Shure VP82 Handleiding

Shure Microfoon VP82

Lees hieronder de 📖 handleiding in het Nederlandse voor Shure VP82 (15 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/15

Microphone canon compact

Kompaktes Richtrohrmikrofon

Micrófono de cañón compacto

Microfono a canna di fucile compatto

Компактный линейный микрофон

コンパクトショットガンマイクロホン

컴팩트 샷건 마이크

紧凑型枪式话筒

Compact Shotgun Microphone

VP82

www.shure.com

Printed in U.S.A.

27A22327 (Rev. 2)

WIRED MICROPHONE

Cartridge Type Electret Condenser

Polar Pattern Supercardioid/lobar

Frequency Response 90 to 20,000 Hz

Output Impedance 144Ω

Sensitivity

open circuit voltage, @ 1 kHz,

typical

-36.0 dBV/Pa[1] (15.8 mV)

Maximum SPL

1 kHz at 1% THD[2]

2500 Ω load: 137.5 dB SPL

1000 Ω load: 131.5 dB SPL

Signal-to-Noise Ratio[3] 79 dB

Dynamic Range

@ 1 kHz

2500 Ω load: 122.5 dB

1000 Ω load: 116.5 dB

Clipping Level

@ 1 kHz, 1% THD

2500 Ω load: 7.0 dBV

1000 Ω load: 0.0 dBV

Self Noise

equivalent SPL, A-weighted,

typical

15.0 dB SPL-A

Common Mode Rejection

20 to 20,000 Hz ≥55dB

Operating Temperature Range -18°C (0°F) to 57°C (135°F)

Storage Temperature Range -29°C (-20°F) to 74°C (165°F)

Operating Relative Humidity 0 to 95%

Polarity Positive pressure on diaphragm produces positive voltage on

pin 2 with respect to pin 3

Housing Satin-black vinyl painted aluminum alloy with stainless steel

screen

Power Requirements 11–52 V DC[4]

phantom power (IEC-61938), <2.0 mA

Net Weight 76 g (2.7 oz.)

[1] 1 Pa=94 dB SPL

[2]THD of microphone preamplifier when applied input signal level is equivalent to cartridge output

at specified SPL

[3]S/N ratio is the difference between 94 dB SPL and equivalent SPL of self noise, A-weighted

[4]All specifications measured with a 48 Vdc phantom power supply. The microphone operates at

lower voltages, but with slightly decreased headroom and sensitivity.

General Description

The VP82 is a professional shotgun microphone for use in sound capture and

reinforcement. Compact and lightweight, with wide aperture and excellent

off-axis rejection, the VP82 is the affordable and reliable choice for camera-

mounted A/V media production applications.

Features

• Premier production microphone crafted with Shure quality, ruggedness,

and reliability

• Highly directional, uniform polar pattern optimized for distant pickup

• Low self-noise and high output level

• Lightweight, compact design accommodates prolonged operation,

minimizing operator fatigue attributed to many shotgun microphones

• Class A, discrete, transformerless preamplifier provides transparent,

extremely fast transient response with no crossover distortion and minimal

harmonic and intermodulation distortion

• Aircraft-grade aluminum alloy construction resists wear and abuse

• Operates over a wide range of temperatures and humidity

Rycote Custom Accessories

Shure offers custom Rycote

® suspension mounting and wind-protection solu-

tions designed for Shure VP shotgun microphones.

Wind-Protection

Use the supplied foam windscreen to reduce wind-noise. For increased pro-

tection, Shure offers two premium Rycote

® windshield accessories:

• Attenuates up to 25 dB of wind-noise.Softie Windshield:

• Attenuates up to 38 dB of wind-noise while Suspension Windshield Kit:

preserving critical high frequencies. Included Lyre suspension mounts

provide up to 25 dB of isolation.

Suspension Mounts

Shure offers four Rycote® Softie Lyre Mounts to reduce handling noise and

low-frequency vibrations by up to 15 dB:

• Secures directly onto standard camera shoe.InVision Video:

• Fits into a standard camera clamp.Camera Clamp Adapter (CCA):

• Adjustable handheld mount.Pistol Grip:

Note: All Softie Lyre Mounts (except InVision Video) are equipped with 3/8”

and 5/8” female threaded adapters for additional mounting options.

Load Impedance

Maximum SPL capability, output clipping level, and dynamic range vary with

the input load impedance of the preamplifier to which the microphone is con-

nected. Shure recommends a minimum input load impedance of 1000 Ohms.

Most modern microphone preamplifiers meet this requirement. Higher imped-

ance results in better performance for these specifications.

Power Requirements

This microphone requires phantom power and performs best with a 48 V DC

supply (IEC-61938), but it can operate with supplies as low as 11 V DC. Most

modern mixers provide phantom power and require the use of a balanced

microphone cable: XLR-to-XLR or XLR-to-TRS.

Specifications

XLR Connector Gasket

This microphone is supplied with a small corrugated rubber ring in the XLR

connector to absorb the mechanical slack between the microphone and

cable. Many high-end cables are made with a rubber shoulder on the XLR-F

for the same purpose. When connecting this microphone to a cable with a

rubber shoulder XLR-F connector, remove the corrugated rubber ring from

the microphone to ensure a proper fit.

XLR-F

rubber shoulder

MICROPHONE

corrugated rubber ring

A89SW-KIT

A89SW

Accessoires en option

Accessoires fournis

Optionales Zubehör

Mitgeliefertes Zubehör

Accesorios opcionales

Accesorios suministrados

Accessori in opzionali

Accessori in dotazione

Дополнительные

принадлежности

Принадлежности,

входящие в комплект

オプションの付属品

付属アクセサリー

옵션 액세서리

기본 제공 액세서리

Foam Windscreen

Bonnette anti-vent en mousse

Schaumstoff-Windschutz

Paravientos de espuma

Antivento in schiuma poliuretanica

Пенопластовый ветрозащитный экран

フォームウィンドスクリーン

폼 윈드스크린

海绵防尘罩

Windshield Kit

Kit de bonnette de protection

Windschutzsatz

Juego de paravientos

Kit antivento

Комплект ветрозащитного подвеса

ウィンドシールドキット

윈드쉴드 키트

防风套件

Furnished Accessories

Optional Accessories 可选配附件

提供的附件

拉链便携包

지퍼가 부착된 휴대용 백

Zippered Carrying Bag

Fourre-tout pour le transport à fermeture éclair

Tragetasche mit Reißverschluss

Bolsa para transporte con cremallera

Custodia con cerniera, adatta per il trasporto

Футляр на застежке-молнии

ジッパー付きキャリングバッグ

5/8” to 3/8” Thread Adapter

31A1856

Adaptateur de filetage 5/8” à 3/8”

5/8 Zoll zu 3/8 Zoll Gewindeadapter

Adaptador roscado de 5/8 a 3/8 pulg

Adattatore con filettatura da 5/8 a 3/8 di pollice

Резьбовой переходник 5/8 на 3/8 дюйма

5/8”－ 3/8”ネジアダプター

5/8” 에서 3/8” 스레드 어댑터

5/8 英寸至 3/8 英寸螺纹转接器

Microphone Clip

A57F

Pince de microphone

Mikrofonklemme

Pinza para micrófono

Clip per microfono

Зажим для микрофона

マイククリップ

마이크 클립

话筒夹

95A2313

Product specificaties

Merk:	Shure
Categorie:	Microfoon
Model:	VP82
Kleur van het product:	Zwart
Hoogte:	195 mm
Soort:	Shotgun-microfoon
Materiaal behuizing:	Aluminium, Stainless steel
Stroombron:	DC
Connectiviteitstechnologie:	Bedraad
Diameter:	22 mm
Ingangsspanning:	11 - 52 V
Opbergetui:	Ja
Aansluiting:	XLR-3
Verpakkingsinhoud:	Microphone Clip A57F\n5/8” to 3/8” Thread Adapter 31A1856
Microphone direction type:	Supercardioïde
Gevoeligheid microfoon:	-36 dB
Spreekspoel types:	Condensor
Frequentie microfoon:	90 - 20000 Hz
Bedrijfstemperatuur (T-T):	-18 - 57 °C
Maximaal geluidsdrukniveau (1 kHz):	131.5 dB
Gewicht microfoon:	76 g
Output impedance:	144 Ohm
Microfoon Signal-to-Noise Ratio (SNR):	79 dB
Gevoeligheid (1 kHz):	15.8 mV/Pa
Microphone dynamic range:	116.5 dB
Inclusief windscherm:	Ja