Scanstrut SATPT-60 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Scanstrut SATPT-60 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Scanstrut Ltd.
Scanstrut Ltd.
Scanstrut Ltd.
Scanstrut Ltd. Scanstrut Ltd. 1 Malt Mill, Totnes, Devon, UK TQ9 5NH Tel:
Tel:
Tel:
Tel:Tel: +44(0)1803 863800 Fa
Fa
Fa
FaFax:
x:
x:
x:x: +44(0)1803 862223
e-mail:
e-mail:
e-mail:
e-mail:e-mail: technical@scanstrut.com website:
website:
website:
website:website: www.scanstrut.com
Satcom/TV PowerTower – SATPT-60
Installation Instructions
SATPT-60 kit contents
[ ] 1 x SATPT-60
[ ] 1 x Base Seal [19083]
[ ] 4 x Nylon Shouldered Washers [64004]
[ ] 2 x Scanstrut stickers [40113]
Also Required:
• 4 x M8 Stainless Steel bolts, large washers and nuts to attach SATPT to deck/arch. Length
to suit deck/arch thickness.
• 8.5mm Drill.
• Hole Cutter for cable loom; 65mm[2.5”] dia.
Drilling Guide
Fitting SATPT-60
1. Drill holes in arch to match SATPT-60 base and a central cable exit – See drilling guide.
2. Thread the cable loom up through the arch, base seal and into the SATPT-60.
3. Pull enough cable through the SATPT-60 and through the antenna’s base seal to reach the
antenna.
4. Once enough cable has been pulled through fasten the SATPT-60 to the arch, ensuring
foam Base Seal is positioned under the SATPT-60 base.
5. With antenna sitting on it’s base seal, fasten the antenna to the top plate with the bolts
supplied and attach cable.


Product specificaties

Merk: Scanstrut
Categorie: Niet gecategoriseerd
Model: SATPT-60

Heb je hulp nodig?

Als je hulp nodig hebt met Scanstrut SATPT-60 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Scanstrut

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd