Selleys SolarFlex Clear Handleiding

Selleys Niet gecategoriseerd SolarFlex Clear

Lees hieronder de 📖 handleiding in het Nederlandse voor Selleys SolarFlex Clear (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Technical Data Sheet

Version 2.0

Updated 2 7/20209/

SELLEYS SOLARFLEX CLEAR

Page 1 of 2

WWW.SELLEYS.COM

All information contained in this Product Information Sheet is as accurate and up- -date as possible at the time of printing. Products can be expected to perform as indicated in this to

sheet, so long as application procedures and maintenance are followed as recommended. Any other warranties that may be implied are expressly excluded, except the consumer

guarantees under the Australian Consumer Law, where applicable, or any other non-excludable warranties under any State legislation, where applicable.

Head Oce 1 Gow Street, Padstow, NSW, 2211, Australia. T : 1300 555 205 (Aus); 0800 735 539 (NZ), Email support.selleysau@selleys.com el :

Description

Selleys SolarFlex™ High Performance

SMP Sealant Range is more durable than

conventional polyurethane sealants, even

in harsh weather conditions.

Product Information

Packaging

Size

Colour

Cartridge

300 grams

Clear

Uses

• For sealing, bonding and lling

• Suitable for wet or dry surfaces

• For interior/exterior applications

• Suitable for use on glass, metal, timber,

brick, concrete, tiles and most plastics#

Technical Features

• Superior Weather & UV resistance

• No primer required

• Long lasting exibility

• Adhesion to wet surfaces

• Better extrudability (>5°C)

• Better Curing (>5°C)

• Indoor/outdoor

• Paintable

• Mould resistance

• Non-bubbling

• Non-slumping

Technical Details

Property

Typical Result

Technology

Moisture curing

silyl-modied

polymer (SMP)

Colour

Clear

Density

~1.05 g/mL

Application

Temperature

5 to 35°C

Tooling Time

(23°C, 50% R.H.)

~ minutes 25

Skin Time

(23°C, 50% R.H.)

45 to 55minutes

Cure Rate

(23°C, 50% R.H.)

2.5 to 3mm/24hrs

Slump

0mm

Tensile Strength

(DIN 53504)

1 ± 0.1MPa

Shore A

Hardness

25 ± 5

Elongation at

Break (DIN

53504)

~ 180%

Modulus at 100%

Elongation

(DIN 53504)

0.6 ± 0.1MPa

Movement

Capability

(ISO9046

modied)

± 20%

Service

Temperature

0 to 70 C ˚

VOC Content

~ g/L 35

Indicative data only, not intended for

preparation of specications

Approvals/Standards

Meets GBCA VOC limits for general

purpose and architectural sealants.

Complies with AS/NZS4020: Potable water

contact. Cured Sealant at Area to volume

ratios up to 2500mm2/L - tested at water

temperatures up to 40°C).

Surface Preparation

Ensure surface is clean, dry and free from

dust, grease, old or crumbling sealant.

Technical Data Sheet

Version 2.0

Updated 2 7/20209/

SELLEYS SOLARFLEX CLEAR

Page 2 of 2

WWW.SELLEYS.COM

All information contained in this Product Information Sheet is as accurate and up- -date as possible at the time of printing. Products can be expected to perform as indicated in this to

sheet, so long as application procedures and maintenance are followed as recommended. Any other warranties that may be implied are expressly excluded, except the consumer