SE Electronics sE7 Handleiding

SE Electronics Microfoon sE7

Lees hieronder de 📖 handleiding in het Nederlandse voor SE Electronics sE7 (22 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/22

sE7

U s e r M a n u a l

User Manual - EN

Thank You

We would like to thank you cordially for choosing this sE microphone! This manual contains some

important instructions for setting up and operating your new equipment. Please take a few

minutes to read the instructions below carefully. We hope you will enjoy working with it as much

as we enjoyed designing and building it for you.

Most Sincerely,

Your sE Team

Brief Description

The sE7 is a high-quality back-electret small diaphragm condenser microphone intended for a

wide range of studio and live sound applications, from acoustic guitars to pianos to drums and

beyond. With an optimized acoustic design, discrete class-A circuitry and transformerless a

output, it delivers clear, natural sound quality at all frequencies, without suffering from fizzy highs

or a lack of low-frequency punch .

The discrete electronics and the switchable attenuation pad ensure a high dynamic range, with

high sound pressure level (SPL) handling capability and extremely low-noise components. The

switchable low-cut filter helps eliminate rumble or footfall noise, and can also compensate for an

excess of bass frequencies caused by the proximity effect. This enables the sE7 to close-mic

many instruments including electric guitar speaker cabinets, brass instruments and drums.

Reliable operation even in demanding on-stage applications in difficult environments is ensured by

the roadworthy all-metal design, robust construction, and high-quality manufacturing standards.

What’s in the box

Your packaging should contain the follow items. If anything is missing, please contact your sE

Electronics dealer and let them know.

s ingle)E7 (S

• sE7 microphone

• mic clip (with thread adapter)

• wind screen

sE7 (Matched Pair)

• 2x sE7 microphone

• 2x mic clip (with thread adapters)

• 2x wind screens

Controls

The sE7 features a switch for the attenuation pad and a switch for the low-cut filter.

Attenuation Switch

The is located on the upper rear side of the Attenuation Switch

microphone. When switched on, the incoming signal is reduced by 20

dB for the capture of loud instruments and/or close-miking without

distortion. Using the switch also helps prevent overloading the input

stage of recording interfaces, mixing desks and microphone preamps.

Low-Cut Switch

The Low-Cut Switch is located on the lower rear side of the

microphone and inserts a low-cut filter at 80Hz. The switch’s top

position removes the filter for a flat frequency response. Wind noise,

plosives, footfall noise or rumble might affect the recorded signal, so

enabling the low-cut filter reduces such unwanted noise and prevents

distortion. Additionally, the low-cut filter also minimizes the proximity

effect when recording sound sources at a very short distance.

Powering

To ensure proper operation, the microphone requires a phantom power source providing 48 Volts

according to IEC 61938.

Risk of damage

Do not connect the microphone to any power supply other than a phantom

power source (input with phantom power or external IEC standard phantom

power supply) with a floating connector, using a balanced cable with studio

grade connectors to IEC 268-12 only. This is the only way to ensure safe

and reliable operation.

Safety and maintenance

Risk of damage

Please make sure that the piece of equipment to which your microphone

will be connected fulfils the safety regulations enforced in your country and

is fitted with a ground lead.

Cleaning the microphone

After every use, clean the microphone with a dry, soft cloth tissue and store it in a solid case or a

zipper pouch.

Technical Specification

Capsule

1/2“ back-electret condenser capsule

Polar patterns

Cardioid

Frequency range

20 20,000 Hz –

Sensitivity

19 mV/Pa (-34.5 dBV)

Max. SPL (0.5% THD)

136 / 156 dBSPL

(0/20 dB Attenuation pad)

Equivalent noise level

16 dB(A)

Dynamic range

120 140 dB (0/20 dB Attenuation pad) /

Signal- -noise ratio to

78 dB

Low cut filter

80 Hz, 6 dB/Oct, switchable

Attenuation pad

20 dB, switchable

Product specificaties

Merk:	SE Electronics
Categorie:	Microfoon
Model:	sE7
Kleur van het product:	Black, Red
Hoogte:	120 mm
Soort:	Microfoon voor studio's
Connectiviteitstechnologie:	Bedraad
Diameter:	23 mm
Certificering:	IEC 61938
Aansluiting:	XLR-3
Stroomverbruik:	3 mA
Verpakkingsinhoud:	Mic clip (with thread adapter)
Microphone direction type:	Cardioïde
Gevoeligheid microfoon:	-34.5 dB
Operating voltage:	48 V
Spreekspoel types:	Condensor
Frequentie microfoon:	20 - 20000 Hz
Microphone input impedance:	200 Ohm
Aantal producten inbegrepen:	1 stuk(s)
Gewicht microfoon:	128 g
Microfoon Signal-to-Noise Ratio (SNR):	78 dB
Gevoeligheid (1 kHz):	19 mV/Pa
Aanbevolen belastingsimpedantie:	1000 Ohm
Microphone dynamic range:	140 dB
Dempkussen:	20 dB
Inclusief windscherm:	Ja
Equivalent geluidsniveau:	16 dB
laag-af filter:	80 Hz