Smeg SBC4604WNR Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Smeg SBC4604WNR (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
12 - PRECAUTIONS 91477A874/A
PRECAUTIONS 12
General safety instructions 12
Declaration of conformity 13
Declaration art. 10.10 Directive 2014/53/EU 13
This user manual 13
How to read the user manual 13
USE 13
SmegConnect 13
Connectivity requirements 13
Installation of the App 13
Creation of the account 13
Product registration 14
Connection to the device 14
Remote connection 15
Change Access Point credentials 16
SmegConnect Menu 17
Information on the connection 17
Deletion of the registration 18
Software updates 18
What to do if... 19
We advise you to read this manual carefully, which contains all the instructions for maintaining the
appliance’s aesthetic and functional qualities. For further information on the product: www.smeg.com
Apple, App Store and iOS are trademarks of Apple Inc.
Google Play Store and Android are trademarks of Google Inc.
Wi-Fi is a trademark of Wi-Fi Alliance.
PRECAUTIONS
General safety instructions
The use of the App requires the
availability of a WLAN (Wi-Fi)
network with dedicated Internet
router, for the connection
between appliance and mobile
device.
In case of poor signal for the
use of the appliance, envisage
to install a Wi-Fi repeater
nearby.
Outside the coverage range of
the Wi-Fi network, the use of
the App involves the availability
of a data link for the mobile
device. CAUTION: additional
costs might arise depending on
the contract with the mobile
phone operator.
The appliance can operate off-
line as a "non-connected"
household appliance, but it
cannot be controlled through
the App when the Wi-Fi
connection or the data link are
deactivated.
In compliance with the
provisions regarding
electromagnetic compatibility,
the appliance belongs to group
2 and class B (EN 55011).
This appliance complies with
the current standards and
directives regarding safety and
electromagnetic compatibility.
It is however recommended for
pacemaker wearers to
maintain a minimum distance of
20-30 cm between the
appliance when it is operating
and the pacemaker. Consult
the pacemaker manufacturer
for more information.
In some models only, for safety
USE - 1391477A874/A
e
reasons and in compliance with
current legislation, some
functions cannot be activated
remotely.
Declaration of conformity
The manufacturer, SMEG, declares that the
types of radio equipment:
SBC4606WNR
comply with the directive 2014/53/EU.
Technology: Wi-Fi IEEE 802.11 b/g/n.
Frequency: 2400-2497 MHz.
Maximum output power: +18.5 dBm.
The equipment operates in the ISM band at
2.4 GHz.
The maximum stand-by power consumption
of the appliance connected to the mains is
2.0 W.
The complete text of the EU declaration of
conformity is available at the following internet
address:
www.smeg.com/smegconnect/direttiva_red
Declaration art. 10.10
Directive 2014/53/EU
This radio equipment is NOT subject to
restrictions on putting into service or to
requirements concerning authorisation for use in
any of the EU Member States.
This user manual
This user manual is an integral part of the
appliance and must therefore be kept in its
entirety and within the user's reach for the
whole working life of the appliance.
Read this user manual carefully before using
the appliance.
The explanations in this manual include
images, which describe all that regularly
appears on the display. However, it should
be kept in mind that the appliance may be
equipped with an updated version of the
system, and as such, all that appears on the
display may differ from those in the manual.
How to read the user manual
This user manual uses the following reading
conventions:
USE
SmegConnect
The appliance is equipped with SmegConnect
technology that allows the user to control the
appliance operation via an App on his/her
smartphone or tablet.
For further information, refer to the supplied
brochure and/or visit the site
www.smeg.com
Connectivity requirements
Smartphone or PC tablet with IOS or
Android operating system. The minimum
versions of the operating systems are
available at the following link:
www.smeg.com/smegconnect/
Wi-Fi network (2.4 GHz band, WPA2
protected) active and available in the place
where the appliance is installed.
Internet connection.
Name and password of the home Wi-Fi.
Installation of the App
Download the App SmegConnect on your
mobile smartphone or tablet from App Store
(Apple devices) or Google Play Store (Android
devices) and install it.
Creation of the account
1. Launch the SmegConnect App.
2. Enter the information required in order to
register.
Warning/Caution
Information/Advice
The fields marked with an asterisk “*”
are mandatory.
14 - USE 91477A874/A
3. A confirmation e-mail is sent to the address
that has been entered when the registration
procedure has been completed.
Product registration
The registration step is formed by alternated
operations to be made in the App and on
the display of the appliance . Make sure
you are close to the appliance.
Connection to the device
1. Tap Log in.
2. In the following screen (Home page), tap
Add product.
3. Select the type of product you wish to
connect (in this case "oven").
4. Touch the Settings button (at the
bottom right) on the main menu display on
the device.
(on some models only) Select Connection
.
5. Select SmegConnect.
6. Touch the Registration button.
7. Select the registration procedure for the
required product (Manual or Automatic).
Manual mode
1. Select Manual mode.
2. Go to the Wi-Fi settings on the mobile
device and select the "smegconnect"
network.
3. Enter the password " " and wait smeg0001
for the connection to be established.
4. Go back to the SmegConnect App and tap
Next.
5. Press the Confirm button within one
minute.
6. Enter the Access Point data:
Name of the home Wi-Fi network.
Wi-Fi password.
7. Tap Next and wait for the confirmation
page.
8. Wait for the welcome page.
The "REGISTRATION COMPLETED!" displays
on the device.
The Connectivity icon (in the information
area at the top right) remains on solid. The
product registration procedure has been
completed.
Now the display of the appliance shows the
Settings menu to activate the Remote
control (on some models only: within the
If the "REGISTRATION FAILED"
message is displayed during the
registration process, it means that some
steps of the procedure were not
performed properly or that the
procedure was stopped.
The registration procedure can be
interrupted by pressing the RETURN
button (available on some screens
only).
There is no need to activate the
"Connectivity" setting on the appliance
beforehand. The procedure starts
automatically.
The device supports network names
(SSID) up to 32 digits (including
spaces) and WPA2 security settings
(not WEP or WPA).
During this step, the mobile device
automatically reconnects to the initial
Wi-Fi network or data network. No user
operation is required.


Product specificaties

Merk: Smeg
Categorie: Niet gecategoriseerd
Model: SBC4604WNR

Heb je hulp nodig?

Als je hulp nodig hebt met Smeg SBC4604WNR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Smeg

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd