SereneLife SLSBXN850GY Handleiding
SereneLife
No categorizado
SLSBXN850GY
Lees hieronder de 📖 handleiding in het Nederlandse voor SereneLife SLSBXN850GY (2 pagina's) in de categorie No categorizado. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
www.SereneLifeHome.com
ASSEMBLY INSTRUCTIONS & LAYOUT
Please Note:
• Be sure to check the letters marked on the sides of the bin and align as shown in the images for proper orientation.
• Reference the images on the corresponding page.
1. Lay the rear panel down and start by adding in the side plates.
• First insert the left panel (B) into the rear panel (F), press the rear panel (F) down to secure the left panel (B)
• Then insert the right panel (C) into the rear panel (F), press the rear panel (F) down to secure the right panel (C)
2. Now add the base plate (D)
• First place the base plate (D) on the cushion to avoid scratches, then insert the 4 base pads (L) into the base plate (D).
• Then insert the assembled cabinet down into the slot corresponding to the base panel (D).
3. Finally we add the screws (H)
• First add screws to secure the side panel (B, C, E, F) to the base plate (D), then add screws in the corners to secure the
side panels (B, C, E, F).
• Then align the hinge of the lid and attach with 2 screws on each side.
Box lid
Rear panel
Left panel
Right panel
Front panel
Base plate
12
Questions? Comments?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
www.SereneLifeHome.com
HOW TO SET A CUSTOM PASS CODE:
1. Adjust the pin to your current pass code (By default, the lock pin is set to “0000”).
2. Completely remove the top drawer from the cabinet and on the inside of the cabinet switch the lever located on the lock
from the B to A position.
3. While lever is in A position - set the desired new code. Make sure the 4 dials you set are exactly parallel and lined up -
you don’t want to set to the wrong number by mistake. (Sample below).
4. Once your new pass code is entered, change the lever back from A to the B position.
5. Make sure to write down & remember your code.
There is no way to recover it once it is set.
3 4
0 0 0
A
B
A
B
A
B
A
B
1 2 3
3
1
2
Product specificaties
| Merk: | SereneLife |
| Categorie: | No categorizado |
| Model: | SLSBXN850GY |
Heb je hulp nodig?
Als je hulp nodig hebt met SereneLife SLSBXN850GY stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding No categorizado SereneLife
6 Juli 2023
Handleiding No categorizado
- No categorizado Samsung
- No categorizado EverFocus
- No categorizado FireKing
- No categorizado Furuno
- No categorizado Generac
- No categorizado GoPro
- No categorizado Graco
- No categorizado Hager
- No categorizado Hayward
- No categorizado Kenmore
- No categorizado Klarstein
- No categorizado Kupper
- No categorizado Liftmaster
- No categorizado Martin
- No categorizado Mitsubishi
- No categorizado New Pol
- No categorizado RCA
- No categorizado VAX
- No categorizado Velbus
- No categorizado Xlyne
- No categorizado Carmen
- No categorizado Playtive Junior
- No categorizado EMOS
- No categorizado Nevir
- No categorizado Cherry
- No categorizado Scosche
- No categorizado Vello
- No categorizado Harley Benton
- No categorizado IFM
- No categorizado Adj
- No categorizado Metra
- No categorizado CRUX
- No categorizado MyPhone
- No categorizado PAC
- No categorizado Vimar
- No categorizado Panduit
- No categorizado Röhm
- No categorizado Lincoln Electric
- No categorizado Microchip
- No categorizado FED
- No categorizado HomePilot
Nieuwste handleidingen voor No categorizado
7 Juli 2023
6 Juli 2023
6 Juli 2023
5 Juli 2023
4 Juli 2023
3 Juli 2023
2 Juli 2023
30 Juni 2023
29 Juni 2023
29 Juni 2023