Scosche BlueFusion BFTAK Handleiding

Scosche zestaw samochodowy BlueFusion BFTAK

Lees hieronder de šŸ“– handleiding in het Nederlandse voor Scosche BlueFusion BFTAK (12 pagina's) in de categorie zestaw samochodowy. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
BFTAK
HANDS-FREE BLUETOOTHĀ® INTERFACE FOR SELECT
2005-UP SELECT TOYOTA, SCION, LEXUS VEHICLES
Ā©2010 SCOSCHE INDUSTRIES, INC.
iPhone is a trademark of Apple Inc., registered in the US and other countries.
SI 02/10-BFTAK (3000493)
SAT-READY RADIO IS REQUIRED FOR
ALL APPLICATIONS LISTED BELOW
APPLICATIONS HARNESS APPLICATIONS
Scoscheā€™s BFTAK Bluetooth Interface will allow you to wirelessly communicate with your
Bluetooth enabled celular phone and Stereo Bluetooth transmitters. The BFTAK communi-
cates directly with your factory radio allowing you direct control of hands-free, voice dialing,
and A2DP functionality. These interfaces maintain the original integrity of important diagnostic
and safety systems within the vehicle. For up-to-date applications or any Technical asistance
with this product, call Scosche Tech support at (800) 621-3695 Ext 3.
LEXUS
GS 2006-07
IS250/350 2006-08
RX350 2005-08
SCION
tC 2005-06
xA 2005-06
xB 2005-06
xB 2008-09
xD 2008-09
TOYOTA
4RUNNER 2005-09
AVALON 2005-09
CAMRY 2007-09
COROLLA 2005-09
FJ CRUISER (PREMUIM/JBL RADIOS ONLY) 2007-09
HIGHLANDER 2005-09
LAND CRUISER 2005-07
MATRIX (NON-JBL RADIOS ONLY) 2009
MATRIX 2005-08
PRIUS W/NAVIGATION ONLY 2005-08
RAV4 2006-09
SEQUOUIA 2006-09
SIENNA 2005-09
SOLARA 2005-09
TACOMA (NON-JBL RADIOS ONLY) 2009
2
IMPORTANT CELL PHONE DISCLAIMER: READ FIRST!
ā€¢ī˜ Someī˜cellularī˜phoneī˜manufacturersī˜utilizeī˜aī˜Bluetooth microprocessor that
unfortunately is not compatible with the BlueFusion system. Some phones
from Palm, LG (Envy/Envy2), Samsung (Impression) and HTC (Omni) have
exhibited operating difficulties with the BlueFusion system. If you own these
models or other models from these manufacturers call Scosche Tech Support
for the latest updated phone incompatibility list. (800) 621-3695.
ā€¢ī˜ Thisī˜BlueFusionī˜deviceī˜willī˜pairī˜toī˜ONEī˜phoneī˜atī˜time.
ā€¢ī˜ Dueī˜toī˜variancesī˜inī˜cellī˜phoneī˜manufacturing,ī˜Callerī˜IDī˜functionsī˜mayī˜varyī˜
from what is printed in this manual.
ā€¢ī˜ BlueFusionī˜doesī˜notī˜supportī˜phoneī˜bookī˜profiles.
ā€¢ī˜ Scoscheī˜doesī˜notī˜guaranteeī˜100%ī˜compatibilityī˜withī˜allī˜Bluetooth
cellphones.
SAT1MainMenu ch001
CH 001
1VoiceCmd
CH 002
2Incoming
CH 003
3Redial
CH 100
6->SAT
CH 005
5Outgoing
CH 004
4Missed
TEXT
TYPE
SEEK TYPE
SCAN
TYPETYPE
SOUND ASL
BLUEFUSION
WORKS WITH
NAVIGATION RADIOS
AND
NON-NAVIGATION RADIOS
RADIO COMPATABILITY
INSTALLATION
NOTE: RADIO ILLUSTRATIONS ABOVE ARE OF TYPICAL. THERE ARE ADDITIONAL
RADIO MODEL/ STYLES THAT ARE COMPATIBLE WITH BLUEFUSION.
YOUR CAR MAY DIFFER.
TECH TIP: When mounting the BFTAK make sure to be clear of all moving
mechanical device that may hit or damage the interface. Keep away from any
hot surface areas like heater ducts direct sun light and metal surface areas that
have the potential of getting hot.
BFTAK INTERFACE INSTALLATION
1. Carefully remove the radio from the dash of the vehicle (For assistance you
can contact Scosche Tech Support at 800-361-3695).
2. Plug the male 12-pin connector of the BFTAK harness into the female 12-pin
port on the back of the radio, then connect the factory male 12-pin connector
into the female 12-pin connector on the BFTAK harness.
3. Plug the male 20-pin connector of
the BFTAK harness into the female
20-pin port on the back of the radio,
then connect the factory male
20-pin connector into the female
20-pin connector on the BFTAK
harness.
4. Plug the male 24-pin connector of
the BFTA harness into the BFTAK
interface.
12 Pin Male Plug
To Factory Harness
12 Pin Factory Male Plug12 Pin Female Plug
FACTORY
RADIO
Microphone
3 Pin Male Plug
20 Pin Male Plug
20 Pin Female Plug
TECH TIP: Aim the microphone in the direction of the driverā€™s headrest.
MICROPHONE INSTALLATION:
1. Attach the microphone to the headliner above the rear view mirror.
2. Carefully route the microphone cable behind the headliner and down the ā€œAā€
(front most) pillar. Use caution when routing cable and avoid sharp edges or
moving metal parts.
3. Route the cable to the BlueFusion interface location and plug it into the 3-pin
connector on the Scosche ā€œT ā€œharness.
3
PAIRING YOUR CELLULAR PHONE
MICROPHONE INSTALLATION
IMPORTANT NOTE: Your Bluetooth cellular phone must be paired with the
BlueFusion system before use. Once the initial pairing process has been
completed, your phone should easily connect and disconnect to BlueFusion
during normal use.
PAIRING INSTRUCTIONS:
1. Once the hardware has been properly installed, insert the key and start the
vehicle. The BlueFusion interface needs to read the vehicleā€™s ignition codes to
ī˜ī˜ī˜ī˜properlyī˜initialize.ī˜
2. Press the ā€œAM/SATā€, or ā€œSATā€ button on the radio to get to the XM Sat radio
source. On Toyota Highlander: PRESS FM2 then AM to access the NOTE:
SAT Radio source.
3A.Vehicleā€™s with Satellite Radio installed: Press #6 preset button or touch
the ā€œ->Bluefusionā€ button on Navigation radios to get to BlueFusion screen.
3B. Vehicleā€™s without Satellite Radio installed. BlueFusion menu screen will
be displayed at this step. You do not have to use Preset #6 Button or the
ā€œ->Bluefusionā€ touch screen button to switch between Satellite and
BlueFusion screens.
4. Once in the BlueFusion mode, you will hear a beep tone indicating that
BlueFusion is in pairing mode. (BlueFusion enters pairing mode automatically
when the Ignition is turned on and no phone is currently paired.)
5. From your phoneā€™s Bluetooth menu, perform a search for new devices (refer
to your cell phone user manual). The phone should display ā€œBlueFusionā€
6. Select [pair to] BlueFusion and enter pin code 0000 when prompted. This will
complete the pairing process. (Once your phone paired with BlueFusion, the
beep tones should stop and BlueFusion is now ready for use.)


Product specificaties

Merk: Scosche
Categorie: zestaw samochodowy
Model: BlueFusion BFTAK

Heb je hulp nodig?

Als je hulp nodig hebt met Scosche BlueFusion BFTAK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden