Siemens Hipath 3800 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Siemens Hipath 3800 (4 pagina's) in de categorie Telefonie switch. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
key feature summary
Feature Activate Cancel
Appointment Reminder *46 + HH:MM #46
Call Back *58 #58
Call Park *56 #56 (retrieve call)
Call Waiting (Accept Call) *55
Conference *3 #3
Divert (All Calls) *11 #1
Divert (External Calls) *12 #1
Divert (Internal Calls) *13 #1
Do Not Disturb *97 #97
Mute on/off *52 (on) #52 (off)
Night Answer *44 (on) #44 (off)
Program Feature Key *91
Send Messages *68 + Station No. +0-9 #68
Speed Dial Key *7 + * + location no.
Speed Dial Key - changing *92
call back
(display handset)
When an internal call is made,
the display will show: Call Back?,
if the extension is busy or the
call is not answered.
a Press ✓ to initiate the call back feature
b When the extension becomes free,
the display will show:
Call Back: (Name of caller).
c Lift the handset and the system will
connect you with the extension.
In order to cancel the Call Back feature,
enter #58.
(non display handset)
a Press Enquiry/Consultation key
b Enter *58 to activate Call Back feature
when you hear the busy tone.
how to program and
interrogate feature keys
(display handset)
a Enter *91 OR press the [Program/Service]
button and select the feature by using the
menu keys.
b Display will show: Press feature key
c Select the feature key you wish to
program (if a feature has been set it
will be displayed).
d Display will show: Change feature?
*You can use the menu keys to make
further selections eg: Delete feature,
program another key? End?.
e Press ✓ to confirm the selection
f Enter feature code eg: *97 for Do Not
Disturb, or a phone number (if external you
must include '0' or the external access
code eg 0 988 1234).
program and activate
speed dial keys
(display handset)
a Enter *92 OR press the
[Program/Service] button and select
the feature by using the menu keys.
b Enter *+ (number you wish to program
0-9).
c Display will show: Change entry?
(You can use the menu keys to make
further selections,
eg: Delete?, End?, Next Entry?).
d Press ✓ to confirm the selection
e Enter the phone number (include '0'
or the external line access code.
(non display handset)
a Enter *92
b Enter *+ (number you wish to
program 0-9).
c Enter the phone number (include '0'
or the external line access code).
d After you have completed dialling
the number, wait 5 seconds).
To activate speed dial keys
a Enter *7
b Enter * (number you wish to access
*0-*9 or 000 - 999).
c The number will be automatically dialled.
conference calls
(display handset)
a Dial or receive the first call
b Display will show: Enquiry?
c Press ✓ to confirm the selection
d Dial the extension or external number you
wish to conference.
e Display will show: Quit and Return?,
use < > to select 'Conference'.
f Press ✓ to confirm the selection
(non display handset)
The user is on a call, in order
to conference:
a Press Enquiry key
b Dial the extension or external number
you wish to conference.
c Press Enquiry key when the other person
answers.
d You will then hear dial tone
e Enter *3 to conference all parties
diverting calls
(display handset or non display handset)
When using an entry or analogue
phone you must lift the handset.
Whilst on any other Commander
e-Path phone, this is not necessary.
a Enter *11 (divert all calls) or *12 (external
calls) OR *13 (internal calls).
b Enter where you wish to divert calls to..
Eg: Reception or voicemail '350'
(if available). NB: #1 will cancel divert.
do not disturb
(display handset)
a Use menu keys to navigate through
display menu until you reach DND on?
b Display will show: DND on?
c Press ✓ to confirm the selection
To turn DND off, use menu keys to navigate
through display until you reach DND Off?
(non display handset)
a Enter *97 to active DND
NB: #97 will cancel DND.
using the phone book
(display handset)
a Use menu keys to navigate through display
menu until you reach Phonebook?
b Press ✓ to confirm the selection
c Display will show: Scroll Next?
(You can use the menu keys to make
further selections eg: Scroll Previous?
Call? etc).
Alternatively you can use the alphanumeric
keypad to navigate more quickly through
the Phone Book (instead of performing
step 3 above). Eg: By pressing 7 three times
(R) will take you to the first name starting
with 'R' .
Commander Australia Limited
Sales 1300 138 833 Service 1300 138 899
www.commander.com
HiPath 3800
User Guide
This brochure is issued to provide product outline information
only. It is not to form part of any order or contract.
Any applications of products shown in this brochure are for
illustration purposes only and do not give or imply any licences
or rights to use the information for any purposes whatsoever.
Commander reserves the right to alter without notice the
specification, design, price or conditions of supply of any product
or service.
®
Commander is the registered trademark of Commander
Australia Limited ACN 082 384 343
CDR1106 09/05 S/I 823/008
features
handset
speaker (ringing tones/open listening)
volume/pitch control
microphone for handsfree talking
qwerty keyboard
menu key "OK" for feature selection
keypad
menu keys "next" and "previous"
display (2 lines, 24 characters per line)
five fixed function keys
> program/service
> redial
> internal or mute
> speaker
> release
LEDs (with/without functions)
programmable keys
menu keys
(display phones only)
On display phones, the menu
buttons are a powerful feature, which
can enhance the use of your phone.
The display will prompt the user with
features, therefore there is no need to
remember feature codes such as *11.
More importantly, the menu keys
can be used whilst on a call therefore
it is simple to perform functions such
as call transfer and conference.
Thank you for choosing the Commander® HiPath 3800 phone system.
This User Guide takes you through the main features that you will
be using on a regular basis. It is divided into two sections, covering
operation with the display and non display handsets (as shown below).
01
02
03
04
05
06
07
08
09
10
11
12
HiPath 3800 features
04 0605 0701 02 03 0908 10 11 12 01 02 03 07 121101 02 03 0406 07 09 10 1211
08
Confirm
Selection
Previous Next
telephone settings
(display phones)
Bring up the telephone settings by
pressing either the + OR – buttons
located next to the hand-piece.
a Display will show: ringer volume?
b Press ✓ to confirm the selection or NEXT
c Alter settings using the + OR – buttons
(non display phones)
Bring up the telephone settings by
pressing either the + OR – buttons
located next to the hand-piece.
a Press the + OR – buttons
b Select the feature which you wish to alter
eg. 1 – ringer volume, 2 – ring tone.
c Alter settings using the + OR – buttons
answering calls
Lift the handset OR select the
Speaker Key for hands-free use.
making calls (external)
Lift the handset OR select the
Speaker Key, then;
a Dial 0 (or the external access code)
for an outside line, followed by
the external number.
b Select the programmed feature key
c Press *7 (access the abbreviated
dialling number) followed by *0 - *9.
d For System Speed dials press *7
and then 000 - 999.
making calls (internal)
Lift the handset OR select the
Speaker Key and;
a Dial the extension number
b Select the programmed feature key
c Select name from the phonebook
transferring calls
(display handset)
a Display will show: enquiry?
b Press ✓ to confirm the selection
c Dial the extension number
d Introduce the call OR just hang up
If the extension is busy and does not answer,
your display will show: Return to held call?
Press ✓ to return to the held caller.
(non display phones)
a Press enquiry key
b Dial the extension number
c Introduce the call OR just hang up
accepting a second call
(display handset)
You will receive a camp on tone
indicating that a second caller is
attempting to contact you.
a Display will show: Accept Camp On?
b Press ✓ to accept second call
(first will automatically go on hold).
c Use the Menu Keys < > to make a
selection from the display eg: Return to
Held Call, Conference, Transfer etc.
d Press ✓ to confirm the selection
(non display handset)
a You will hear a beep indicating that a
second caller is attempting to contact you.
b Press the enquiry key
c Enter *55 (Accept call waiting –
transfer to other caller).
First caller is placed on hold.
d Return to first caller press enquiry key
features
handset
speaker (ringing tones/open listening)
volume/pitch control
microphone for handsfree talking
qwerty keyboard
menu key "OK" for feature selection
keypad
menu keys "next" and "previous"
display (2 lines, 24 characters per line)
five fixed function keys
> program/service
> redial
> internal or mute
> speaker
> release
LEDs (with/without functions)
programmable keys
menu keys
(display phones only)
On display phones, the menu
buttons are a powerful feature, which
can enhance the use of your phone.
The display will prompt the user with
features, therefore there is no need to
remember feature codes such as *11.
More importantly, the menu keys
can be used whilst on a call therefore
it is simple to perform functions such
as call transfer and conference.
Thank you for choosing the Commander® HiPath 3800 phone system.
This User Guide takes you through the main features that you will
be using on a regular basis. It is divided into two sections, covering
operation with the display and non display handsets (as shown below).
01
02
03
04
05
06
07
08
09
10
11
12
HiPath 3800 features
04 0605 0701 02 03 0908 10 11 12 01 02 03 07 121101 02 03 0406 07 09 10 1211
08
Confirm
Selection
Previous Next
telephone settings
(display phones)
Bring up the telephone settings by
pressing either the + OR – buttons
located next to the hand-piece.
a Display will show: ringer volume?
b Press ✓ to confirm the selection or NEXT
c Alter settings using the + OR – buttons
(non display phones)
Bring up the telephone settings by
pressing either the + OR – buttons
located next to the hand-piece.
a Press the + OR – buttons
b Select the feature which you wish to alter
eg. 1 – ringer volume, 2 – ring tone.
c Alter settings using the + OR – buttons
answering calls
Lift the handset OR select the
Speaker Key for hands-free use.
making calls (external)
Lift the handset OR select the
Speaker Key, then;
a Dial 0 (or the external access code)
for an outside line, followed by
the external number.
b Select the programmed feature key
c Press *7 (access the abbreviated
dialling number) followed by *0 - *9.
d For System Speed dials press *7
and then 000 - 999.
making calls (internal)
Lift the handset OR select the
Speaker Key and;
a Dial the extension number
b Select the programmed feature key
c Select name from the phonebook
transferring calls
(display handset)
a Display will show: enquiry?
b Press ✓ to confirm the selection
c Dial the extension number
d Introduce the call OR just hang up
If the extension is busy and does not answer,
your display will show: Return to held call?
Press ✓ to return to the held caller.
(non display phones)
a Press enquiry key
b Dial the extension number
c Introduce the call OR just hang up
accepting a second call
(display handset)
You will receive a camp on tone
indicating that a second caller is
attempting to contact you.
a Display will show: Accept Camp On?
b Press ✓ to accept second call
(first will automatically go on hold).
c Use the Menu Keys < > to make a
selection from the display eg: Return to
Held Call, Conference, Transfer etc.
d Press ✓ to confirm the selection
(non display handset)
a You will hear a beep indicating that a
second caller is attempting to contact you.
b Press the enquiry key
c Enter *55 (Accept call waiting –
transfer to other caller).
First caller is placed on hold.
d Return to first caller press enquiry key


Product specificaties

Merk: Siemens
Categorie: Telefonie switch
Model: Hipath 3800

Heb je hulp nodig?

Als je hulp nodig hebt met Siemens Hipath 3800 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Telefonie switch Siemens

Handleiding Telefonie switch

Nieuwste handleidingen voor Telefonie switch