SE Electronics DynaCaster Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor SE Electronics DynaCaster (36 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 107 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36
D y n a C a s
D y n a C a s
D y n a C a s
D y n a C a sD y n a C a s t e r
t e r
t e r
t e rt e r
U s e r M a n u a l
U s e r M a n u a l
U s e r M a n u a l
U s e r M a n u a lU s e r M a n u a l
2
User Manual - EN
Thank you
Thank you for choosing an sE microphone! In addition to some basic safety precautions, this manual
includes details and specifications to help you get the most out of your DynaCaster. Please take a few
minutes to read through it.
Capturing excellent audio is our passion. We sincerely hope you’ll enjoy the sound of this mic as much as
we’ve enjoyed designing and building it for you.
Happy Broadcasting,
The sE Team
Brief Description
The DynaCaster has been designed from scratch to set a new standard for broadcast-style microphones. Its
brand new DMC8 capsule and integrated DYNAMITE preamp provide better sonic reproduction, more -
sensitivity, and less noise than the standards of decades past. The capsule has a patented shock absorption
system built into its body, preventing the need for a bulky external shockmount. Best of all, the three
recessed switches on the rear of the microphone allow you to tune the DynaCaster to your specific tonal
needs.
The DynaCaster is compatible with all broadcast boom arms. Furthermore, the XLR jack is integrated into
the stand mounting point for unobtrusive cabling and a low profile for on-camera applicatons. The internal
three-layer pop filter is removable for cleaning, and designed to offer enough plosive protection to be used
without an external “chunky“ pop filter. However, we’ve included an external windscreen, just in case that
suits your preference.
The DynaCaster is not just a speaking microphone. It can be used for singing, acoustic instruments, and
miking amplifiers. All of the features that make it great for broadcast applications double as tone-tailoring
options when recording and performing music!
What’s in the box
• DynaCaster microphone
• External windscreen
• Microphone stand thread adapter
Controls
The DynaCaster has three switches. The middle switch toggles the internal DYNAMITE preamp on and off.
On the left and right are acoustic trim switches, allowing you to fine-tune the overall voicing of the
microphone.
3
DYNAMITE I/O Switch
When the DYNAMITE I/O Switch [middle] is in the “on” position, the
DynaCaster’s internal DYNAMITE preamp provides 30 dB of additional gain,
ideal for speech and softer sources. This requires Phantom power.
In the “off” position, the DynaCaster functions as a completely passive
microphone, not requiring any external or Phantom power.
Low Frequency Trim
The microphone’s Low Frequency Trim [left] switch gives you three
different options for it low-end character. The center position is flat, or unaffected. The downward
position attenuates the lows to reduce boominess, also known as the proximity effect. In the upward
position, the lows are slightly boosted, giving the microphone’s sound some extra richness. This can be
helpful when speaking from a farther distance, or miking an instrument that sounds a bit thin.
High Frequency Trim
The microphone’s High Frequency Trim [right] switch gives you three different options for its presence
character. The downward position is flat, or unaffected. The center position creates a slight high-
frequency boost to add clarity, and help your voice cut through a busy background. The fully upward
position boosts the highs through the presence range, helping to correct for rooms where acoustic
treatment has absorbed too much treble.
The Three-Layer Pop Filter
Broadcast microphones are a staple of social media channels that are distributed as video, in addition to
audio. One of the issues we tried to address in designing the DynaCaster is the visual disruption of external
windscreens and pop filters. To keep your video looking clean, the DynaCaster has an internal three-layer
pop filter. This concept has been extensively tested to stand up to plosives, without the need for any external
protection.
The three-layer pop filter and microphone grille can be
easily removed and cleaned as needed. Simply turn the
speaking surface of the microphone counter clockwise to -
remove it. From there, the pop filter will easily lift out. Use
a soft cloth, moistened with water only. Do not use any
cleaning agents or aggressive liquids. Once clean,
reassemble the mic and turn the speaking surface
clockwise until tight. You’re ready to go!


Product specificaties

Merk: SE Electronics
Categorie: Microfoon
Model: DynaCaster

Heb je hulp nodig?

Als je hulp nodig hebt met SE Electronics DynaCaster stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Microfoon SE Electronics

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon