SE Electronics sE2200 Handleiding

SE Electronics Microfoon sE2200

Lees hieronder de 📖 handleiding in het Nederlandse voor SE Electronics sE2200 (24 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 57 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/24

sE2200

U s e r M a n u a l

User Manual - EN

Thank you

We would like to thank you cordially for choosing this sE microphone! This manual contains some

important instructions for setting up and operating your new equipment. Please take a few

minutes to read the instructions below carefully. We hope you will enjoy working with it as much

as we enjoyed designing and building it for you.

Most Sincerely,

Your sE Team

Brief Description

The sE2200 is the latest version of the fan-favorite condenser that put sE Electronics on the map

many years ago with its smooth, polished sound for vocals, voiceovers, and numerous

instrumental applications. Like its predecessors, the sE2200 is a high-quality condenser

microphone intended for a wide range of studio applications, from vocals and spoken word to

acoustic instruments to drums and beyond. Thanks to its hand-crafted large-diaphragm true

condenser capsule, shielded custom transformer and class-A circuitry (no ICs here!) it delivers

pristine, flattering sound quality, exceptionally low noise, an even, well-balanced frequency and

response.

The electronics and the switchable attenuation pads ensure a high dynamic range, with high

sound pressure level (SPL) handling capability and extremely low-noise components. The

switchable low-cut filters eliminate rumble or footfall noise, and can also compensate for an

excess of bass frequencies caused by the proximity effect. This enables the sE2200 to close-mic

many instruments including electric guitar speaker cabinets, brass instruments and drums.

Reliable operation even in demanding applications in difficult environments is ensured by the

roadworthy all-metal design, robust construction, and high-quality manufacturing standards.

What’s in the box

Your packaging should contain the follow items. If anything is missing, please contact your sE

Electronics dealer and let them know.

• sE2200 microphone

• sE Isolation Pack (shock mount, pop filter)

• thread adapt er

Controls

The sE2200 features a switch for the attenuation pads and a switch for the low-cut filters.

Attenuation Switch

The Attenuation Switch is located on the front-left side of the

microphone. When switched on, the incoming signal is reduced by

either 10 or 20 dB for capturing of loud instruments and/or close-

miking without distortion. Using the switch also helps prevent

overloading the input stage of recording interfaces, mixing desks and

microphone preamps.

Low-Cut Switch

The Low-Cut Switch is located on the front-right side of the

microphone, and inserts a low-cut filter at 80Hz (left position) or 160Hz

(right position). The switch’s center position removes the lter for a flat

frequency response. Wind noise, plosives, footfall noise or rumble

might affect the recorded signal, so enabling the -cut filters reduces low

such unwanted noise and prevents distortion. Additionally, the low-cut

filters also minimize the proximity effect when recording sound

sources at a very short distance.

Powering

To ensure proper operation, the microphone requires a phantom power source providing 48 Volts

according to IEC 6193 8.

Risk of damage

Do not connect the microphone to any power supply other than a phantom

power source (input with phantom power or external IEC standard phantom

power supply) with a floating connector, using a balanced cable with studio

grade connectors to IEC 268-12 only. This is the only way to ensure safe

and reliable operation.

Safety and maintenance

Risk of damage

Please make sure that the piece of equipment to which your microphone

will be connected fulfils the safety regulations enforced in your country and

is fitted with a ground lead.

Cleaning the microphone

After every use, clean the microphone with a dry, soft cloth tissue and store it in a solid case or a

zipper pouch.

Technical Specifications

Capsule

Hand-crafted 1” true condenser capsule

Polar patterns

Cardioid

Frequency range

20 20,000 Hz –

Sensitivity

23.7 mV/Pa (-32.5 dBV)

Max. SPL (0.5% THD)

125 / 135 / 145dBSPL (0/10/20 dB Attenuation pad)

Equivalent noise level

12 dB(A)

Dynamic range

113 / 123 / 133 dB (0/10/20 dB Attenuation pad)

Signal- -noise ratio to

82 dB

Low cut filter

80 / 160Hz, 6 dB/Oct, switchable

Product specificaties

Merk:	SE Electronics
Categorie:	Microfoon
Model:	sE2200
Kleur van het product:	Zwart
Breedte:	51 mm
Hoogte:	215 mm
Soort:	Microfoon voor studio's
Type verpakking:	Doos
Connectiviteitstechnologie:	Bedraad
Diameter:	51 mm
Plug and play:	Ja
Ingangsspanning:	48 V
Aansluiting:	mini XLR (3-pin)
Signaal/ruis-verhouding:	86 dB
Verpakkingsinhoud:	sE2200 Studio Condenser Microphone\nIsolation Pack (shockmount, pop filter)\nThread adapter\nsE Logo sticker\nUser manual with warranty card
Microphone direction type:	Cardioïde
Gevoeligheid microfoon:	145 dB
Frequentie microfoon:	20 - 20000 Hz
Microphone input impedance:	50 Ohm
Aantal producten inbegrepen:	5 stuk(s)
Gewicht microfoon:	611 g
Gevoeligheid (1 kHz):	23.7 mV/Pa
Aanbevolen belastingsimpedantie:	1000 Ohm
Equivalent geluidsniveau:	8 dB