Sennheiser EW 122-P G3 Handleiding

Sennheiser Receiver EW 122-P G3

Lees hieronder de đź“– handleiding in het Nederlandse voor Sennheiser EW 122-P G3 (1 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 69 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
QUICK START GUIDE
Unpack items from carton (This step for EM units only) Attach antennas and
place in a “V” shape. Insert country tip into AC
adapter, it will slide in and make a positive “click”.
Insert yellow plug into back of EM receiver unit.
Plug in lavalier microphone, headset mic,
or guitar cable into bodypack transmitter
and secure by gently tightening the
locking ring (if applicable)
Insert 2 x AA (UM3) batteries into the transmitter
(bodypack or handheld), observing polarity.
(Camera sets only): Insert 2 x AA batteries into
receiver bodypack (EK100G3). Connect either the
1/8” (3.5mm) or XLR camera output cable
1. 2.
3. 4.
PREPARING DEVICE FOR USE
FREQUENCY SCAN
Power on the receiver (EM or EK unit) by pressing the ON/OFF button. On the receiver, press SET to activate
the menu. Press up/down buttons to select “Easy Setup”. Press SET and choose “Scan New List.” Press SET
once more to start scan.
After the scan is completed (about 60 seconds) the receiver will suggest a BANK to choose with the most
free channels by placing the cursor over it. Press SET to confirm this BANK. Now select a channel using the
up/down arrows and press SET to confirm. The receiver will now say “STORED.”
Tap ON/OFF to exit the menu. The frequency chosen will be displayed. You should see zero
RF/AF activity on the meter (indicating you are on a free channel).
1.
2.
3.
1. 3.2.
1. 2. 3.
1a.
1.
4.
5.
Power up the transmitter (SK, SKM) you wish to pair with the receiver. Become familiar where the
infrared (IR) window is located. On a G3 handheld transmitter, the window is located on the LCD display.
On a bodypack transmitter, it is located under the battery door just to the right of the ON/OFF button
under a purple colored plastic.
Enter SYNC mode by pressing “SYNC” button (EM receivers) or selecting SYNC option from menu
(EK receiver). Once the SYNC logo displays, hold the handheld or bodypack infrared window facing
the left side of the receiver display about 6” away. When SYNC is successful, you will see a check
mark briefly next to the SYNC logo on the receiver screen. If you see an “X” next to the SYNC logo,
it indicates the sync failed and you should repeat the SYNC process.
2.
3.
FINAL SET-UP & TIPS
It is suggested that you adjust the receiver (EM or EK) AF OUT setting to around 0dB for most situations.
The AF OUT setting is your master ouput voume.
The SENSITIVITY setting (SK and SKM transmitters only) should be adjusted so that in your loudest
passages, the indicator briefly illuminates. As the settings move closer to “0 dB” they AF PEAK SENSITIVITY
become louder.
If setting up multiple systems in the same frequency range (A/B/G), you can repeat the
process for each system. “EASY SETUP/SCAN NEW LIST/SYNC”
Be sure to choose the same number (but a different channel number) for units in the same frequency BANK
range in order to ensure trouble-free operation.
It is suggested you perform the function whenever you use your unit in a EASY SETUP/SCAN NEW LIST
different area (at a gig etc.) Open frequencies vary from one location to another.
On the receiver: The meter bars indicate status. RF (Radio Frequency) meter is akin to “bars of RF and AF
reception” on your cellphone. The AF (Audio Frequency) meter moves moves whenever audio
is transmitted through the system.
On portable camera sets the receiver will clip onto the included camera shoe mount.CA2
Sennheiser Electronic Corporation
One Enterprise Drive, Old Lyme, CT 06371
Tel: (860) 434-9190 • Fax: (860) 434-1759 www.sennheiserusa.com
2a.
1b.
2b.


Product specificaties

Merk: Sennheiser
Categorie: Receiver
Model: EW 122-P G3
Kleur van het product: Zwart
Gewicht: 160 g
Gebruikershandleiding: Ja
Bluetooth: Nee
Type aansluitplug: 3,5 mm
Connectiviteitstechnologie: Bedraad en draadloos
Garantiekaart: Nee
Hoofdtelefoonuitgangen: 2
HDMI: Nee
Equalizer-instellingen: Ja
Frequentiebereik: 80 - 18000 Hz
Lijnuitgang: Nee
Lijningang: Nee
Signaal/ruis-verhouding: 110 dB
Afmetingen (B x D x H): 82 x 64 x 24 mm
Totale harmonische vervorming (THD): 0.9 procent
FM-band: 516 - 865 MHz
Afstandsbediening inbegrepen: Nee
Type batterij: AA

Heb je hulp nodig?

Als je hulp nodig hebt met Sennheiser EW 122-P G3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Sennheiser

Handleiding Receiver

Nieuwste handleidingen voor Receiver