Shure MX393 Handleiding

Shure Microfoon MX393

Lees hieronder de 📖 handleiding in het Nederlandse voor Shure MX393 (28 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/28

Printed in U.S.A.

www.shure.com

27A14047 (Rev. 2)

MX300 SERIES

MX392 MX393

Features

• Flat frequency response across the vocal range

for uncolored sound

• Interchangeable cartridges that provide a

choice of polar pattern for each application

• Sleek, low-profile design for surface mounting

• Programmable mute button

• LED indicator

• Logic input/output for remote control or use with

automatic mixers (MX392 models only)

• RF filtering

Model Variations

MX392: Attached, unterminated cable and

programmable logic input and output.

MX393: Detachable cable with XLR output

connector.

The polar pattern of the included cartridge is indi-

cated by a model number suffix:

/C Cardioid

/S Supercardioid

/O Omnidirectional

Interchangeable Cartridges

Microflex microphones use interchangeable car-

tridges that allow you to choose the polar pattern

for different installations.

/C (R185)

/S (R184)

/O (R183)

Remove Bracket

Remove Grille

R183 Omnidirectional

R184

Supercardioid

R185 Cardioid

Permanent Installation

Microphone Placement

For best low-frequency response and rejection

of background noise, place the microphone on

a large, flat surface, such as a floor, table, or

lectern.

To reduce reverberance, avoid reflective surfaces

above or to the side of the microphone, such as

beveled sides of pulpits or overhanging shelves.

MX392 & MX393

1. Remove grille to access mounting key holes.

2. Cut slots into pads.

3. Slide microphone forward to engage screws in

slots.

If using rear side-exit cable option, only drill two

outer holes. If re-routing for cable bottom exit,

(MX392 only), drill all three holes.

MX300

Boundary

Microphones

Shure Microflex® MX300 Series microphones are

surface-mounted electret condenser microphones

designed primarily for mounting on conference ta-

bles, stage floors, and lecterns. Their high sensi-

tivity and wide frequency range make them espe-

cially suitable for picking up speech and vocals in

sound reinforcement and recording applications.

Interchangeable cartridges provide the installer

with greater flexibility and make it possible to eas-

ily reconfigure microphone coverage as the need

arises. The MX392 and MX393 models include an

internal preamplifier.

MX300 Series microphones take advantage of the

principle that, at a barrier or boundary, the sound

pressure level doubles. When placed near a suf-

ficiently large boundary surface, the microphone

has 6 dB higher sensitivity and approximately 3

dB greater direct-to-reverberant sound ratio.

Cartridge

Product specificaties

Merk:	Shure
Categorie:	Microfoon
Model:	MX393
Kleur van het product:	Zwart
Snoerlengte:	3.5 m
Soort:	Tafelmicrofoon
Stroombron:	DC
Connectiviteitstechnologie:	Bedraad
Microfoon mute:	Ja
Ingangsspanning:	11 - 52 V
Temperatuur bij opslag:	-29 - 74 °C
Aansluiting:	XLR-3
Stroomverbruik:	2 mA
Signaal/ruis-verhouding:	73 dB
Microphone direction type:	Supercardioïde
Gevoeligheid microfoon:	-28 dB
Frequentie microfoon:	50 - 17000 Hz
Bedrijfstemperatuur (T-T):	-18 - 57 °C
Gewicht microfoon:	172 g
Output impedance:	180 Ohm
Mixtype microfoon:	Auto