SereneLife IPCAMHD15 Handleiding

SereneLife Bewakingscamera IPCAMHD15

Lees hieronder de 📖 handleiding in het Nederlandse voor SereneLife IPCAMHD15 (3 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/3
1 2 3
www.SereneLifeHome.com
Safety Instruction
These instructions are intended to ensure that user can
use the product correctly to avoid danger or property loss.
Warnings
1. Proper conguration of all passwords and other security settings
is the responsibility of the installer and end user.
2. In the use of the product, you must be in strict compliance with
the electrical safety regulations of the nation and region.
Please refer to technical specications for detailed information.
3. Input voltage should meet both the SELV (Safety Extra Low
Voltage) and the Limited Power Source with 100 to 240 VAC or 5
VDC according to the IEC60950-1 standard. Please refer to
technical specications for detailed information.
4. Do not connect several devices to one power adapter as adapter
overload may cause overheating or a re hazard.
5. Please make sure that the plug is rmly connected to the power
socket.
6. If smoke, odor or noise rise from the device, turn o the power
at once and unplug the power cable, and then please contact
the service center.
www.SereneLifeHome.com
1. Install "MIPC" APP
Method I: Download APP in: www.mipcm.com/download;
Method II: Scan to Download:
Method III: MIPC Download " " APP from APP Store (iOS) or
Play Store (Android).
2. Register an Account
Open " " APP, click " " button, register & log in as MIPC register
instructed (For your account safety & retrive password,
we suggest you to bind with email before log in).
www.SereneLifeHome.com
3. Add Camera
Click on " " in top left corner, choose " " + PTZ cameras
(FIX/Cloud box/ Panoramic), scan the QR code on bottom of the
camera, and tap the " " button to enter the network Add
connection interface.
4. Select Network Connection
You could choose either " " or Sound connection
" " to connect the camera.Ethernet connection
Note:
1. Press for 1 second to enter Wi-Fi conguration; press for RESET
10 seconds or longer to restore to factory settings (when you
hear a chime, then setting successfully).
2. Try "Ethernet connection Sound connection" if " " unsuccessful.
www.SereneLifeHome.com
Option 1: Sound connection
a. Click the " " icon, setting up Wi-Fi for cameraSound connection
(only support 2.4GHZ), input the Wi-Fi password;
b. Power on the device (30-60 seconds after you connect the power,
you will hear the chime and the IR light will turn o,
now camera is powered on);
c. Already heard the voice hint1. Click the " " if you hear the
chime, and wait until successfully connected.
2. If no chime heard, please press the button for 1 second,RESET
you will hear the voice prompt say "Waiting for receiving
the wireless conguration", click "Already heard the
voice hint", and wait until successfully connected.
Prompt: Our APP will be in continuously update for better users
experience. The actual operation interface may not accordance
with this manual, please operate according to APP.
5 6 74
Questions? Comments?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
www.SereneLifeHome.com
Option 2: Ethernet connection
a. Ethernet connection Click the " " icon;
b. Power on the device, connect the camera to router with
Ethernet cable (camera will be powered on in 30-60 seconds);
c. Add the matched device until set up successfully.
www.SereneLifeHome.com
FAQ
1. What if the camera cannot connect to Wi-Fi?
• Check if your Wi-Fi password contains special characters such
as spaces, commas, periods, etc, which may not be recognized
by the camera.
• The camera is only available to 2.4GHz Wi-Fi, not 5GHz Wi-Fi.
Please check and see your Wi-Fi frequency band of the router.
• Keep your mobile phone as close to the camera as possible,
and keep your camera as close to the router as possible.
• Poor Wi-Fi signal may result in failure to connect to your camera.
You can use a Wi-Fi Range Extender which will extend the Wi-Fi
signal and wireless coverage of existing wireless networks.
www.SereneLifeHome.com
• If you have an Ethernet cable at home, please try to set up the
camera with it, then follow the directions on the APP to change
into a Wi-Fi network.
If you fail to connect the camera, please follow these •
steps and try again:
Remove power cord. Then, re-plug it in.1.
Press and hold the button for over 10 seconds to 2. RESET
restore the camera to factory settings when you hear the
voice prompt and the IR light turns on.
3. Set up the camera once more when you hear the voice prompt.
2. APP can't receive the alarm notication?
• The camera has motion detection and alarm function, but it
needs manual setup. Enter the camera "Steps: settings",
select " ", enable the motion detection feature Notications
and save the settings.
www.SereneLifeHome.com
3. What if I forget my account & password?
• You can nd your account & password with the binding email,
it will not be found if not binding with email.
4. How can I see the recorded video?
• For your privacy and security, video les are encrypted, it must
be playback through mobile phone APP or computer APP, and
it cannot be played directly on the computer, you need to export
the video through SDtool, a special video export tool.
The SDtool can be downloaded from www.mipcm.com.
5. How does the camera restore to factory settings?
• Press and hold the button for 10 seconds, you will hear RESET
the voice prompt "Restore the factory settings successfully",
now camera starting to restore, it will nish about 60 seconds,
then you will hear a chime (Do not power o during restore
procedures).

Product specificaties

Merk: SereneLife
Categorie: Bewakingscamera
Model: IPCAMHD15

Heb je hulp nodig?

Als je hulp nodig hebt met SereneLife IPCAMHD15 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Bewakingscamera SereneLife

SereneLife

SereneLife IPCAMHD82EU Handleiding

6 Juli 2023
SereneLife

SereneLife IPCAMHD15 Handleiding

27 Juni 2023
SereneLife

SereneLife IPCAMHD80 Handleiding

26 Juni 2023

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera

Honeywell

Honeywell HC35WE5R3 Handleiding

20 December 2024
Honeywell

Honeywell Performance H4W8PER2V Handleiding

20 December 2024
Hikvision

Hikvision DS-2CE12KF3T-LS Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE78D0T-LXTS/A Handleiding

18 December 2024
TP Link

TP Link VIGI C450 Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE76U0T-LPF Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE78U0T-LF Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE16U0T-LPF Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE72KF3T-LSYE Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE17U0T-LF Handleiding

18 December 2024