SentrySafe SFW123BUC Handleiding
SentrySafe
Kluis
SFW123BUC
Lees hieronder de 📖 handleiding in het Nederlandse voor SentrySafe SFW123BUC (12 pagina's) in de categorie Kluis. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/12
: SentrySafe.com
: 1-800-828-1438
Water/Fire-Resistant Digital Safe with Fingerprint Scanner
Coffre-fort numérique avec lecteur d’empreintes digitales résistant
à l’eau et aux incendies
Caja fuerte digital impermeable/ignífuga con escáner de huellas digitales
Your SentrySafe Product
Your SentrySafe product has a number of features to keep your
important documents and valuables protected including:
Water Protection UL Classified
Fire Protection
Digital Media
Protection
Preparing Your Safe for First Time Use
1
2
Slide out the battery drawer on the side
of the keypad. Insert 4 AAA alkaline
batteries (not included). DO NOT use
rechargeable batteries or any other
type of non-alkaline battery.
Do not mix old and new batteries.
Do not mix alkaline and standard batteries.
Slide battery drawer back into keypad until it clicks into place.
Using Your Safe
Enter the 5 digit factory code found on the back of this
owner’s manual.
Turn handle downward to open safe.
IMPORTANT: Test your code several times before putting
valuables inside.
IMPORTANT: If you exert too much force on the handle,
the handle will move without moving the bolts. When this
happens, you will hear a ’click.’ DO NOT be alarmed.
This feature is designed to protect the bolts from being
overpowered by force. Simply exert force in the opposite
direction (lifting up) until the handle clicks back
into place.
Thank you for choosing SentrySafe to store all your important documents and valuables.
We hope that this product will help you stay organized and provide you with the peace-of-mind of knowing the things most important to you are protected.
Water/Fire-Resistant Digital Safe with Fingerprint Scanner
3
4
Using Your SentrySafe
The digital lock on your safe comes with two flexible solutions
for entry: a digital keypad and fingerprint scanner. You will
be able to program two 5 digit codes in addition to the factory
code found on the back of this owner’s manual. The fingerprint
scanner can also be programmed for up to two users, with two
fingerprints per user.
NOTE: To add or delete a secondary user s fingerprint, you must ’
have previously programmed a 5 digit primary user code.
NOTE: Factory code cannot be deleted.
Programming Digital
Keypad Entry
NOTE: Green light will blink to indicate the safe is in
program mode.
To Add a Primary User Code
Only 1 primary user code can be programmed at a time.
1
2
Press: “ ”P
Enter the 5 digit “FACTORY CODE”
(found on the back of this owner’s manual).
Press a 5 digit primary user code you have
chosen for your safe
3
Deleting a Primary User Code
1
2
Press: “ ”P
Enter the 5 digit “FACTORY CODE”
(found on the back of this owner’s manual).
Press: “ ” –“ ” –“ ” –“ ” –“ ”00000
NOTE: The electronic lock will NOT indicate that it has
deleted the user code—please test code to make sure it
has been deleted.
NOTE: A primary user code is necessary to adding/deleting
a secondary user code/fingerprint.
3
Programming the Secondary Code
Only 1 secondary user code can be programmed at a time.
1
2
Press: “ ”P
Enter your programmed 5 digit primary user code.
Press a personal 5 digit secondary user code.
3
1
2
Press: “ ”P
Enter your programmed 5 digit primary user code.
Press: “ ” –“ ” –“ ” –“ ” –“ ”00000
NOTE: The electronic lock will NOT indicate that it has
deleted the user code—please test code to make sure it
has been deleted.
3
Deleting a Secondary Code
Deleting a Primary Fingerprint User
1
2
Press: “ ”P
Enter the 5 digit “FACTORY CODE”
(found on the back of this owner’s manual).
Swipe any fingerprint once.
Press: “ ”C
NOTE: The electronic lock will NOT indicate that it has
deleted the user’s fingerprint—please test to make sure
it has been deleted.
NOTE: This will delete both fingerprints for this user.
3
4
Programming Your
Fingerprint Scanner
NOTE: Green light will blink to indicate
the safe is in program mode.
NOTE: Each user will have the ability
to program two fingerprints.
NOTE: Turning the keypad sound off
may make it more difficult to use
fingerprint scanner as a single beep
indicates your finger has been scanned.
To Add a Primary Fingerprint User
1
2
Press: “ ”P
Enter the 5 digit “FACTORY CODE”
(found on the back of this owner’s manual).
NOTE: Blue light will blink to indicate the fingerprint
sensor is ready to scan a new fingerprint.
Swipe the first finger 5-10 times.
Between each finger swipe you should hear a single beep
to indicate the fingerprint was scanned.
When the safe has registered the first fingerprint the green
indicator light will blink 3 times and you will hear
3 beeps.
To register a second fingerprint for this user – immediately
repeat steps 3 & 4 with a second finger for this user.
-OR-
If you would like to program only one finger
press “C”.
3
4
5
• Do not choose a finger with a cut or scar.
• Make sure hands are clean and dry before programming or
operating the fingerprint scanner.
• For optimal performance, clean the fingerprint sensor periodically
with a dry, lint-free cloth.
• The fingerprint sensor may not work well when cold.
Your Digital
Fingerprint Lock
Tips for Using Your
Fingerprint Scanner
Dual Key Lock
IMPORTANT: A dual key lock option is included
in your safe. Using this key can disable/enable
entry into the safe. This is NOT an override key.
Key must be in horizontal position to access safe.
English
Safe Warnings and
Important Information
• DO NOT store delicate items directly in your safe.
– In order to protect your valuables from potential threats of
flood, your safe is equipped with an airtight gasket. Because
of this gasket, moisture in the air could potentially be locked
inside your safe and accumulate inside your safe.
– The desiccant bag included in your safe during shipment
should be left inside your safe. . It is DO NOT DISCARD IT
intended to help absorb moisture. Replace or recharge
your desiccant bag every 6 months or as needed for
optimum performance.
– If you choose to store delicate items such as jewelry with
working parts, watches, stamps or photos in your safe, we
recommend putting them in an air-tight container prior to
placing in the safe for storage.
– NOTE: SentrySafe will not be responsible for any damage or
loss of items placed in the unit due to moisture.
• DO NOT store pearls in this safe. In the event of a fire, the
interior of your safe may reach up to 350˚F. While this temperature
is safe for your paper documents, digital media and other
valuables, pearls can be damaged at much lower temperatures.
• DO NOT store any film based technology or media in
this safe.
– This product is not intended to protect computer floppy disks
or diskettes, film cartridges, tapes, audio/video cassettes or
photo negatives.
• Your safe is only part of your total security protection.
– SentrySafe recommends that you store your safe in closets,
offices, basements, bedrooms and any other locations that
are convenient for you but out of direct line of sight from
prying eyes. The location of the safe does not affect the
safe’s ability to protect your valuables inside.
• This product is not intended for the secure
storage of all materials. Items such as
firearms, other weapons, combustible
materials and medication should not be
stored in this unit.
If your SentrySafe product is in a fire, it will be sealed shut making it necessary for it to be pried open. To help your family begin again, SentrySafe will ship a replacement
free of charge. To be eligible for the Limited Lifetime After Fire Replacement Program, you (the original owner) must register your product using the included registration form
or by visiting SentrySafe.com.
For more information about the Limited Lifetime After-Fire Replacement Program, visit SentrySafe.com
Limited Lifetime After-Fire Replacement Program
To Add a Secondary Fingerprint User
1
2
Press: “ ”P
Enter your programmed 5 digit primary user code.
NOTE: Blue light will blink to indicate the fingerprint sensor
is ready to scan a new fingerprint.
Swipe the first finger 5-10 times. Between each finger swipe
you should hear a single beep to indicate the fingerprint
was scanned.
When the safe has registered the first fingerprint the green
indicator light will blink 3 times and you will hear 3 beeps.
To register a second fingerprint for this user – immediately
repeat steps 3 & 4 with a second finger for this user.
-OR-
If you would like to program only one finger press “C”.
3
4
5
Deleting a Secondary Fingerprint User
1
2
Press: “ ”P
Enter your programmed 5 digit primary user code.
Swipe any fingerprint once.
Press: “ ”C
NOTE: The electronic lock will NOT indicate that it has
deleted the user’s fingerprint—please test to make sure it
has been deleted.
NOTE: This will delete both fingerprints for this user.
3
4
NOTE: Delay mode will occur if 5 consecutive invalid entries have
been tried. The red LED will blink on and off to let you know the
safe is in delay mode. This will cause the system to shutdown for
two minutes. DO NOT remove the batteries to restart the system;
it will only increase the length of time for the system shutdown.
1
2
Press: “ ” or touch the fingerprint C
sensor until indicator light is blue
to awaken the safe.
Swipe you finger in the
downward direction over the
fingerprint sensor. A green
light and one beep indicate
your finger has been scanned.
Rotate the handle downward
to open the door
3
Programming Safe Features
To turn the light feature : ” – “ ” – “ ”off Press: “0 P 2
To program the light for 30 seconds: Press: “ ” – “ ” – “ ”on 0 P 3
To program the light for 60 seconds: Press: “ ” – “ ” – “ ”on 0 P 4
Digital Keypad Sound On/Off
To turn keypad sound : ” – “ ” – “ ”off Press: “0 P 0
To turn keypad sound : Press: “ ” – “ ” – “ ”on 0 P 1
Unlocking the Safe
Using the
Fingerprint Scanner
Interior Light
The interior light in your safe can be programmed to illuminate for
various time intervals upon opening your safe.
NOTE: Turning the keypad sound off may make it more difficult to
use fingerprint scanner as a single beep indicates your finger has
been scanned.
English
Product specificaties
| Merk: | SentrySafe |
| Categorie: | Kluis |
| Model: | SFW123BUC |
Heb je hulp nodig?
Als je hulp nodig hebt met SentrySafe SFW123BUC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Kluis SentrySafe
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
Handleiding Kluis
- Kluis Philips
- Kluis Honeywell
- Kluis Abus
- Kluis Avanti
- Kluis Burg-Wachter
- Kluis Dometic
- Kluis Duralock
- Kluis EasySafe
- Kluis Ferm
- Kluis Filex
- Kluis FireKing
- Kluis First Alert
- Kluis Fluke
- Kluis Hama
- Kluis Handson
- Kluis M-Locks
- Kluis Master Lock
- Kluis Nauta
- Kluis Nedis
- Kluis Perel
- Kluis Phoenix
- Kluis Protector
- Kluis Renkforce
- Kluis ROMA
- Kluis Rottner
- Kluis Royal Safe
- Kluis Royal Sovereign
- Kluis Salvus
- Kluis Sentry
- Kluis Sistec
- Kluis SMC
- Kluis Sygonix
- Kluis Technomax
- Kluis Thule
- Kluis Toolland
- Kluis Topcraft
- Kluis Tulox
- Kluis Varo
- Kluis Westfalia
- Kluis Workzone
- Kluis Yale
- Kluis Jewel
- Kluis Juwel
- Kluis Olympia
- Kluis Oxloc
- Kluis First Austria
- Kluis Guzzanti
- Kluis Steren
- Kluis Barska
- Kluis Conrad
- Kluis SereneLife
- Kluis Challenge
- Kluis MSW
- Kluis Hard Head
- Kluis Kidde
- Kluis CAWI
- Kluis Kreator
- Kluis Fichero
- Kluis Kreator-Varo
- Kluis Rottner Tresor
- Kluis Olymp
- Kluis Suncast
- Kluis Winholt
- Kluis Homak Security
- Kluis NOFIRE
- Kluis Stamony
Nieuwste handleidingen voor Kluis
15 November 2024
15 November 2024
15 November 2024
13 November 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
26 September 2024
19 Juli 2024