Silva Exceed 4XT Handleiding

Silva Lamp Exceed 4XT

Lees hieronder de 📖 handleiding in het Nederlandse voor Silva Exceed 4XT (13 pagina's) in de categorie Lamp. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13
CHOOSE YOUR LANGUAGE:
FULL VERSION MANUAL
EXCEED 4XT Art. no 37984
y g y p y y p p
damage or cause any type of weakness to the plastic in your helmet.
To mount the helmet bracket, remove the protective lm covering the adhesive tape. Make
sure the surface of the helmet is clean and dry. Press the bracket onto its correct position.
If you do not want to use the adhesive on your helmet the attachment is prepared for mount-
ing with 2 or more straps on the sides. (Not included)
Attach the headlamp in the helmet bracket by sliding the headlamp bracket into the snap-in
socket. To remove, slide the headlamp up and out of the bracket.
Attach the cable by using the back cable guide or integrated helmet strap.
Depending on helmet type, it might be preferable to use the Helmet mode – Flow light deac-
tivated, when the headlamp is used on a helmet.
The headband is designed to fit on a helmet – thus giving you the flexibility to use either
the included helmet bracket or to just snap the headlamp onto your helmet and go.y type of
weakness to the plastic in your helmet.
tery energy remains. This is done by flashing both LEDs for 1 second.
RESERVE MODE
During operation, the lamp will go into reserve mode when there is 10% power left of the bat-
tery. All LEDs will flash before the lamp goes into this mode.
Reserve mode can be overridden by pressing the button.
Warning: If you have pressed the button when headlamp is in reserve mode no more low bat-
tery warnings will appear before the headlamp turns OFF.
BATTERY STATUS INDICATION
When battery is connected and the headlamp is switched on - the current battery status will
automatically be visible for 30 seconds. To check battery status during use, the headlamp
has to be switched OFF and then back ON again.
• 5 green LEDs = Fully charged
• 4 green LEDs = 80% of the battery remains
• 3 green LEDs = 60% of the battery remains
• 2 green LEDs = 40% of the battery remains
• 1 red LED = 20% of the battery remains
To get as much power as possible out from your battery, keep it away from low temperatures
during use.
Visit: www.silva/environment
for more information about the
Waste Electrical and Electronic
Equipment (WEEE) Directive.
Visit: www.silva/environment
for more information about the
Waste Electrical and Electronic
Equipment (WEEE) Directive.


Product specificaties

Merk: Silva
Categorie: Lamp
Model: Exceed 4XT

Heb je hulp nodig?

Als je hulp nodig hebt met Silva Exceed 4XT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Lamp Silva

Handleiding Lamp

Nieuwste handleidingen voor Lamp