Shure Microflex MX393 Handleiding

Shure Microfoon Microflex MX393

Lees hieronder de 📖 handleiding in het Nederlandse voor Shure Microflex MX393 (28 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
Printed in U.S.A.
www.shure.com
© 201 Shure Incorporated
27A14047 (Rev. 2)
MX300 SERIES
MX392 MX393
3
Features
• Flat frequency response across the vocal range
for uncolored sound
• Interchangeable cartridges that provide a
choice of polar pattern for each application
• Sleek, low-profile design for surface mounting
• Programmable mute button
• LED indicator
• Logic input/output for remote control or use with
automatic mixers (MX392 models only)
• RF filtering
Model Variations
MX392: Attached, unterminated cable and
programmable logic input and output.
MX393: Detachable cable with XLR output
connector.
The polar pattern of the included cartridge is indi-
cated by a model number suffix:
/C Cardioid
/S Supercardioid
/O Omnidirectional
Interchangeable Cartridges
Microflex microphones use interchangeable car-
tridges that allow you to choose the polar pattern
for different installations.
/C (R185)
/S (R184)
/O (R183)
Remove Bracket
Remove Grille
R183 Omnidirectional
R184
Supercardioid
R185 Cardioid
Permanent Installation
Microphone Placement
For best low-frequency response and rejection
of background noise, place the microphone on
a large, flat surface, such as a floor, table, or
lectern.
To reduce reverberance, avoid reflective surfaces
above or to the side of the microphone, such as
beveled sides of pulpits or overhanging shelves.
MX392 & MX393
1. Remove grille to access mounting key holes.
2. Cut slots into pads.
3. Slide microphone forward to engage screws in
slots.
If using rear side-exit cable option, only drill two
outer holes. If re-routing for cable bottom exit,
(MX392 only), drill all three holes.
MX300
Boundary
Microphones
Shure Microflex® MX300 Series microphones are
surface-mounted electret condenser microphones
designed primarily for mounting on conference ta-
bles, stage floors, and lecterns. Their high sensi-
tivity and wide frequency range make them espe-
cially suitable for picking up speech and vocals in
sound reinforcement and recording applications.
Interchangeable cartridges provide the installer
with greater flexibility and make it possible to eas-
ily reconfigure microphone coverage as the need
arises. The MX392 and MX393 models include an
internal preamplifier.
MX300 Series microphones take advantage of the
principle that, at a barrier or boundary, the sound
pressure level doubles. When placed near a suf-
ficiently large boundary surface, the microphone
has 6 dB higher sensitivity and approximately 3
dB greater direct-to-reverberant sound ratio.
Cartridge


Product specificaties

Merk: Shure
Categorie: Microfoon
Model: Microflex MX393

Heb je hulp nodig?

Als je hulp nodig hebt met Shure Microflex MX393 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Microfoon Shure

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon