Shindaiwa 452s Handleiding

Shindaiwa Zaagmachine 452s

Lees hieronder de 📖 handleiding in het Nederlandse voor Shindaiwa 452s (80 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 71 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/80

• Read this manual and familiarize yourself with its contents.

• This machine is designed for cutting wood and timber.

Use only for designated purpose.

• Minimize the risk of injury to yourself and others.

• Always wear eye protection when operating this machine.

• Do not operate or service this machine unless you clearly understand this manual.

• Keep this manual available at all times so that you can reference it whenever you

have a question about the use of this unit.

WARNING!

SHINDAIWA OWNER’S/OPERATOR’S MANUAL

446s CHAIN SAW

452s CHAIN SAW

Part Number 69025-94313 Rev. 1/07

English...................1

French.............FR_1

Italian...............IT_1

German...........DE_1

Attention Statements

Read and follow the Operator’s

Manual. Failure to do so could

result in serious injury.

Beware of Kickback! Kickback

can occur whenever the tip of the

guide bar touches an object while

the saw is operating. Kickback

may force the bar up and back

toward the operator with a

lightning-fast reaction!

Wear eye and hearing protection

at all times during the operation

of this unit.

Sound Power Level

(measured in accordance with

2000/14/EC).

All chain saw service, other than the

items listed in the owner’s manual

maintenance instructions, should be

performed by trained Shindaiwa chain

saw service personnel. (For example, if

improper tools are used to remove the

ywheel, or if an improper tool is used to

hold the ywheel in order to remove the

clutch, structural damage to the ywheel

could occur and could subsequently

cause the ywheel to burst.)

Throughout this manual are special

“Attention Statements”.

CAUTION!

A statement preceded by the word

“CAUTION” contains information

that should be acted upon to prevent

mechanical damage.

WARNING!

A statement preceded by the

triangular attention symbol

and the word “WARNING” contains

information that should be acted

upon to prevent serious bodily injury.

NOTE:

A statement preceded by the word

“NOTE” contains information that is handy

to know and may make your job easier.

IMPORTANT!

A statement preceded by the word

“IMPORTANT” is one that possesses

special signicance.

Introductions

The Shindaiwa 446s/452s chain saw is

designed and built to deliver superior

performance and reliability without

compromise to quality, comfort,

safety, or durability. Shindaiwa high

performance engines represent

the leading edge of 2-cycle engine

technology, and deliver exceptionally

high power at remarkably low

displacement and weight. As a

professional owner/operator, you’ll soon

discover why Shindaiwa is simply in a

class by itself.

IMPORTANT!

The information contained in this

manual describes units available at the

time of production. While every attempt

has been made to give you the very

latest information about your Shindaiwa

446s/452s chain saw, there may be

some diﬀerences between your saw

and what is described here. Shindaiwa

Inc. reserves the right to make changes

in production without prior notice, and

without obligation to make alterations to

units previously manufactured.

PAGE

Contents

Attention Statements ........................... 2

Labels and Symbols ............................. 5

Unit Description ................................... 6

Technical Speciﬁcations ...................... 6

Installing and Adjusting the

Guide Bar and Saw Chain ................... 7

Mixing/Filling Fuel ............................. 8

Bar Oil ................................................... 8

Starting the Engine .............................. 9

Stopping the Engine .......................... 10

Carburetor Adjustments .................... 10

Chain Brake ........................................ 11

Cutting with the Saw .......................... 12

Maintenance ....................................... 14

Saw Chain Performance .................... 16

Troubleshooting ................................. 17

Declaration of Conformity ................. 19

IMPORTANT!

Kickback Safety

WARNING!

Kickback

can happen

lightning-fast!

This saw is equipped with the following

safety equipment:

1. Inertia chain brake.

Activating the chain brake tightens

a brake band around the chain drive

mechanism, stopping all chain

rotation. When sudden kickback

occurs, the chain break is automati-

cally actuated and the chain stops

instantly. The chain brake can also be

activated manually.

WARNING!

To reduce the risk of

kickback, all of the above

devices must be properly installed

and in good repair!

WARNING!

Brake engagement and

operation depend upon

proper chain break condition! For

proper chain brake testing and

adjustment procedures, refer to

Page 11.

Either of the following reactions could

cause you to lose control of your saw

while cutting, possibly resulting in

serious injury!

1. Kickback can occur whenever the

guide bar nose or tip contact an object

while the saw is running. Tip contact

may cause the guide bar to kick

upward and back toward the operator

with a lightning-fast reaction!

2. Pinching the saw along the top of the

guide bar may push the guide bar

rapidly back toward the operator!

Pinching can occur whenever wood

closes in around the moving chain!

Do not rely exclusively on the safety

devices incorporated with your saw. As a

chain saw user, observing the following

steps will also help you to avoid accident

or injury on the job:

Kickback Safety Precautions

n Grip the saw ﬁrmly with your right

hand on the rear handle and your left

hand on the front handle, thumbs

and ﬁngers encircling the handles

whenever the saw is running. Don’t

let go: A ﬁrm grip will help you to

reduce kickback while maintaining

control of the saw.

n Accelerate the saw before the

chain contacts the work area, and

always maintain high engine speeds

throughout the cut.

n Sudden surprise can contribute to ac-

cidents! With a basic understanding of

kickback, you can reduce or eliminate

the element of surprise.

n Clear obstructions from the work

area before cutting. Remove any log,

branch, or other obstruction that

might contact the guide bar tip during

cutting operations.

n Do not overreach or attempt to cut

above shoulder height.

n Follow the manufacturer’s

instructions for sharpening and

maintenance of the saw chain.

n Use only the replacement bar and

chain combinations speciﬁed by the

manufacturer.

n Never stand directly over the saw

while cutting!

n Use low-kickback chain, chain brakes,

or special guide bars to reduce the

risk of kickback.

Product specificaties

Merk:	Shindaiwa
Categorie:	Zaagmachine
Model:	452s

Heb je hulp nodig?

Als je hulp nodig hebt met Shindaiwa 452s stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Zaagmachine Shindaiwa

Shindaiwa 269TS Handleiding

19 November 2024

Shindaiwa 320TS Handleiding

19 November 2024

Shindaiwa 488 Handleiding

19 November 2024

Shindaiwa 352s Handleiding

19 November 2024

Shindaiwa 452s Handleiding

7 Februari 2024

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Ergotools Pattfield E-PST 800 L Handleiding

19 November 2024

Bavaria By Einhell Bavaria BFS 600 E Handleiding

19 November 2024

Bavaria By Einhell Bavaria BSTL 800 Profi Handleiding

19 November 2024

Proviel STL 800 Handleiding

19 November 2024

Proviel PVBK 40 Handleiding

19 November 2024

Proviel PVKS 38/40 B Handleiding

19 November 2024

Proviel HPSL 750 Handleiding

19 November 2024

Proviel HHKL 1400 Handleiding

19 November 2024

Prowork PBS 1835 Handleiding

19 November 2024

Bavaria By Einhell Bavaria BMP 440 Handleiding

19 November 2024