Siemens N2264 Handleiding

Siemens Thermostaat N2264

Lees hieronder de 📖 handleiding in het Nederlandse voor Siemens N2264 (12 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

CE1N2264en

23.04.2002

Siemens Building Technologies

HVAC Products

2264

Self-learning Room

Temperature Controller REV23

5 operating modes, heating / cooling functions and menu selection via roller selector

• Mains-independent room temperature controller

• Straightforward, self-explanatory menu selection via roller selector

• Self-learning 2-position controller providing PID mode (patented)

• Choice of operating modes:

automatic with maximum 3 heating or cooling periods, continuously comfort

mode, continuously economy mode, frost protection with one 24-hour operat-

ing mode and one heating or cooling period

• In automatic mode, one temperature setpoint can be adjusted for each heating

or cooling period

• Control of cooling equipment

Use

For the control of the room temperature in:

• Apartments, single-family or holiday houses

• Offices, individual rooms, consulting rooms or commercially used spaces

For control of the following pieces of equipment:

• Solenoid valves of instantaneous water heaters

• Solenoid valves of atmospheric gas burners

• Forced draft gas or oil burners

• Circulating pumps in heating systems, zone valves

• Electric direct heating systems or fans of electric storage heaters

• Thermic actuators

• Cooling and refrigeration equipment

2/12

Siemens Building Technologies Room Temperature Controller REV23 CE1N2264en

HVAC Products 23.04.2002

Functions

• PID mode with self-learning or selectable switching cycle

• 2-position control

• Automatic mode with 7-day switching program for 24-hour, working day, weekend or

7-day operation with up to 3 heating or cooling periods per day

• One temperature setpoint for each heating or cooling period

• One 24-hour operating mode with one heating or cooling period

• Remote operation

• Override button

• Sensor calibration and reset function

• Frost protection function or overtemperature protection

• Limitation of the minimum setpoint

• Holiday mode

• Heating or cooling mode

• Periodic pump run

• Optimum start control for the first heating period

Ordering

Room temperature controller with 7-day time switch REV23

When ordering, please give the type reference.

The controller is supplied complete with batteries.

Technical design

Display and

operating elements

Operating elements

Selection of operating mode

Warmer button

Colder button

Override button

Roller selector for the menu, submenu and settings

Confirm by pressing

Leaving the current menu level and returning to the menu level

previously active (the settings currently displayed will be ac-

cepted)

3/12

Siemens Building Technologies Room Temperature Controller REV23 CE1N2264en

HVAC Products 23.04.2002

Display

Time of day

° C Room temperature

Change batteries (display appears about 3 months before bat-

teries are exhausted)

Remote operation active

Holiday mode active

Selection of operating mode (only one operating mode is activ)

Automatic mode

Comfort mode

Economy mode

Frost protection or overtemperature protection

24-hour mode with one heating or cooling period

(heating or cooling period is automatically generated from the

current 24-hour program)

Temporary change of the current setpoint temperature

(change only active until the next switching point is reached)

° C When pressing the + or – button once, the adjusted setpoint

temperature will be displayed. It can be readjusted in incre-

ments of 0.2 °C (max. +/- 4 °C).

Override button

In operating modes and , this button can be used to switch from comfort

to economy temperature, or vice versa. The selection is maintained until the

next switching point is reached or until the operating mode is changed.

Menu-driven user settings: 4 main menus available

Time of day and day Main menu Submenu Settings

hCurrent time of day

Current day of week

Temperature Main menu Submenu Factory settings – heating / cooling

T Setpoint comfort mode 19 °C 23 °C

Setpoint economy mode 16 °C 29 °C

Setpoint frost

or overtemperature protection 5 °C 35 °C

Product specificaties

Merk:	Siemens
Categorie:	Thermostaat
Model:	N2264

Heb je hulp nodig?

Als je hulp nodig hebt met Siemens N2264 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Thermostaat Siemens

Siemens RDG100T Handleiding

15 Oktober 2024

Siemens Landis & Staefa REV22RF Handleiding

8 April 2024

Siemens RDG160T Handleiding

17 Maart 2024

Siemens RDF600KN Handleiding

10 Februari 2024

Siemens REV23M Handleiding

8 Februari 2024

Siemens Landis & Staefa RAV11 Handleiding

7 Januari 2024

Siemens REV23.03RF Handleiding

5 December 2023

Siemens REV200 Handleiding

21 November 2023

Siemens QAW20 Handleiding

11 November 2023

Siemens RDE100 Handleiding

2 November 2023

Handleiding Thermostaat

Nieuwste handleidingen voor Thermostaat

Tru Components TCN4S-24R Handleiding

18 December 2024

Tru Components TK4S-14RC Handleiding

18 December 2024

Tru Components TX4S-14R Handleiding

17 December 2024

Warmup 5iE Handleiding

16 December 2024

Warmup +Kit Handleiding

16 December 2024

Nobo Connect SWT-IZW Handleiding

15 December 2024

Nobo Connect SWT-IZB Handleiding

11 December 2024

Hive Thermostat Handleiding

10 December 2024

GENERAL Life HT15S Handleiding

9 December 2024

GENERAL Life HT15 Handleiding

9 December 2024