Shure MX395 Handleiding

Shure Microfoon MX395

Lees hieronder de 📖 handleiding in het Nederlandse voor Shure MX395 (9 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/9

1/9

MX395 -- Low-Profile Boundary Microphone

General Description

Shure MX395 low-profile microphones are for use in boardrooms and other sites where aesthetics are important.

The MX395 is only 2.5 cm (1 in.) in diameter, and extends just 2 cm above the mounting surface when installed.

Despite its small size, the MX395 delivers clear, high quality sound.

Features

•Low profile, aesthetic design

•Wide dynamic range and smooth frequency response

•RF filtering with CommShield technology

•Available with logic-controlled bi-color status indicator

Model Variations

The MX395 is available in cardioid, omnidirectional, and bidirectional polar patterns, with or without an LED status

indicator, with a black, white, or aluminum finish.

Polar Patterns

The polar pattern is indicated by the molded grille.

Microphone Placement

For best low-frequency response and rejection of background noise, place the microphone on a large, flat surface,

such as a floor, table, or lectern.

To reduce reverberance, avoid reflective surfaces above or to the side of the microphone, such as beveled sides

of pulpits or overhanging shelves.

Shure Incorporated

2/9

DIP Switches

Set DIP Switch 1 up to engage the low cut filter, which attenuates frequencies by 6 dB per octave below 150 Hz.

Switch Down (default) Up

1 Full frequency response Low cut filter

2 -- --

Installation

Install the microphone into a tabletop as shown.

Important:

•Align indentation toward talker

Shure Incorporated

3/9

•Do not over tighten the wing nut, as this reduces shock isolation

LED Logic

For models equipped with an LED, use the included 5-pin XLR connector to wire the microphone to an automatic

mixer or other logic device.

Note: Connect the LED IN to the gate output to illuminate the LED when the channel is gated on.

Do not use the relay ports on Crestron and AMX devices. Use the I/O logic ports instead.

The LED logic may not function when connecting to devices that do not have internal "pull-up resistor" logic cir-

cuits, such as ClearOne DSP products. External pull-up resistor circuits can be added for each microphone. Vistit

www.shure.com/FAQ for detailed instructions.

Logic Connection

Connection to device with internal "pull-up resistor" logic circuit

Product specificaties

Merk:	Shure
Categorie:	Microfoon
Model:	MX395
Kleur van het product:	Zwart
Hoogte:	101 mm
Soort:	Tafelmicrofoon
Stroombron:	DC
Connectiviteitstechnologie:	Bedraad
Diameter:	38 mm
LED backlight:	Ja
Ingangsspanning:	48 - 52 V
Temperatuur bij opslag:	-29 - 74 °C
Aansluiting:	XLR-5
Stroomverbruik:	8 mA
Signaal/ruis-verhouding:	73 dB
Microphone direction type:	Omnidirectioneel
Gevoeligheid microfoon:	-28 dB
Frequentie microfoon:	50 - 17000 Hz
Bedrijfstemperatuur (T-T):	-18 - 57 °C
Gewicht microfoon:	136 g
Dynamisch bereik:	93 dB
Output impedance:	150 Ohm
Mixtype microfoon:	Auto