Skytec SPL 700BT Handleiding

Skytec Receiver SPL 700BT

Lees hieronder de 📖 handleiding in het Nederlandse voor Skytec SPL 700BT (16 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

STEREO POWER AMPLIFIER WITH EQ

AND BT-RECEIVER

SPL5 00EQ BT

SPL700EQ BT

SPL1000EQ BT

Instruction Manual

Gebruiksaanwijzing

Mode d’Emploi

Gebrauchsanleitung

Manual de instrucciones

SPL EQ BT– SERIES - 2 -

Basis aansluiting /Basic connections / Connexions de base /

Grundanschlüsse/Conexiones básicas:

SPL EQ BT– SERIES - 3 -

Congratulations to the purchase of our SPL Ampliﬁer.

Read the instructions thoroughly prior to using the unit.

SAFETY INSTRUCTIONS

 Hearing damage:

Loudspeakers are easily generating high sound

pressure levels (SPL) suﬃcient to cause permanent

hearing damage to performers, production crew and

audience members. Care should be taken to avoid

prolonged exposure to SPL in excess of 85 dB.

 Make sure that the ampliﬁer is switched oﬀ when the

speaker box is connected or disconnected.

 Do not overload the ampliﬁer or speakers to avoid

damage to the components.

 Do not plug or unplug the unit with wet hands.

 If the plug and/or the mains lead are damaged, they

need to be replaced by a qualiﬁed technicia n.

 Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

 During a thunderstorm or if the unit will not be used for

a longer period of time, unplug it from the mains. The

rule is: Unplug it from the mains when not in use.

 If the unit has not been used for a longer period of

time, condensation may occur. Let the unit reach

room temperature before you switch it on. Never use

the unit in humid rooms or outdoors.

 During operation, the housing becomes very hot. Do

not touch it during operation and immediately after.

 Do not use cleaning sprays to clean the switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice

from a specialist.

 Do not force the controls.

 Do not place an open ﬁre (candle, etc.) on top or next

to the box - FIRE HAZARD

 Make sure that the ampliﬁer is placed on a stable,

solid surface.

 Do not place liquids on the ampliﬁer and protect it

against humidity. Humidity can shorten the life time

considerably.

 If the unit is damaged to an extent that internal

parts are visible, DO NOT connect the unit and DO

NOT switch it on. Contact your dealer.

 Never try to repair the unit yourself. It does not

contain any user serviceable parts. All repairs must

be carried out by a qualiﬁed technician.

 Set the ampliﬁer to the lowest volume prior to

switching it on.

 Keep the unit out of the reach of children.

 Switch the unit oﬀ prior to unplugging it from the

mains and/or other equipment. Unplug all leads and

cables prior to moving the unit.

 Make sure that the mains lead cannot be damaged

when people walk on it. Check the mains lead

before every use for damages and faults!

Protect your environment. Recycle packing

material whenever possible.

Do not throw a faulty unit into normal household

waste but bring it to a special collection

point. A large part of it can be recycled.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit.

This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by

inappropriate use or disrespect of the warnings contained in this manual. SkyTronic cannot be held responsible for

personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all

damages in whatever form.

CONNECTIONS

First of all, check the speciﬁcations of the ampliﬁer if it is suitable for your speaker boxes. Pay particular attention

to the power rating and impedance. Check if the ampliﬁer is switched oﬀ. If yes, you can switch on the speakers.

PLEASE NOTE! Watch the polarity (+/-). Wires of the same colour must be connected to the same sign of every

side i.e. the + of the ampliﬁer must be connected to the + of the speaker box. If the connections are inverted, the

sound quality will diminish. Only use high quality speaker cables that are suitable for the power and distance

between the ampliﬁer and the speaker.

LAYOUT:

Front Panel

1. Power switch

2. or Power on/oﬀ indicat

3. Channel A & B volume

control

4. Signal LED Channel A & B

5. Clip indicator

6. 3-Bands EQ

7. BT / Input selector

8. MP3 Input

Product specificaties

Merk:	Skytec
Categorie:	Receiver
Model:	SPL 700BT
Kleur van het product:	Wit
Gewicht:	4000 g
Breedte:	482 mm
Diepte:	270 mm
Hoogte:	88 mm
LED-indicatoren:	Ja
Aan/uitschakelaar:	Ja
Connectiviteitstechnologie:	Bedraad
Audio-ingang (L, R):	2
Gemiddeld vermogen:	700 W
Volumeregeling:	Draaiknop
Ingang stroom:	Ja
Bedoeld voor:	Thuis
Audio-uitgangskanalen:	2.0 kanalen
Frequentiebereik:	20 - 20000 Hz
Signaal/ruis-verhouding:	98 dB
Crosstalk (1kHz):	82 dB
Totale harmonische vervorming (THD):	0.5 procent
Regeling van bass-niveau:	Ja
Rackcapaciteit:	2U
AC-ingangsspanning:	220-240 V
AC-ingangsfrequentie:	50 Hz
Input sensitiviteit:	775 mV
Treble adjustment:	Ja
Speakers connectiviteit type:	Poolklem
RMS vermogen uitvoer per kanaal (4 Ohm):	350 W
CD audio in (L, R):	Ja