Sencor SCT 9412DBMR Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Sencor SCT 9412DBMR (13 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13
SCT 9412DBMR
EN User Manual DAB+ CAR RADIO WITH AMULTIMEDIA
PLAYER AND RDS RADIO WITH BLUETOOTH
2 EN
EN Installation instructions
2021 08/2021
1. Installation instructions
 The device is designed to be powered by 12 Vdirect current. Before installing the
unit, check that your vehicle has a12 Vpower supply with the negative pole going to
ground.
 The negative pole of the battery must be disconnected before the device is
connected. This reduces the probability of damaging the device by an accidental
shorting of the circuit.
 Check that the unit is correctly connected according to the coloured leads based on
the wiring diagram. An incorrect wiring connection could cause the malfunction of the
unit or damage to the vehicle'selectrical system.
 Do not forget to connect the loudspeaker lead marked (-) to the (-) terminal. Never
connect the left and right loudspeaker leads together or to the car body.
 Do not cover the ventilation openings on the unit. Blocking them will increase the
temperatures inside the unit, which may damage it or cause afi re.
 This device can playback MP3 and WMA digital sound le formats.
 Do not attempt to repair the unit, modifi cations to the unit may cause amalfunction
or damage the device.
 Stop the vehicle before performing anything that could interfere with driving.
 Do not turn on the device in extremely high or low temperatures. The normal
operating temperature is between -10 and +50 °C.
ATTENTION
Ensure correct connection, particularly the power supply (larger draw) and
backup memory (smaller draw). This will keep the current draw in the turned off
state to aminimum and maintain your set preferences in the car radio memory.
EN 3
EN
Installation
2021 08/2021
2. Installation
The following accessories are included with the device
1 2 3 4 5
Main unit and front
panel (with case)
Remote control Reduction frame ISO connectors Audio and video
cable
6 7 8 9 0
Hex bolt Screw x 4pcs Rubber washer User’smanual ISO male
qa
Disassembly
tool (2PCS)
2.1. Assembly procedure
1. Insert the installation case into the dashboard.
2. For safe installation bend the fl aps inside into the dashboard.


Product specificaties

Merk: Sencor
Categorie: Niet gecategoriseerd
Model: SCT 9412DBMR

Heb je hulp nodig?

Als je hulp nodig hebt met Sencor SCT 9412DBMR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Sencor

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd