Sevenoak SK-R6 Handleiding
Lees hieronder de š handleiding in het Nederlandse voor Sevenoak SK-R6 (1 pagina's) in de categorie Statief. Deze handleiding was nuttig voor 65 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/1
SK-R01
Shoulder
Support Rig
The SK-R01 Shoulder Support Video Stabilizer is a support that
features two-point Stabilization using a shoulder mount and a
hand grip.
Thank you for choosing Sevenoak and congratulations on your
Purchase of the Sevenoak SK-R01 Shoulder Support Rig.
The Sevenoak Shoulder Support Rig is a compact camera
stabilization rig that uses a comfortable foam padded shoulder
pad mount and a hand grip to help you support your camera
and keep it steady when shooting video.The SK-R01 reduces
muscle fatigue,while eliminating distracting camera move
-ment for smoother,more professional-looking movies.It can
support cameras weighing up to 5.5 pounds.
The SK-R01 is height-adjustable and can be used on the left
or the right shoulder,with a hand grip thatās detachable and
can be used as a stand-alone support for lightweight cameras.
The SK-R01 weighs just 2.25 pounds.
4. Mount the hand grip to the shoulder mount frame by
screwing the end of the hand grip into the hole provided
at the end of the camera baseplate.Align the hand grip
correctly to the hole,which is angled slightly.Tighten the
hand grip securely.
7. Adjust the distance of the camera from your eye by loosening
the baeplate mounting screw slightly and sliding the camera
forward or back to the desired position.Tighten the screw
securely. Do not overtighten.
8. To adjust the vertical position of the camera,loosen the
shoulder mount frame mounting plate screw and slide the
shoulder mount frame up or down to the desired position.
Tighten the screw securely.Do not overtighten.
When youāre ļ¬nished shooting,remove the camera from the
shoulder mount.
Slots on end of the shoulder pad may be used for additional
accessories such as counterweights and shoulder straps.
5. Screw the camera mounting screw into the camera baseplate
using one of the holes provided.
6. Attach the camera to the baseplate using the camera
mounting screw.Tighten securely.
1. Install the shoulder pad mounting plate on to the shoulder
pad using the two included Allen screws and the included
Allen wrench.If the Sk-R01 will be on the right shoulder,place
the plate so that the long part of the plate extends to the
right of the screws.If the left shoulder will be holding the
support,the long part of the plate should extend to the left
of the screws.
2. Attach the shoulder mount frame to the shoulder pad using
the shoulder mount frame mounting plate and the included
shoulder mount frame mounting plate screw.With the screw
in place,you can adjust the vertical height of the rig by
loosening the screw slightly and moving the shoulder mount
frame up or down until itās at desired height.Then tighten the
mounting screw securely.Do not overtighten.
3. Attach the camera baseplate to the shoulder mount frame
using the baseplate mounting plate and the baseplate
mounting plate screw.After the baseplate is munted to the
shoulder mount frame,you can adjust the baseplate by
loosening the screw and sliding the baseplate forwards or
back.When the baseplate is in the correct position,tighten
the mounting screw securely.Do not overtighten.
Please read and follow these instructions,and keep this
manual in a safe place.
Handle the unit with care.
Clean the unit with a soft,dry cloth.
Use only parts provided by the manufacturer.
Make sure everything is secure before proceeding.
Make sure the item is intact and that there are no missing parts.
Do not exceed the maximum load capacity.
All photos are for illustrative purposes only.
Hand grip may be used as a
standalone grip for smaller
cameras.
Threaded holes in camera
baseplate may be used to
mount accesories with the
use of brackets.
Removable hand grip
Foam shoulder pad
Stainless steel shoulder mount frame
Camera baseplate
Camera mounting screw
Shoulder pad mounting plate with two
Allen screws (+1 spare)
Allen wrench
Mounting the camera
Components
Warnings
Shoulder mount frame mounting plate
with one screw
Baseplate mounting plate with one screw
Limited one-year Warranty
Sevenoak provides a limited warranty that this product is free
from defects in materials and workmanship to the original
purchaser under normal use for a period of one (1) year from
the original purchase date or thirty(30) days after replace-ment
(theāWarranty Periodā),Whichever occurs later.Our responsibility
with respect to this limited warranty shall be limited solely to
repair or replacement,at its option,of any product which fails
during normal consumer use.
To obtain warranty coverage during the Warranty Period,
contact your place of purchase(āSellerā) to obtain a return
merchandise authorization(āRMAā) number,and return to
Seller the defective Product along with proof of purchase and
the RMA number.
This warranty does not extend to damage or failure which
results from misuse,neglect,accident,alteration,abuse,improper
installation or mainterance.EXCEPT AS PROVIDED HEREIN,
SEVENOAK MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY
IMPLIED WARRANTIES,INCLUDING BUT NOT LIMITED TO ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.This warranty provides you with speciļ¬c
legal rights,and you may also have additional rights which vary
from state to state.
2017 Sevenoak Inc.Visit us on the
web at www.sevenoak.biz
2017 Sevenoak Inc.Visit us on the
web at www.sevenoak.biz
Product specificaties
| Merk: | Sevenoak |
| Categorie: | Statief |
| Model: | SK-R6 |
Heb je hulp nodig?
Als je hulp nodig hebt met Sevenoak SK-R6 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Statief Sevenoak
14 Mei 2023
7 Mei 2023
4 Mei 2023
20 Maart 2023
12 Februari 2023
25 Januari 2023
Handleiding Statief
- Statief Braun
- Statief Sony
- Statief Alpine
- Statief Aukey
- Statief Bresser
- Statief DJI
- Statief Dorr
- Statief Drift
- Statief Easypix
- Statief GoPro
- Statief Hama
- Statief Kodak
- Statief Kogan
- Statief Konig
- Statief Laserliner
- Statief Livoo
- Statief Neewer
- Statief Pyle
- Statief Ravelli
- Statief Revo
- Statief Rollei
- Statief Silvercrest
- Statief Sunpak
- Statief Trust
- Statief Vanguard
- Statief Velbon
- Statief Velleman
- Statief Vortex
- Statief Winegard
- Statief Barska
- Statief Miller
- Statief Celestron
- Statief Levenhuk
- Statief Kessler
- Statief Eurolite
- Statief ARRI
- Statief JOBY
- Statief Vello
- Statief Swarovski
- Statief Testo
- Statief Carson
- Statief Benro
- Statief Magnus
- Statief Manfrotto
- Statief Sachtler
- Statief Zhiyun
- Statief AVerMedia
- Statief MOZA
- Statief Cullmann
- Statief Stalco
- Statief GVM
- Statief Marshall Electronics
- Statief Rode
- Statief Slik
- Statief Celly
- Statief Gitzo
- Statief Proaim
- Statief Konig & Meyer
- Statief Ultimate Support
- Statief Oben
- Statief Glide Gear
- Statief Camgear
- Statief Libec
- Statief Redrock Micro
- Statief Auray
- Statief Ulanzi
- Statief Flycam
- Statief Gravity
- Statief Sirui
- Statief Vinten
- Statief Acratech
- Statief ProMediaGear
- Statief Fidlock
- Statief Mantona
- Statief Olloclip
- Statief IFootage
- Statief SmallRig
- Statief FeiYu-Tech
- Statief FeiyuTech
- Statief Sky-Watcher
- Statief Hohem
- Statief MOVE'N SEE
- Statief On Air
- Statief Kaiser Fototechnik
- Statief Slidekamera
- Statief IOptron
- Statief FLOWCINE
- Statief SteadiCam
- Statief Fat Gecko
- Statief 3 Legged Thing
- Statief FLM
- Statief Peak Design
- Statief Easyrig
- Statief Robus
- Statief Studio Assets
- Statief Square Jellyfish
- Statief Tiltall
- Statief E-Image
Nieuwste handleidingen voor Statief
20 November 2024
19 November 2024
19 November 2024
19 November 2024
19 November 2024
19 November 2024
19 November 2024
19 November 2024
19 November 2024
19 November 2024