SII SLP650SE Handleiding
SII
Labelprinter
SLP650SE
Lees hieronder de 📖 handleiding in het Nederlandse voor SII SLP650SE (27 pagina's) in de categorie Labelprinter. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/27
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/sii/slp650se/html/bg1.png)
Smart Label Printers
User's Guide
Models 620, 650, and 650SE
U00128837201
For Windows® XP, Server 2003, Vista and Windows 7
or Mac OS® X 10.5 or later.
Smart Label Printers® Series
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/sii/slp650se/html/bg2.png)
Smart Label Printers User's Guide Models 620, 650, and 650SE
U00128837200 November 2012
U00128837201 February 2013
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/sii/slp650se/html/bg3.png)
1
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
ï‚· Reorient or relocate the receiving antenna.
ï‚· Increase the separation between the equipment and receiver.
ï‚· Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
ï‚· Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Seiko Instruments could void the user's authority to
operate the equipment.
Applicable EC Directives and Standards
Directive Title
2004/108/EC EC Electromagnetic Compatibility Directive
2006/95/EC EC Low Voltage Directive
2011/65/EU Restriction of the ubstances (RoHS) Directive use of certain hazardous s
2009/125/EC Directive on Eco-Design of Energy-related Products
Standards Title
EMC EN55022 class B
EN61000-3-2, EN61000-3-3
EN55024
LVD EN60950-1
For use in Turkey
Complies with Electrical and Electronic Equipment Directive.
Türkiye' deki Kullanı ıc lar için
EEE Yönetmeliğine Uygundur.
Copyright
Copyright © 2012-2013 by Seiko Instruments Inc. All rights reserved. No parts of this publication may be
reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, electronic,
mechanical, photocopying, recording, or otherwise without the prior written permission of Seiko
Instruments Inc. No patent liability is assumed with respect to the use of information contained herein.
While every precaution has been taken in the preparation of this publication, Seiko Instruments USA Inc.
assumes no responsibility for errors or omissions. Nor is any liability assumed for damages resulting
from the use of information contained herein. Further, this publication and features described herein are
subject to change without notice.
Trademark Information
SII and the SII logo are registered trademarks of Seiko Instruments Inc. Smart Label Printer is a
registered trademark and SmartLabels, SmartCapture, SmartCopy and Smart Label Icons are
trademarks of Seiko Instruments USA Inc.
Other brand and product names are trademarks or registered trademarks of their respective holders.
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/sii/slp650se/html/bg4.png)
2
IMPORTANT SAFETY INSTRUCTIONS
The following symbols are used in this User's Guide.
WARNING. Warning statements are used to indicate actions that may result in risk of severe
personal injury or loss of life.
CAUTION. Caution statements are used to indicate actions that may result in damage to the
printer or other property, or may result in risk of minor personal injury.
Warning
1. Use only the AC adapter provided with this printer, or an AC adapter that has been approved by
Seiko Instruments for use with this printer. Use of an incorrect AC adapter may cause risk of
overheating or fire.
2. Do not bend or place a heavy object on the power cord as it could damage the cord and result in risk
of electric shock or fire. Do not use the power cord if damaged or frayed.
3. The thermal head may become quite hot after printing. Be careful when changing labels and
cleaning the thermal head.
Caution
1. Never insert objects of any kind into this printer as they may touch dangerous voltage points or short
out parts, and may result in a risk of fire or electric shock. Never spill liquid of any kind on the printer.
2. This printer contains no user-serviceable parts. Do not attempt to service the printer yourself as this
can expose you to dangerous voltage points or other risks. Repair service should be performed by a
trained technician.
3. Do not use this printer near water or in extreme humidity.
4. Be sure to hold only the connector end of the power cord or interface cable when disconnecting.
Repeated pulling on the cable could damage the cable.
5. If any of the following conditions occur, turn off the printer and unplug the power cord from the power
outlet:
ï‚· The power cord is damaged or frayed.
ï‚· Liquid has been spilled on the printer or the printer has been exposed to rain or water.
ï‚· The printer does not recover from an error or the printer does not operate normally when the
operating instructions are followed.
ï‚· The printer exhibits a distinct change in performance, such as emitting a strange noise, odor or
smoke.
6. Before using your SLP, please remove the clear protective tape covering on the Print Engine Cover
and Roll Cover.
7. When the SLP is unused for a period of time without a label, rubber of the Platen may become stuck.
This condition may cause the printer malfunction. To avoid this, please keep a label loaded in the
SLP — even when not in use.
8. Do not use the SLP without closing the Print Engine Cover.
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/sii/slp650se/html/bg5.png)
3
Installation
For best performance, we recommend that you install your printer on a flat surface in a location that
satisfies the following environmental conditions:
ï‚· Not subject to vibration
ï‚· Not exposed to direct sunlight
ï‚· Dust-free
ï‚· Condensation-free
 Temperatures: 59°F to 95°F (15°C to 35°C)
ï‚· Humidity: 30%RH to 80%RH (non-condensing)
ABOUT THIS GUIDE
As you'll soon realize, the Smart Label Printer is easy to set up and use. Chances are, once you've read
what you need to know in order to get going, you won't have to use this guide except as a quick reminder
or a reference.
This guide will help you set up your SLP 620, 650, and 650SE, install the software, and use your SLP.
In writing this guide we assume that you are familiar with common operations using Microsoft Windows®
XP, Server 2003, Vista or Windows 7 on a Windows compatible PC, or Mac OS® X 10.5 or later on an
Apple Macintosh computer.
This guide has six sections for easy reference:
Introduction, provides some general information about the SLP 620, 650, and 650SE as well as the
Smart Label program.
Getting Started, provides instructions for connecting the SLP 620, 650, and 650SE to your
Windows-compatible PC or Mac, and loading labels into the printer. It also describes how to use on-line
help.
Changing Labels and Printer Care, provides information for replacing a label roll and taking care of
your SLP.
Specifications, provides SLP 620, 650 and, 650SE specifications.
Technical Support and Service, provides technical support and service information.
Ordering Labels and Parts, provides information for ordering SmartLabels, replacement parts, and
accessories.
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/sii/slp650se/html/bg8.png)
6
GETTING STARTED
What You Need
In order to use your SLP and software, you need to have the following:
PC Users:
ï‚· Windows XP, Server 2003, Vista or Windows 7
 IBM® PC or compatible using 233MHz or higher Pentium-compatible CPU
ï‚· Minimum 64MB RAM, 128MB recommended
ï‚· 1.5GB hard disk space
ï‚· USB port or RS232C serial port
ï‚· CD-ROM or DVD drive
Mac Users:
ï‚· Mac OS X v10.5 or later
 PowerPC® G4 (867MHz or higher), G5, or Intel® processor
ï‚· Minimum 512MB RAM
ï‚· Minimum 9GB hard disk space
ï‚· USB port
ï‚· DVD drive
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/sii/slp650se/html/bgb.png)
9
Installing the Software
Installing the Smart Label Program for MacOS X
1. Insert the Smart Label CD. If the installer does not appear automatically, double-click the CD on your
desktop or in the left pane of a new Finder window.
2. Double-click the file SIISmartLabelPrinter.mpkg. The installer will appear. Follow the on-screen
instructions.
3. Mac OS X 10.5 or later will automatically set up your printer, once the SLP is connected.
Installing the Smart Label Program for Windows
1. Insert the Smart Label CD. The installation wizard starts automatically on most systems. If the
introductory screen doesn't appear after a few seconds, do the following:
2. Click the Windows Start button then point to Settings and choose Control Panel.
3. Double-click Add/Remove Programs then click the Install button. Follow the install wizard to assist
with installation.
Please note: If your printer is not recognized or all label templates do not appear, you will need to set-up
your printer within the SLP printer software. Please see "Setting up the Printer".
Product specificaties
Merk: | SII |
Categorie: | Labelprinter |
Model: | SLP650SE |
Heb je hulp nodig?
Als je hulp nodig hebt met SII SLP650SE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Labelprinter SII
![SII](/images/pdf_free.png)
8 Maart 2024
![SII](/images/pdf_free.png)
8 Maart 2024
![SII](/images/pdf_free.png)
8 Maart 2024
Handleiding Labelprinter
- Labelprinter Casio
- Labelprinter Epson
- Labelprinter Honeywell
- Labelprinter Toshiba
- Labelprinter Brother
- Labelprinter Dymo
- Labelprinter Intermec
- Labelprinter Leitz
- Labelprinter Phoenix
- Labelprinter Primera
- Labelprinter Renkforce
- Labelprinter Seiko
- Labelprinter Zebra
- Labelprinter Oki
- Labelprinter Olivetti
- Labelprinter 3M
- Labelprinter Argox
- Labelprinter Metapace
- Labelprinter Citizen
- Labelprinter Custom
- Labelprinter Bixolon
- Labelprinter Brady
- Labelprinter Datacard
- Labelprinter GoDEX
- Labelprinter Kroy
- Labelprinter SATO
- Labelprinter EC Line
- Labelprinter POSline
- Labelprinter TSC
- Labelprinter Labelmate
- Labelprinter Star Micronics
- Labelprinter Datamax-O'neil
- Labelprinter Panduit
- Labelprinter Dascom
- Labelprinter DULA
- Labelprinter Tach-It
- Labelprinter Colop
- Labelprinter Qoltec
- Labelprinter Start International
- Labelprinter Qian
- Labelprinter Ruggard
Nieuwste handleidingen voor Labelprinter
![Zebra](/images/pdf_free.png)
27 Januari 2025
![Zebra](/images/pdf_free.png)
5 Januari 2025
![Epson](/images/logos/epson.png)
14 December 2024
![Ruggard](/images/pdf_free.png)
13 December 2024
![Brother](/images/logos/brother.png)
2 December 2024
![Brother](/images/logos/brother.png)
2 December 2024
![TSC](/images/pdf_free.png)
18 November 2024
![TSC](/images/pdf_free.png)
18 November 2024
![Honeywell](/images/logos/honeywell.png)
16 November 2024
![Brother](/images/logos/brother.png)
2 November 2024