Shure 545SD Handleiding

Shure Microfoon 545SD

Lees hieronder de 📖 handleiding in het Nederlandse voor Shure 545SD (5 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/5
1/5
545SD -- Vocal Microphone
General Description
The Model 545SD is a dual-impedance, unidirec-
tional, dynamic microphone. Shipped connected
for low-impedance operation, it features a silent
magnetic reed on/off switch.
The Classic Unidyne is a favorite for instrument
pickup and recording,and can be used on
lecterns for public address systems such as
those used in political conventions and legisla-
tures, convention halls, hotels, public auditori-
ums, stadiums, schools, and churches.
Features
•Exceptionally uniform cardioid pattern minimizes feedback in PA applications
•Selectable dual-impedance operation
•Silent magnetic reed on/off switch with lock option
•Cardioid dynamic
•Frequency response: 50 to 15,000 Hz
Connections
When using the microphone with a balanced input, pins 2 and 3 are the audio signal carriers. When using the mi
crophone with an unbalanced input, use a cable wired with pin 2 as the signal carrier and pin 3 connected to the
cable shield (ground), such as the Shure C20AHZ high-impedance cable.
Shure Incorporated
2/5
Impedance Selection
The microphone is shipped connected for low impedance operation. To change to high impedance, proceed as fol
lows:
1. Remove plug element at receptacle end of microphone by turning slotted setscrew in (counterclockwise) and
carefully withdrawing plug element from case.
2. Disconnect 2-terminal impedance selection socket from rear of plug element.
3. Reconnect 2-terminal impedance selection socket in reverse position so that pin 3 of plug element is inserted
in socket terminal "H" (White).
4. Reassemble plug element into microphone and seal setscrew securely by turning out (clockwise).
IMPEDANCE SELECTION RECEPTACLE END OF MICROPHONE
Polarity
All cables and microphones should be tested to ensure that they have the same polarity. To test two microphones
and/or their cables for proper polarity, connect them to an amplifier and talk or sing into them while holding them
three or four inches apart. The sound from the speakers should be the same when talking into either microphone
or directly between them. If the sound drops drastically, or if a dead spot is found when talking between the two mi
crophones, either the microphones or their cables have opposite polarity.
To change the polarity of a microphone cable, either use a Shure A15PRS phase reverser or interchange the wires
connected to pins 2 and 3 of the threepin connector at one end of the cable. To change the polarity of a micro
phone, the microphone cartridge leads must be interchanged. This should be performed by your dealer, the Shure
Factory Service Department, or other qualified service personnel.
Specifications
Type
Dynamic (moving coil)
Frequency Response
50 to 15,000 Hz
Shure Incorporated
3/5
Impedance
Dual. Microphone rating impedance is 150 ohms (250 ohms actual) for connection to microphone inputs rated at
19 to 300 ohms and 'High' for connection to highimpedance microphone inputs. Wired for low impedance as sup
plied. To change impedance, see sections on Impedance Selection and Connections.
Output Level
Open Circuit Voltage , at 1kHz
L -58.0 (1.3 dB mV
H -35.0 (17.6 dB mV
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Switch
Built-in magnetic reed on/off switch with lockplate. To lock switch in the ON position, remove screw on lockplate
and turn lockplate 180°. Reassemble and tighten screw.
Cartridge Shock Mount
Internal rubber vibration isolator
Swivel Adapter
Positive action, adjustable through 90° from vertical to horizontal, permits easy removal for handheld use, suitable
for mounting on stand with 5/8 in.-27 thread
Housing
Chrome-plated die casting with ARMO-DUR grille and stainless steel screen
Net Weight
less cable
255 (9oz.) g
[1]

Product specificaties

Merk: Shure
Categorie: Microfoon
Model: 545SD

Heb je hulp nodig?

Als je hulp nodig hebt met Shure 545SD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Microfoon Shure

Shure

Shure MXA901-R Handleiding

23 Augustus 2024
Shure

Shure SBC-DC-903 Handleiding

28 Mei 2024
Shure

Shure AXT910 Handleiding

17 April 2024
Shure

Shure ADX3 Handleiding

17 April 2024
Shure

Shure SM7dB Handleiding

15 November 2023
Shure

Shure MX412SE/C Handleiding

5 Juli 2023
Shure

Shure SLXD24/SM86 Handleiding

4 Juli 2023
Shure

Shure SBC10-904 Handleiding

3 Juli 2023
Shure

Shure PG27 Handleiding

1 Juli 2023
Shure

Shure TH53 Handleiding

1 Juli 2023

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon

Elgato

Elgato Wave Neo Handleiding

11 September 2024
Røde

Røde XDM-100 Handleiding

6 September 2024
Røde

Røde Wireless PRO Handleiding

6 September 2024
Røde

Røde PodMic USB Handleiding

6 September 2024
Valcom

Valcom V-400 Handleiding

5 September 2024
Valcom

Valcom V-9934 Handleiding

5 September 2024
Valcom

Valcom SBS-400 Handleiding

5 September 2024
Valcom

Valcom V-420 Handleiding

5 September 2024
Røde

Røde Interview PRO Handleiding

4 September 2024
Røde

Røde XCM-50 Handleiding

4 September 2024