Shark Powered Lift-Away ZU881 Handleiding

Shark Stofzuiger Powered Lift-Away ZU881

Lees hieronder de 📖 handleiding in het Nederlandse voor Shark Powered Lift-Away ZU881 (4 pagina's) in de categorie Stofzuiger. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
ZU881_QSG_REV_Mv3
For questions or to register your product, visit us online at sharkclean.com
@sharkcleaning
MAINTENANCE
Empty dust cup after each use
ZU881
Please be sure to read the enclosed Shark® Owners Guide prior to using your unit.
QUICK
START
GUIDE
Use this Quick Start Guide
to learn about your new
vacuum’s great features.
Register your vacuum at
registeryourshark.com
For additional parts
and accessories, visit
sharkaccessories.com
Empty
Release
Filter Maintenance
To keep suction strong, rinse
the filters with water only and
allow them to air-dry completely
before reinstalling them. Tap
loosedirt from filters asneeded
between washes.
See enclosed Owners Guide for
complete details on removing
and cleaning filters.
©2019 SharkNinja Operating LLC. DUOCLEAN, LIFT-AWAY, POWERED LIFT-AWAY, ZERO-M
and SHARK are registered trademarks of SharkNinja Operating LLC.
Zero-M Technology
The Zero-M Self-Cleaning Brushroll delivers nonstop hair removal. To clear any blockages,
see instructions below.
Cleaning the Brushroll
1. To open the brushroll garage, slide
both release buttons on the floor
nozzle away from you, towards the
back of the nozzle, then lift o the lid.
2. Clear away any objects or debris.
3. To close the brushroll garage, insert the
3 tabs on top of the lid into the 3 slots
in the nozzle, then push down on both
sides of the lid until it clicks securely
into place. If the Brushroll Indicator
Light isn’t green and the headlights are
flashing, check again that both sides of
the lid are locked in place.
Brushroll Maintenance
Carefully remove any
debris that may be
impeding the brushroll.
Cleaning the Soft Roller
Lift out the Soft Roller by pulling the tab
on the right side. Clear away any debris,
then slide the Soft Roller back into place.
Checking the Nozzle for Blockages
Tilt the neck of the nozzle back to straighten
the airway, then remove any blockages.
POWERED
LIFT-AWAY
®
VERSATILE FLOOR-TO-CEILING CLEANING
A
B
C
D
E
ASSEMBLY
2
(Click)
1
(Click)
3
(Click)
4
(Click)
WHATS INSIDE:
UPRIGHT MODE POWERED LIFT-AWAY® MODE
ABOVE-FLOOR CLEANING IN LIFT-AWAY MODE
Use for carpet and hard-floor cleaning
Attach desired cleaning accessory
to wand or handle.
1. Insert wand intooor nozzle.
2. Insert handle into wand.
3. Place pod onto wand.
Slide down to connect.
4. Press hose into back of pod.
Use for portable cleaning
on stairs or above-floor areas
Wand
Release
Wand
Re lea se
Handle
Release
Handle
Floor Type
Power Button
Place foot on floor nozzle andtilt handle back.
Choose appropriate floor setting and press power button.
Lift-Away
Release
Wand
Release
Wand
Rele a se
Press Lift-Away Release button to lift
pod ofloor nozzle. You are now ready
to clean those hard-to-reach places.
For complete instructions, see the enclosed Owner's Guide.
For additional parts and accessories, visit sharkaccessories.com
A Handle
B Hose
C Vacuum Pod
D Wand
E Motorized Floor Nozzle
F Pet Multi-Tool
G 12" Crevice Tool
F G
Attach any of the
specialized cleaning
accessories to the
handle or wand.


Product specificaties

Merk: Shark
Categorie: Stofzuiger
Model: Powered Lift-Away ZU881

Heb je hulp nodig?

Als je hulp nodig hebt met Shark Powered Lift-Away ZU881 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Stofzuiger Shark

Handleiding Stofzuiger

Nieuwste handleidingen voor Stofzuiger