Scott LSX 10 Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Scott LSX 10 (4 pagina's) in de categorie Cradle/docking station. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
MODEL NO.: LSX 10
WIRELESS LED LIGHT WITH SPEAKER
Instruction Manual
GB-1
PRECAUTIONS
Follow the instructions below to ensure the product is used safely and correctly.
PLACEMENT
. Do not use the unit in places which are extremely hot, cold, dusty, or humid.
. Do not restrict the airflow around the unit by placing it in a place with poor ventilation.
. Do not place the unit close to heat sources.
. Use the apparatus only in moderate climates.
. Do not expose the unit to rain or splash with water.
. Do not place objects filled with liquids, such as vases on the unit.
AC VOLTAGE
. Before use, check that the rated voltage of your unit matches your local voltage.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with an
arrowhead symbol within
a triangle is a warning
sign alerting the user to
the presence of
β€œdangerous voltage”
inside the unit.
ATTENTION: To reduce the
risk of electric shock, do not
remove the cover. There are no
user serviceable parts inside
the unit. Refer all servicing to
qualified personnel.
The exclamation mark
within a triangle is a
warning sign alerting the
user to the presence of
important instructions
accompanying the
product.
Congratulations on your purchase of this additional wireless light with loud
speaker that we hope will fully meet your requirements. It will allow you to
improve iDXS 10L / iXSW 50 system.
TABLE OF CONTENTS
PRECAUTIONS 1
TABLE OF CONTENTS 1
BOX CONTENTS 2
LOCATION OF CONTROLS 2
POWER SUPPLY AND INSTALLATION 2
BASIC OPERATION 2
MAINTENANCE 3
TROUBLESHOOTING GUIDE 3
TECHNICAL SPECIFICATIONS 3
GB-2
BOX CONTENTS
1. LED Light with speaker
2. Pin for pairing 3. Instruction manual
LOCATION OF CONTROLS
LED light with speaker
1. E27 screw
2. LED light
3. Pair button
4. Standby LED
5. Speaker
POWER SUPPLY AND INSTALLATION
LED light with speaker
Make sure the power source is switched off before installation.
Screw the LED light with speaker to an E27 socket with an AC 100-240V ~
50/60Hz power source.
Note: Do not use your external dimmer control that may cause the unit
malfunction. To dim the light, press the button repeatedly.
BASIC OPERATION
Note: This LED light with speaker must be used with the docking station -
SCOTT model no.: iDXS 10L or iXSW 50. Refer to the instruction manual of
the docking station for detail operation.
Standby/On mode
Device Standby On
LED light with
speaker
Standby LED:
LED light: On
Off Off
On
PAIRING
Note: Make sure that the LED light with speaker is powered properly. Refer to the
manual of your iDXS 10 L or iXSW 50 system for more information about pairing.
Pairing is to ensure your LED light with speaker can receive RF transmission
correctly from the docking station.
1. If you want to pair this new light in an existing group (one station + 2 lights to
get stereo sound), you have to reset the pairing first: when the docking station
is in standby mode, use the piece (supplied) to press and hold the PAIR button
of the docking station for more than 10 seconds until the source LEDS at the
top of the docking station flash. The station then goes back to standby mode.
2. Press the PAIR buttons briefly at the bottom of the docking station first and
then the other devices within one minute. All the standby LEDs will blink rapidly
until the pairing is successful in about one minute and the source LEDS at the
top of the docking station will flash for few seconds.
3. For pairing the next group, repeat above step (2).


Product specificaties

Merk: Scott
Categorie: Cradle/docking station
Model: LSX 10
Kleur van het product: Wit
Gewicht: 580 g
Breedte: 180 mm
Diepte: 120 mm
Hoogte: 160 mm
Stroomvoorziening: 100 - 240V AC
LED-indicatoren: Ja
AC-adapterfrequentie: 50/60 Hz
Connectiviteitstechnologie: Bedraad en draadloos
Type stroombron: AC
Gemiddeld vermogen: 10 W
Aantal luidsprekers: 1
FM-radio: Nee
Aanbevolen gebruik: Universeel
Impedantie: 4 Ohm
Audio-uitgangskanalen: 1.0 kanalen
Aantal drivers: 1
Frequentiebereik: - Hz
Afmetingen (B x D x H): 180 x 120 x 160 mm
Ingebouwde lader: Nee
Ingebouwde zaklamp: Ja
Productontwerp: Soundbar
Type product: Mono draadloze luidspreker

Heb je hulp nodig?

Als je hulp nodig hebt met Scott LSX 10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Cradle/docking station Scott

Handleiding Cradle/docking station

Nieuwste handleidingen voor Cradle/docking station