SE Electronics sE2300 Handleiding

SE Electronics Microfoon sE2300

Lees hieronder de 📖 handleiding in het Nederlandse voor SE Electronics sE2300 (32 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/32

sE2300

U s e r M a n u a l

User Manual - EN

Thank you

We would like to thank you cordially for choosing this sE microphone! This manual contains some

important instructions for setting up and operating your new equipment. Please take a few

minutes to read the instructions below carefully. We hope you will enjoy working with it as much

as we enjoyed designing and building it for you.

Most Sincerely,

Your sE Team

Brief Description

The sE2300 is the latest multi-pattern version of the fan-favorite 2200 condenser that put sE

Electronics on the map many years ago with its smooth, polished sound for vocals, voiceovers,

and numerous instrumental applications. Like its well-known predecessors, the sE23 is a high-00

quality condenser microphone intended for a wide range of studio applications, from vocals and

spoken word to acoustic instruments to drums d beyond. Thanks to its hand-crafted large-an

diaphragm true condenser capsule, shielded custom transformer and class-A circuitry (no ICs

here!) it delivers pristine, flattering sound quality, exceptionally low noise, and an even, well-

balanced frequency response.

The electronics and the switchable attenuation pads ensure a high dynamic range, with high

sound pressure level (SPL) handling capability and extremely low-noise components. The

switchable low-cut filters eliminate rumble or footfall noise, and can also compensate for an

excess of bass frequencies caused by the proximity effect. This enables the sE2300 to close-mic

many instruments including electric guitar speaker cabinets, brass instruments and drums. The

three switchable polar patterns also all for the tailoring of the balance between direct and ow

ambient sound, providing many options for various recording techniques.

Reliable operation even in demanding applications in difficult environments is ensured by the

roadworthy all-metal design, robust construction, and high-quality manufacturing standards.

What’s in the box

Your packaging should contain the follow items. If anything is missing, please contact your sE

Electronics dealer and let them know.

• sE23 microphone 00

• sE Isolation Pack (shock mount, pop filter)

• thread adapt er

Controls

The sE23 features a switch for the attenuation pads a switch for the low-cut filters, and a 00 ,

switch for the polar pattern selection.

Attenuation Switch

The is located on the front-left side of the Attenuation Switch

microphone. When switched on, the incoming signal is reduced by

either 10 or 20 dB for capturing of loud instruments and/or close-

miking without distortion. Using the switch also helps prevent

overloading the input stage of recording interfaces, mixing desks and microphone preamps.

Low-Cut Switch

The Low-Cut Switch is located on the front-right side of the microphone,

and inserts a low-cut filter at 80Hz (left position) or 160Hz (right

position). The switch’s center position removes the filter for a flat

frequency response. Wind noise, plosives, footfall noise or rumble might

affect the recorded signal, so enabling the low-cut filters reduces such

unwanted noise and prevents distortion. Additionally, the -cut filterlow s

also minimize the proximity effect when recording sound sources at a

very short distance.

Pattern Switch

The 3-position Pattern Switch is located on the rear side of the

microphone, and allows the sE2300’s polar pattern to be changed from

omnidirectional to cardioid to figure-eight. This allows for great control

over the balance between direct and ambient sound.

Powering

To ensure proper operation, the microphone requires a phantom power source providing 48 Volts

according to IEC 61938.

Risk of damage

Do not connect the microphone to any power supply other than a phantom

power source (input with phantom power or external IEC standard phantom

power supply) with a floating connector, using a balanced cable with studio

grade connectors to IEC 268-12 only. This is the only way to ensure safe

and reliable operation.

Safety and maintenance

Risk of damage

Please make sure that the piece of equipment to which your microphone

will be connected fulfils the safety regulations enforced in your country and

is fitted with a ground lead.

Cleaning the microphone

After every use, clean the microphone with a dry, soft cloth tissue and store it in a solid case or a

zipper pouch.

Technical Specifications

Capsule

Hand-crafted 1“ true condenser capsule

Polar patterns

Cardioid, Omni-directional, Figure-8

Frequency range

20 20,000 Hz –

Product specificaties

Merk:	SE Electronics
Categorie:	Microfoon
Model:	sE2300
Kleur van het product:	Zwart
Breedte:	51 mm
Hoogte:	215 mm
Soort:	Microfoon voor podiumpresentaties
Type verpakking:	Doos
Connectiviteitstechnologie:	Bedraad
Diameter:	51 mm
Plug and play:	Ja
Ingangsspanning:	48 V
Aansluiting:	mini XLR (3-pin)
Signaal/ruis-verhouding:	85 dB
Verpakkingsinhoud:	sE2300 Studio Condenser Microphone\nIsolation Pack (shockmount, pop filter)\nThread adapter\nsE Logo sticker\nUser manual with warranty card
Microphone direction type:	Cardioïde/omnidirectionele microfoon
Gevoeligheid microfoon:	146 dB
Frequentie microfoon:	20 - 20000 Hz
Microphone input impedance:	40 Ohm
Aantal producten inbegrepen:	5 stuk(s)
Gewicht microfoon:	611 g
Gevoeligheid (1 kHz):	24 mV/Pa
Aanbevolen belastingsimpedantie:	1000 Ohm
Equivalent geluidsniveau:	9 dB