Smeg PC68-1 Handleiding

Smeg Niet gecategoriseerd PC68-1

Lees hieronder de 📖 handleiding in het Nederlandse voor Smeg PC68-1 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

PC60 - PC68 - PC681

Self-cleaning panels

PC60

PC68 - PC681

1 Left self-cleaning panel

2 Self-cleaning deflector

3 Right self-cleaning panel

The self-cleaning panels are coated in a

special enamel which aids progressive

elimination of grease splattering and

odours caused by cooking food.

Precautions

Avoid using anti-adhesive films (silicone)

and all maintenance products, particularly

harsh cleaning products.

Do not knock the self-cleaning coating or

use metal brushes or blunt objects to clean it.

Practical advice

The self-cleaning enamel will always

remain clean as long as stains are not

produced at a greater rate than they are

eliminated.

If production of stains increases, the

cleaning action will become insufficient and

the self-cleaning coating will become

ineffective.

After cooking food which leaves a large

amount of dirt and stains on the oven (e.g.

roast duck), it is necessary to heat the oven

up to maximum temperature while empty.

Cooking foods which do not splatter can

also be an opportunity to perform this

regeneration.

Do not cook food which could further stain

the oven before the dirt from the previous

cooking has been eliminated.

If the appliance has the “Vapor

Clean” function, do not point the

spray nozzle towards the

deflector.

PC60 - PC68 - PC681

Installation of the self-cleaning panels

1. Remove all accessories from inside the

oven (trays and drip trays).

2. Remove the frames: pull the frame

towards the inside of the oven to unhook

it from its groove A, then slide it out of the

seats at the back .B

3. Remove the deflector: unscrew the two

side screws holding the deflector to the

rear wall of the oven.

4. Replace the deflector with the new self-

cleaning deflector ( ): fasten it to the 2

rear wall of the oven using the screws

removed from the previous deflector.

PC60 - PC68 - PC681

5. Place the left-hand self-cleaning panel

( ) on the corresponding oven wall.1

6. Hold the self-cleaning panel in position

on the wall and insert the frame first into

the seats at the back , then hook it into B

its groove .A

7. Repeat the operation with the right-hand

self-cleaning panel ( ).3

Regeneration of self-cleaning panels

(catalytic cycle)

The regeneration cycle of the self-cleaning

panels is a cleaning method through

heating suitable for removing small grease

residues, not sugar-based ones.

1. Clean the base and the upper guard first

with a microfibre cloth soaked in water

and neutral washing up liquid. Rinse

thoroughly.

2. Set a regeneration cycle by selecting a

fan assisted function at the maximum

temperature for one hour.

3. If the panels are particularly dirty after the

regeneration cycle, remove them and

wash them with neutral washing up

liquid. Rinse and dry them.

Put the panels back in the oven and set a

fan assisted function at a temperature of

180°C for one hour, in order to ensure that

they are thoroughly dry.

We recommend carrying out the

self-cleaning panel regeneration

cycle every 15 days.

Product specificaties

Merk:	Smeg
Categorie:	Niet gecategoriseerd
Model:	PC68-1
Kleur van het product:	Zwart
Soort:	Katalytische panelenset
Materiaal:	Metaal
Aantal per verpakking:	3 stuk(s)
Merkcompatibiliteit:	Smeg