Smeg KITGD50 Handleiding

Smeg Niet gecategoriseerd KITGD50

Lees hieronder de 📖 handleiding in het Nederlandse voor Smeg KITGD50 (7 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/7

EINES ZERMALMGERATES

ANWEISUNGEN ZUR INSTALLATION UNDNUTZUNG

NOTICE D'UTILISATION ET DE MONTAGE

INSTRUCCIONES PARA INSTALACION Y USO DEL TRITURATOR

FOOD VASTE DISPOSER INSTALLATION AND USE

Deutch - Seiten 27-32

Français - Pages 21-26

Espaňol - Páginas 15-20

English - Paes 9-14

Italiano - Pag. 2 - 8

Conforme alla Direttiva 2002/96/CE

ISTRUZIONI PER L'INSTALLAZIONE E L'USO

Pag. 9

FOOD WASTE DISPOSER INSTALLATION INSTRUCTIONS

For specialized installers use only.

The following instructions are for qualified installers able to do all the operations in the most correct

way according to the electrical and plumbing rules.

Assembly parts

Conveyor Sink flange

Flange gasket

Flange washer Metal ring Mounting ring

Hinged Clamp Drain pipe Tube flange, tube rubber

gasket and

screws

1/bis

Extra sink

stopper

Pag. 10

used to tighten the mounting ring (3-5-6) assem

(6) and take the flange washer away. (4)

Loosen the hinged clamp (7) and levering with your h

Sink mount flange installation

Remove the sink waste trap (fig. 1)with a screwdriver and

scrape the left over plumbers putty used to seal the sink

Garbage disposer installation ands

remove the garbage disposer flange, unscrew the mount ring

Fig. 1

A. Put the sink flange (2)in the discharge sinkhole, taking care that the black flange gasket (3)

sets perfectly well. If it’s not a stainless steel sink but a synthetic or a ceramic one, you better

apply a thin coat of sanitary stopper instead of flange gasket.

B Under the sink: . you need to firmly seat and attach the mounting ring which has three screws

bly so it will apply firmly to the sink bottom

C. Join the garbage disposer to the flange and put the hinged clump in position (D) To facilitate

insertion between the garbage disposer and the flange put some cooking oil on the border of the

guard-splash.

B. C.

Plumbing Connection

Attach the disposer discharge tube with the tube flange using the given screw.

Connect the garbage disposer discharge tube (see fig.E) and tighten it to the drain trap

(ex. F.1-F.2)

To avoid problems, before connecting the plumbs, control the tubes cleaning them if

needed.

F.1

F.2

Product specificaties

Merk:	Smeg
Categorie:	Niet gecategoriseerd
Model:	KITGD50
Kleur van het product:	Black, Grey, Stainless steel
Soort:	Afvalverwerkingssysteem voor gootstenen
Merkcompatibiliteit:	Smeg
Soort apparaat:	Wastafels