Siemens RDE100FP Handleiding
Siemens
Thermostaat
RDE100FP
Lees hieronder de π handleiding in het Nederlandse voor Siemens RDE100FP (4 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/4
1/4 s - - Operating Instruction CB1B1426en_01 / 2013 07 05 Siemens Building Technologies
s
I Operating nstructions
RDE100 FP
The RDE100FP rogrammer pis a with 3 "Fil Pilote" zones lectto se Comfort or Economy for different mode
zones at any time.
Note: - The Comfort setpoint must be set directly on each radiatorβs thermostat
- T " he radiatorβs operating mode must be set to "Automatic
1 Display
Stop mode
Confirmation
Auto Timer mode
F
Room temperature in
degrees Fahrenheit
View and set Auto Timer
Comfort mode
C
Room temperature in
degrees Celsius
Economy mode
Button lock activated
Escape Room temperature
Setting the weekday and
the time ayof d
Display of zone
Holiday mode setting Weekday 1 = Monday
Weekday 7 = Sunday
T ime of day
Timer bar
Morning: 12 hour format-
Afternoon: 12 hour format-
Current room
temperature
2 Change operating mode
3 Set
4 Ok
5 Decrease zone value
6 Increase zone value
Do you want to the time of day set and the weekday?
Set
Ok
+
β
Mode
!
Proceed as follows:
β’ Press Set and select
β’ Press Ok and the time of day flashes for setting
β’ Press + β or to set the time of day
β’ Press Ok to confirm
β’ W ; eekday flashes press + β or to select the weekday
β’ Press Ok to save
β’ Press M ode to exit or wait for the program to exit automatically
Note:
In the event of power failure followed by power restoration the time of day that the a , flashes means , which user
must adjust it repeat the steps from point 3 above. and
All others setting are saved.
Until the time , the program sends protection all available zones. setting made is commands to
Do you want to lock the buttons?
M Mode Press and hold ode for at least 7 seconds to activate a button lock. Repeat to unlock.
The unit operates normally when the buttons are locked, but changes cannot be made.
Do you want to set your Holiday mode?
Set
Ok
+
β
M ode
!
You can enable Holiday zone mode for all s .The radiator managed by the programmer controls the room
temperature with the rotection setpoint. P
β’ Press Set and select
β’ Press Ok to confirm
β’ Press + β or to set s m the number of days for holiday (0 = Holiday ode Off)
β’ Press Ok to save
β’ When Holiday mode is activated, the remaining days are displayed
Note:
If M ode e .is pressed while Holiday mode is , the function active is deactivated and th symbol disappears
Energy saving tips without loss of comfort
β’ T Select Auto imer mode during the heating period and set the time switch as desired
β’ - Select Economy or Holiday mode for longer periods of non occupancy and during the summer
2/4 s - - Operating Instruction CB1B1426en_01 / 2013 07 05 Siemens Building Technologies
Do you want to change the operating mode?
Mode
+
β
!
For each zone (1, 2 or 3), the unit allows you
to select Comfort, Economy or automatic
mode.
Press + β or z 3; , to select one 1, 2 or then
select the mode using the operating Mode
button.
Comfort mode is the permanent (24 h)
selection of Comfort. Select this operating
mode to maintain Comfort temperature the
without time switch during occupancy (e.g.
periods).
Economy mode is the permanent (24 h)
selection of Economy. Select this operating
mode to maintain Economy temperature the
without time switch (e.g. during the summer
when heating is is used forO )ff . It non-
occupancy periods when you want to
maintain the Economy temperature e.g. at (
night).
AUTO
In Auto Timer mode, the operating
modes (Comfort, Economy) are changed
automatically according to the time switch
settings.
Note:
Stop mode is a special mode when all
" " Fil Pilote stop signals are sent to all valid
and active zones. During Stop mode, you
can only do tasks, either 2 make parameter
settings or the weekday and set the of time
day. When Stop mode is enabled, the zone
number disappears.
You can enable the number of zones via
parameter settings (P18); the default value
is 3.
Do you want to enter your own time switch?
Option 1: Time switch with individual day settings
(P11=0)
Set
Ok
+
β
M ode
!
For the selected zone, you can select
Comfort or Economy mode 15 minute in -
steps throughout the day. The 0:00 to 24:00
hour time bar allow you to ses lect the
operating mode the respectivefor day(s).
Example:
0 6 12 24
18
1 2
ο
Visible bars: Control to Comfort
temperature
ο
Invisible bars: Control to Economy
temperature
When Auto imer mode is enabled, T
changeover between the operating modes is
automatic after the settings are saved.
Proceed as follows:
1) Press + β or to select the zone.
2 ) Press Set and select
AUTO
.
3 ) Press Ok to confirm.
4 T . ) ime switch for Mon (1) is displayed
5) Press + β or to select the day,
from Mon (1) to Sun (7).
6 ) Press O k to confirm the selection and
initiate time programming.
During programming:
7 ) Press Mode to select the operating
mode (Comfort or Economy) or
8) Press + β or to set the time 15 of day in -
minute teps operating s for the selected
mode.
9 ) Press Ok to save the time switch.
10) Repeat remaining days (if steps 5-9 for all
re or quired),
11) Press Mode or wait for the program to exit
automatically.
Note:
Repeat the above steps to program the
remaining zones.
3/4 s - - Operating Instruction CB1B1426en_01 / 2013 07 05 Siemens Building Technologies
Option 2: Time switch with the ttingssame 7 day se-
(P11=1)
Set
Ok
+
β
M ode
!
You can set that all the time switch so
settings apply to the 7 weekdays .
Example:
0 6 12 24
18
1 2
ο
Visible bars: Control to Comfort
temperature
ο
Invisible bars: Control to Economy
temperature
Proceed as follows:
1) Press + β or to select one.the z
2) Set the parameter (P11=1). Please refer
to section "Do you want to change
parameters".
3 ) Press Set and select
AUTO
.
4 ) Press Ok to confirm.
5 β ) Time switch for Mon (1) Sun (7) is
displayed.
6 ) Press Ok to initiate time programming.
During rogrammingp :
7 ) Press Mode to select the operating mode
(Comfort or Economy) or
8) Press + β or to set the time 15 of day in -
minute steps operating for the selected
mode.
9 . ) Press Ok to save the settings
10 to ) Press Mode or wait the program for
exit automatically.
Note:
Repeat the above steps to program the
remaining zones.
Information on the standard "F P " il ilote β
s etpoints
The RDE1001FP is a programmer to manage the used
operating modes.
The setpoints are managed by your electrical radiators or
heaters.
ο . Please refer respective Oto the perating Instructions
According to the standard:"F P " il ilote
The Comfort setpoint must be set directly on the
thermostat of electrical radiator or heater.the
The Economy setpoint is 3 Β°C below the Comfort
setpoint.
The edProtection setpoint is fix at 7 or 8 . Β°C
Option 3: Time switch with 5-2-day settings
(P11=2)
Set
Ok
+
β
M ode
!
You can set Monday Friday and Saturday - -
Sunday at the same time.
Example:
0 6 12 24
18
1 2
ο
Visible bars: Control to Comfort
temperature
ο
Invisible bars: Control to Economy
temperature
Proceed as follows:
1) Press + β or to select the zone.
2) Set the parameter (P11=2). Please refer
to section ou want to change "Do y
parameters?".
3) Press Set and select
AUTO
.
4) Press Ok to confirm.
5) Time switch for Mon β (1) Fri (5) is
displayed.
6) Press + β or to select Mon β (1) Fri (5) or
Sat Sun β (6) . (7)
7) Press Ok to confirm the selection and
initiate time programming.
During programming:
8) Press Mode to select the operating mode
(Comfort or Economy), or
9) Press + β or to set 15 the time of day in -
minute steps operating for the selected
mode.
10) Press to save the Ok settings.
11) Repeat step 10 for the other period if s 6-
necessary, otherwise
12) Press or wait for the program to Mode
exit automatically.
Note:
Repeat the above steps to program the
remaining zones.
Factory default for 7- t day ime switch
Default
value
Day/s Comfort mode Economy mode
Mo (1) β
Fr (5)
6:00 β 8:00 hr
17:00 β 22:00 hr
22:00 β 6:00 hr
8:00 β 17:00 hr
Sa (6) β
Su (7)
β β 7:00 22:00 hr 22:00 7:00 hr
Product specificaties
| Merk: | Siemens |
| Categorie: | Thermostaat |
| Model: | RDE100FP |
Heb je hulp nodig?
Als je hulp nodig hebt met Siemens RDE100FP stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Thermostaat Siemens
15 Oktober 2024
8 April 2024
17 Maart 2024
10 Februari 2024
8 Februari 2024
7 Januari 2024
5 December 2023
21 November 2023
11 November 2023
2 November 2023
Handleiding Thermostaat
- Thermostaat Bosch
- Thermostaat Panasonic
- Thermostaat Bticino
- Thermostaat AEG
- Thermostaat ATAG
- Thermostaat Honeywell
- Thermostaat Junkers
- Thermostaat Nefit
- Thermostaat Remeha
- Thermostaat Vaillant
- Thermostaat ACV
- Thermostaat Agpo Ferroli
- Thermostaat Alecto
- Thermostaat Ambiano
- Thermostaat Amfra
- Thermostaat Arnold Rak
- Thermostaat ATTACK
- Thermostaat AVM
- Thermostaat AWB
- Thermostaat Basetech
- Thermostaat Berker
- Thermostaat Boneco
- Thermostaat Brennenstuhl
- Thermostaat Brink
- Thermostaat Bryant
- Thermostaat Buderus
- Thermostaat Bulex
- Thermostaat Daikin
- Thermostaat Danfoss
- Thermostaat De Dietrich
- Thermostaat Devi
- Thermostaat Devolo
- Thermostaat Dimplex
- Thermostaat Drayton
- Thermostaat Drayton Erie
- Thermostaat Easy Timer
- Thermostaat EasyTemp
- Thermostaat EBERLE
- Thermostaat Econo-Heat
- Thermostaat Elco
- Thermostaat Elektrobock
- Thermostaat Elgato
- Thermostaat Eliwell
- Thermostaat Elro
- Thermostaat ELV
- Thermostaat Emerson
- Thermostaat Emmeti
- Thermostaat Enda
- Thermostaat Eneco
- Thermostaat EQ-3
- Thermostaat Eqiva
- Thermostaat Essent
- Thermostaat Etherma
- Thermostaat Eurotronic
- Thermostaat Extraflame
- Thermostaat Feller
- Thermostaat Ferguson
- Thermostaat Ferroli
- Thermostaat Finder
- Thermostaat GE
- Thermostaat Gira
- Thermostaat Go Green
- Thermostaat Google
- Thermostaat Grasslin
- Thermostaat Grohe
- Thermostaat Hager
- Thermostaat Hama
- Thermostaat Helios (Amfra)
- Thermostaat HomeMatic
- Thermostaat Hornbach
- Thermostaat HQ
- Thermostaat Hugo Muller
- Thermostaat Hunter
- Thermostaat ICY
- Thermostaat Intergas
- Thermostaat IR-V
- Thermostaat Itho
- Thermostaat Itho-Daalderop
- Thermostaat Landis Gyr
- Thermostaat Levica
- Thermostaat Lowes
- Thermostaat Magnum
- Thermostaat Max
- Thermostaat Muller
- Thermostaat Nest
- Thermostaat Netatmo
- Thermostaat Niko
- Thermostaat Nobo
- Thermostaat Noma
- Thermostaat Perel
- Thermostaat Plieger
- Thermostaat Plugwise
- Thermostaat Profile
- Thermostaat Rademacher
- Thermostaat Radson
- Thermostaat REMKO
- Thermostaat Renkforce
- Thermostaat RWE
- Thermostaat Salus
- Thermostaat Saunier Duval
- Thermostaat Schneider
- Thermostaat Silvercrest
- Thermostaat Somfy
- Thermostaat Stiebel Eltron
- Thermostaat Sygonix
- Thermostaat Tado
- Thermostaat Taurus
- Thermostaat Techno Line
- Thermostaat Technoline
- Thermostaat Tesla
- Thermostaat TFA
- Thermostaat Theben
- Thermostaat THERMAFLEX
- Thermostaat Thermy
- Thermostaat TP Link
- Thermostaat Trotec
- Thermostaat Truma
- Thermostaat UPM
- Thermostaat Vasco
- Thermostaat VDH
- Thermostaat Velleman
- Thermostaat Viessmann
- Thermostaat Wachendorff
- Thermostaat Watts
- Thermostaat Webasto
- Thermostaat Weishaupt
- Thermostaat Westfalia
- Thermostaat Wolf
- Thermostaat Worcester-Bosch
- Thermostaat Xavax
- Thermostaat Z-Wave
- Thermostaat Zehnder
- Thermostaat Johnson Control
- Thermostaat Jung
- Thermostaat Oertli
- Thermostaat OJ ELECTRONICS
- Thermostaat Orbis
- Thermostaat Oregon Scientific
- Thermostaat Otio
- Thermostaat Schwaiger
- Thermostaat Fenix
- Thermostaat Conrad
- Thermostaat CorberΓ³
- Thermostaat EMOS
- Thermostaat King
- Thermostaat Cotech
- Thermostaat Avidsen
- Thermostaat Hive
- Thermostaat Kemot
- Thermostaat Coati
- Thermostaat Nexa
- Thermostaat SPC
- Thermostaat Baxi
- Thermostaat Aube
- Thermostaat Carrier
- Thermostaat Cepra
- Thermostaat Delta Dore
- Thermostaat ELKO
- Thermostaat Fantini Cosmi
- Thermostaat Heatmiser
- Thermostaat Heimeier
- Thermostaat Horstmann
- Thermostaat IMIT
- Thermostaat Oventrop
- Thermostaat Seitron
- Thermostaat TrickleStar
- Thermostaat TylΓΆ
- Thermostaat Vemer
- Thermostaat Warmup
- Thermostaat Fibaro
- Thermostaat Energenie
- Thermostaat Mikoterm
- Thermostaat Ariston Thermo
- Thermostaat Carel
- Thermostaat Busch-Jaeger
- Thermostaat EVE
- Thermostaat Optima
- Thermostaat Frico
- Thermostaat EQ3
- Thermostaat Homematic IP
- Thermostaat Computherm
- Thermostaat Wattio
- Thermostaat Crestron
- Thermostaat ORNO
- Thermostaat POER
- Thermostaat Heatit
- Thermostaat 2Heat
- Thermostaat Veria
- Thermostaat ThermoSmart
- Thermostaat Yokis
- Thermostaat Vimar
- Thermostaat PECO
- Thermostaat H-Tronic
- Thermostaat Intertechno
- Thermostaat Tru Components
- Thermostaat Emko
- Thermostaat Innogy
- Thermostaat Wallair
- Thermostaat Maico
- Thermostaat HomePilot
- Thermostaat Ouellet
- Thermostaat ChiliTec
- Thermostaat Tellur
- Thermostaat Jumo
- Thermostaat Qubino
- Thermostaat STI
- Thermostaat Gewiss
- Thermostaat Sinustec
- Thermostaat Rose LM
- Thermostaat MundoControl
- Thermostaat Bearware
- Thermostaat GENERAL Life
- Thermostaat Oreg
- Thermostaat Braeburn
Nieuwste handleidingen voor Thermostaat
18 December 2024
18 December 2024
17 December 2024
16 December 2024
16 December 2024
15 December 2024
11 December 2024
10 December 2024
9 December 2024
9 December 2024