Shure BM6620 Handleiding

Shure Microfoon BM6620

Lees hieronder de 📖 handleiding in het Nederlandse voor Shure BM6620 (12 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

1/12

BM6620 -- Boundary Microphones

BM 6620 Boundary Microphone

Important Safeguards

1. - All the safety and operating instructions should be read before the apparatus or Read these instructions

system is operated.

2. - The important safety instructions and operating instructions should be retained for Keep these instructions

future reference.

3. - All warnings on the apparatus and in the operating instructions should be adhered to.Follow all warnings

4. - All instructions for installation or use/operating should be followed.Follow all instructions

5. - Do not use this apparatus in a water or moistures environment - for Do not use this apparatus near water

example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, near a swimming pool, in

an unprotected outdoor installation, or any area which is classified as a wet location.

6. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture

and no objects filled with liquids, such as vases, should be placed on this apparatus.

7. - Unplug the apparatus from the outlet before cleaning. Do not use liquid cleaners Clean only with dry cloth

or aerosol cleaners.

8. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions -

Openings in the enclosure, if any, are provided for ventilation and to ensure reliable operation of the apparatus

and to protect it from overheating. These openings must not be blocked or covered. This apparatus should not

be placed in a built-in installation unless proper ventilation is provided or the manufacturer’s instructions have

been adhered to.

9. Do not install near any heat sources such as radiators, heat registers, stoves, air ducts, or other appa

ratus (including amplifiers) that produce heat.

Shure Incorporated

2/12

10. Do not install the unit in a place exposed to direct sunlight, excessive dust or humidity, mechanical vi

bration or shock .

11. To avoid moisture condensations do not install the unit where the temperature may rise rapidly.

12. A polarized plug has two blades Do not defeat the safety purpose of the polarized or ground-type plug.

with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider

blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

13. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles,

and the point where they exit from the apparatus.

14. . Any mounting of the apparatus should Only use attachments/accessories specified by the manufacturer

follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufactur-

er.

15. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the ap

paratus.

When a cart is used, use caution when moving the cart/apparatus combination to avoid

injury from tip-over - Quick stops, excessive force, and uneven surfaces may cause the

appliance and cart combination to overturn.

16. Unplug this apparatus during lighting storms or when unused for long periods of time . – Not applicable

when special functions are to be maintained, such as evacuation systems.

17. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate

normally, or has been dropped.

18. Replacement Parts - When replacement parts are required, be sure the service technician has used replace-

ment parts specified by the manufacturer or having the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

19. Safety Check - Upon completion of any service or repairs to this apparatus, ask the service technician to per-

form safety checks to determine that the apparatus is in proper operating condition.

20. - Do not overload outlets and extension cords as this can result in a risk of fire or electric shock.Overloading

21. - This apparatus should be operated only from the type of power source indicated on the Power Sources

marking label. If you are not sure of the type of power supply you plan to use, consult your appliance dealer or

local power company. For apparatuses intended to operate from battery power, or other sources, refer to the

operating instructions.

22. - An outdoor system should not be located in the vicinity of overhead power lines or other electric Power Lines

light or power circuits, or where it can fall into such power lines or circuits. When installing an outdoor system,

extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be

fatal.

23. - Never push objects of any kind into this apparatus through openings as they may Object and Liquid Entry

touch dangerous voltage points or short-out parts that could result in a fire or electric shock.

Never spill liquid of any kind on the apparatus. Should any liquid or solid object fall into the cabinet, unplug the

unit and have it checked by qualified personnel before operating it further.

Shure Incorporated

3/12

Labels

“Lightning Flash Symbol” with the lightning flash with arrowhead symbol within an equilateral

triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage" with-

in the product enclosure that may be of sufficient magnitude to constitute a risk of shock to

persons.

“Exclamation Point Symbol” with the exclamation point within an equilateral triangle is intend-

ed to alert the user to the presence of important operating and maintenance (servicing) in-

structions in the literature accompanying the product.

Note for Power Connections

Check that the voltage of your local power supply is within the operating voltage of the unit. If a voltage conversion

is required, consult your DIS dealer or qualified personnel.

Set the Power switch to ‘Off’ if it is not used for several days.

Important: The equipment must be connected to earth (ground)

The wires in the main lead supplied with the equipment are colored in accordance with the following codes:

•Green-and-yellow Earth (Ground)

•Blue Neutral

•Brown Live

•The green-and-yellow wire must be connected to the terminal in the plug marked with the letter E or with the

safety earth symbol or marked with green-and-yellow color.

•The blue wire must be connected to the terminal marked with the letter N or marked with black color.

•The brown wire must be connected to the terminal marked with the letter L or marked with red color.

•For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.

Power Disconnect

Apparatuses with or without On/Off switches have power supplied to the apparatus whenever the power cord is in-

serted into the power source; however, the apparatus is operational only when the On/Off switch is in the On posi-

tion. The power cord is the main power disconnect for all apparatuses.

Compliance

The equipment is intended to be used in professional audio applications.

Note: This device is not intended to be connected directly to a public internet network.

EMC conformance to Environment E2: Commercial and Light Industrial. Testing is based on the use of supplied

and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC perfor-

mance.

Product specificaties

Merk:	Shure
Categorie:	Microfoon
Model:	BM6620
Kleur van het product:	Zwart
Breedte:	181.5 mm
Connectiviteitstechnologie:	Bedraad
Diameter:	19 mm
Certificering:	IEC 60914
Microphone direction type:	Omnidirectioneel
Frequentie microfoon:	40 - 18000 Hz
Microphone input impedance:	200 Ohm
Bedrijfstemperatuur (T-T):	5 - 40 °C
Aantal producten inbegrepen:	1 stuk(s)
Gewicht microfoon:	63 g
Microfoon Signal-to-Noise Ratio (SNR):	64 dB
Aanbevolen belastingsimpedantie:	600 Ohm
Microphone dynamic range:	112 dB
Microphone Total Harmonic Distortion (THD):	1.5 procent