Simplecom NW812 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Simplecom NW812 (2 pagina's) in de categorie Netwerkkaart/adapter. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Features
• High performance WiFi 6 USB adapter for PC and Laptop
• AX1800 supports up to 574Mbps at 2.4GHz and 1201Mbps at 5GHz
• Supports MU-MIMO for ecient connection in high density environments
• Supports WPA3 to provide enhanced network security against attacks
• High gain antenna ensures strong and stable WiFi signal
• Excellent portability with foldable antenna
• Beamforming improves WiFi signal strength and range
• Backwards compatible with previous standard WiFi routers
• Ideal for HD streaming, online gaming and downloading
• Easy and automatic installation for Windows PC
• Support Windows 10 and above operating systems
Driver Installation (Windows)
Specications
• Model: NW812
• Interface: USB 3.2 Gen 1 (USB 3.0)
• WiFi Protocol: IEEE 802.11a/b/g, WiFi 4 (802.11n), WiFi 5 (802.11ac), WiFi
6 (802.11ax)
• WiFi Rate: up to 574Mbps (2.4GHz 802.11ax), 1201Mbps (5GHz
802.11ax), 867Mbps (5GHz 802.11ac)
• Antenna Type: foldable high gain antenna
• Wireless Security: WPA-PSK, WPA2-PSK, WPA, WPA2, WPA3
• Wireless Frequency: Dual band 2.4GHz & 5GHz
• Operating Temperature: 0 – 40°C
• Operating Humidity: 10% - 90% non-condensing
• System Requirements: Windows 10 and above
Quick Installation Guide
1. While plug this adapter to your computer rst time, the installation
program will be launched automatically from Virtual CD Drive if
AutoRun is enabled on your PC. Then click to nish driver "Install"
installation.
Note: Only Windows 10 and 11 are supported, you can also
check latest driver from our website www.simplecom.com.au,
search the model number , then open product page, NW812
driver les are located under DOWNLOAD tab on product page.
NW812
AX1800 Dual Band WiFi 6 USB Adapter
NW812
2. If AutoRun is disabled on your PC, or blocked by security software,
you can manually open the Virtual CD Drive to install driver. You'll see
there is a Virtual CD Drive under on Windows 10 or "Realtek" "This PC"
11, which contains the driver software for the adapter. You can launch
installation by double clicking "WiAutoInstallSetup.exe".
3. Virtual CD Drive will disappear after the driver is installed.
Note: This WiFi adapter supports Windows only, macOS and other
systems are not supported
3. Check the "Connect automatically" option and click the "Connect"
4. Enter the network security key (password), then click "Next"
1. Click the network icon in system tray
2. Select your Wi-Fi SSID you want to connect
Windows Device Manager
1 Year limited Warranty. Our goods come with guarantees that
cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not
amount to a major failure.
For our assistance with regards to warranty please email to
support@simplecom.com.au or create a support ticket at
http://www.simplecom.com.au
Warranty
© Simplecom Australia All Rights Reserved. Simplecom is a registered
trademark of Simplecom Australia Pty Ltd. All other trademarks are
property of their respective owner. Specications and external appearance
are subject to change without notice. Warranty and technical support
covering this product are only valid in the country or region of purchase.
Windows 10 Windows 11
1. To open Device Manager on Windows 10 or 11, in the search box on the
taskbar, type , then select from the menu."Device Manager"
2. Expand the section. On a successful install, you "Network adapters"
should see the following device in the list
3. Please note driver only can be installed from auto installation program,
the USB Wi-Fi adapter will not be recognized or listed with exclamation
and question marks under Device Manager before installing the driver.
Once you complete the steps, the PC will connect to the network
using the wireless connection.
Connect to WiFi


Product specificaties

Merk: Simplecom
Categorie: Netwerkkaart/adapter
Model: NW812
Gewicht: 22 g
Breedte: 85 mm
Diepte: 32 mm
Hoogte: 14 mm
Gebruikershandleiding: Ja
Wi-Fi-standaarden: 802.11a, 802.11b, 802.11g, Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax)
Connectiviteitstechnologie: Draadloos
USB-versie: 3.2 Gen 1 (3.1 Gen 1)
Interface: WLAN
Wifi-band: Dual-band (2.4 GHz / 5 GHz)
Wifi-standaard: Wi-Fi 6 (802.11ax)
Netwerkstandaard: IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ondersteunde beveiligingsalgoritmen: WPA, WPA-PSK, WPA2, WPA3
Intern: Nee
Ondersteunde WLAN data-overdrachtsnelheden: 574,867,1200 Mbit/s
Hostinterface: USB
Maximale overdrachtssnelheid van gegevens: 1800 Mbit/s
Antenne: Ja
Component voor: PC/notebook
Wifi: Ja
Bedrijfstemperatuur (T-T): 0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V): 10 - 90 procent
Antenne-ontwerp: Extern
Ondersteunings-cd: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met Simplecom NW812 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Netwerkkaart/adapter Simplecom

Handleiding Netwerkkaart/adapter

Nieuwste handleidingen voor Netwerkkaart/adapter

Asus

Asus EBP15 Handleiding

17 December 2024
Aukey

Aukey PA-Y18 Handleiding

14 December 2024
Aukey

Aukey PA-U32 Handleiding

14 December 2024
ZyXEL

ZyXEL NWA210BE Handleiding

11 December 2024
ZyXEL

ZyXEL NWA110BE Handleiding

11 December 2024
TP Link

TP Link FC1420 Handleiding

10 December 2024
AViPAS

AViPAS AV-POE4 Handleiding

10 December 2024