keeps them at hand

for reference.

This product is intended for use by

adults and children who have attained

sucient maturity to read and follow

directions and warnings.

Never modify your parts, as doing so

may disable important safety features

in them, and could put your child at risk

of injury.

• Use only 1.5V AA type, alkaline

batteries (not included).

•

• Insert batteries with correct

polarity.

•

• Non-rechargeable batteries

should not be recharged.

Rechargeable batteries should

only be charged under adult

supervision, and should not be

recharged while in the product.

•

• Do not connect batteries or

battery holders in parallel.

• Do not mix old and new batteries.

•

• Do not mix alkaline, standard

(carbon-zinc), or rechargeable

(nickel-cadmium) batteries.

•

• Remove batteries when they are

used up.

•

• Do not short circuit the battery

terminals.

•

• Never throw batteries in a re or

attempt to open its outer casing.

•

• Batteries are harmful if swallowed,

so keep away from small children.

Batteries:

WARNING: CHOKING HAZARD - Small parts. Not for

children under 3 years.

Conforms to all applicable U.S. government requirements and CAN

ICES-3 (B)/NMB-3 (B).

Qty. ID Name Symbol Part #

r 4 Brick 1x1, 3-Sided 6BR1X1S3

r 33 Brick 1x2 6BR1X2G

r 10 Brick 1x3 6BR1X3G

r 11 Brick 1x4 6BR1X4G

r 11 Brick 1x6 6BR1X6G

r 4 Brick 1x10 6BR1X10G

r 7 Brick 1x12 6BR1X12G

r 18 Brick 2x2 6BR2X2G

r 6 Brick 2x4 6BR2X4G

r 8 Brick 2x6 6BR2X6G

r 25 Bric2snap Adapter, 1x1 6BRA1X1

r 25 Bric2snap Adapter, 1x2 6BRA1X2

r 25 Bric2snap Adapter, 2x2 6BRA2X2

r 1 Baseplate 10” x 5” 6BRBP1

r 6 Plate 2x12 6BRP2X12DG

r 20 Plate 2x2 6BRP2X2G

Qty. ID Name Symbol Part #

r 1 Brick Remover Tool 6BRTOOL

r 3 3-Snap Wire 6SC03

r 2 3D Snap 6SC3DSNAP

r 1 Battery Holder - uses three (3)

1.5V type “AA” (not Included) 6SCB3

r 1 Color LED 6SCD8

r 1 Blue LED 6SCD9

r 1 Blink Red LED 6SCD11

r 1 Color2 LED 6SCD12

r 1 Fiber Optic Tree 6SCFT

r 1 Mounting Base 6SCFMB

r 2 Jumper Wire (Orange) 6SCJ3A

r 3 Jumper Wire (Blue) 6SCJ4

r 1 4.5V Lamp 6SCL4

r 1 Lined Lens LED Attachment 6SCLLENS

r 1 Slide Switch 6SCS1

r 1 Melody IC 6SCU32

Important: DO NOT RETURN TO RETAILER If any parts are missing or damaged, . Call toll-free (800) 533-2441 or e-mail us at: help@elenco.com.

Customer Service: 150 Carpenter Ave., Wheeling, IL 60090 U.S.A. ● You may order additional / replacement parts at www.elenco.com/replacement-parts

Parts List (Colors and styles may vary) Symbols and Numbers

D11

U32

D12

Product specificaties

Merk:	Snap Circuits
Categorie:	Modelbouw
Model:	Bric: Structures SC-BRIC1
Kleur van het product:	Black, Grey
Gebruikershandleiding:	Ja
Aanbevolen leeftijd (min):	8 jaar
Type verpakking:	Doos
Type stroombron:	Batterij/Accu
Ondersteund aantal accu's/batterijen:	3
Voorgesteld geslacht:	Jongen/meisje
Batterijen vereist:	Ja
Aantal stuks:	235 stuk(s)
Geluidseffecten ondersteund:	Ja
Figuur inclusief:	Nee
Batterijen inbegrepen:	Nee
Type product:	Bouwpakket
Type batterij:	AA
Lichteffecten:	Ja
EU TSD-waarschuwing:	Niet geschikt voor kinderen onder de 36 maanden
Awards:	Stuurpen
Waarschuwing voor verstikkingsgevaar:	Kleine onderdelen