Simrad WiFi-1 Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor Simrad WiFi-1 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
*988-10401-004*
www.bandg.com | www.simrad-yachting.com | www.lowrance.com
Installing
+_
4
4
6
5
8
9
2
3
1
7
Key Description
1Multi-function display, SonarHubā„¢,
StructureScanĀ® or other WIFI-1
2WIFI-1
3
Optional second WIFI-1 to use when
connecting your phone/tablet for
viewing/controlling the display unit
and the primary WIFI-1 is used for
accessing the internet. For more
information, refer to ā€œWIFI-1 modesā€.
4Ethernet cable
5Power cable
6Remote power on: WIFI-1 will turn on
when power is applied
7Fuse or breaker
812 V DC
9
Remote power on: WIFI-1 will turn
on when the MFD is turned on (MFD
needs to be set to power on master)
Wiring
English
WIFI-1
Installation Guide
Layout
Key Description
1Antenna
2Ethernet ports
3Power connector
4Ethernet LEDs. Green: port is active
5Power LED. Red: power on
2 2
45
31
Dimensional drawing
52 mm (2.05ā€)
156 mm (6.14ā€)
25 mm
(1.0ā€)
187 mm
(7.36ā€)
171 mm (6.76ā€)
154 mm (6.06ā€)
WIFI-1 modes
The WIFI-1 can be operated in one of two modes:
Connecting your phone/tablet mode
Use the wireless settings
dialog to connect mobile
devices to the MFD via the
WIFI-1. Use the NavicoĀ®/brand
mobile app on the mobile
device to access the vesselā€™s
navigation information. For
more information about the
NavicoĀ®/brand mobile app,
refer to the MFD documentation.
For security purposes, we recommend you change the administrator
password. When you connect the WIFI-1 to your display network,
follow the prompts on your display unit to change the administrator
password. Remember to note the new password.
Note: After changing the password, the WIFI-1 will restart and will be
oļ¬„ine for about 30 seconds.
Set administrator password
Accessing the Internet mode
In the MFD, use the Connect to the Internet option in the
wireless settings dialog to access the internet via the WIFI-1.
Note: While accessing the Internet, mobile devices can no longer
access the MFD navigation information unless there is a second
WIFI-1 connected to the system, or the unit has a built-in WIFI
module.
References
For a list of supported features, or to download the latest software
for your MFD, please visit:
www.bandg.com, www.simrad-yachting.com, www.lowrance.com
WIFI-1 features
Marinised construction IPX5
Wireless standards 802.11 b/g
Ethernet network ports 2
Automatic conļ¬guration Plug-n-play
Power supply 12 V DC, 200 mA
Supported hotspot security WPA-PSK, WPA2, WPE 64/128 bit
encryption, TKIP encryption
Speciī˜Ÿcations
Compliance statements
This device complies with CE under RED Directive 2014/53/EU.
The relevant Declaration of conformity is available in the productā€™s
section at the following website: www.bandg.com,
www.simrad-yachting.com, or www.lowrance.com
WIFI-1 complies with UKCA under The Radio Equipment
Regulations 2017. The relevant Declaration of conformity is available
in the productā€™s section at the following website: www.bandg.com,
www.simrad-yachting.com, or www.lowrance.com
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Warning: NavicoĀ® is not responsible for any changes
or modiļ¬cations not expressly approved by the party
responsible for compliance. such modiļ¬cations could
void the userā€™s authority to operate the equipment.
Note: This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that the
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment oļ¬€
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
ā€¢ Reorient or relocate the receiving antenna.
ā€¢ Increase the separation between the equipment and receiver.
ā€¢ Connect the equipment into an outlet on a circuit diļ¬€erent
from that of the receiver is connected.
ā€¢ Consult the dealer or an experienced technician for help.
This device complies with Innovation, Science and Economic
Development Canadaā€™s licence-exempt RSSs. Operation is subject
to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference
that may cause undesired operation of the device.
La traduction franƧaise de ce document est disponible sur le site
Web du produit.


Product specificaties

Merk: Simrad
Categorie: Niet gecategoriseerd
Model: WiFi-1

Heb je hulp nodig?

Als je hulp nodig hebt met Simrad WiFi-1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Simrad

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo

Festo VPPI Handleiding

21 November 2024
Festo

Festo SFAB Handleiding

21 November 2024
Festo

Festo SFAH Handleiding

21 November 2024
Festo

Festo DRRD-12 Handleiding

21 November 2024
Festo

Festo SDE3 Handleiding

21 November 2024
Festo

Festo SFTE Handleiding

21 November 2024
Festo

Festo CRVZS-5 Handleiding

21 November 2024