Scanstrut DPT-R Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Scanstrut DPT-R (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
16-01-18 Issue 2
ø50-70mm (2” - 2.75”)
Forward
4x 610825
4x 60085
4x 60080
4x 60857
6x 610816
6x 64026
19070
Radar Plate
Satcom / Camera Plate
Optional Light bar
4x 64004 (Bolts not supplied)
2x 101819
19008
**APPLY BONDLOC B243 TO 6x M8x16mm**
101816
Hole Saw
ø50-70mm (2” - 2.75”)
Tools Required
Power drill
ø10.5mm (27/64”) Drill Bit
M10 x 25mm+
Parts Required
x4
8-10mm Flat Screwdriver
13mm Spanner
Base Seal
101816
101819 19070
Cable Grommet
Blanking Plug
DPT gasket
Parts List
x1
x1
x2
x1
19008
x4
60617
M6x16mm
x4
M10 Nylon Shoulder washer
64004
DPT-R Installation Instructions
®
Dual PowerTower®
Scanstrut Ltd. 5 Dart Business Park, Clyst St. George, Exeter. EX3 0QH Tel: +44(0)1392 531280
E-mail: support@scanstrut.com Website: www.scanstrut.com
IMPORTANT
PowerTowers are only compatible with marine electronics devices as stated in the latest Scanstrut Product Guide – subject to change without prior notice.
Use of the Power Towers with unapproved products, or overloading, invalidates any product warranty.
Scanstrut does not supply fastenings to x this product to the chosen surface. Please choose suitable fastenings for this purpose.
No liability is accepted for damage caused by incorrect installation.
The installation and assembly must be regularly inspected for evidence of damage or loose parts.
Product has been designed specically for the mounting of approved marine electronics under normal boating conditions.
IMPORTANT
Supports PowerTower sont uniquement compatibles avec les appareils d’électronique marine repris dans le dernier Guide Produits Scanstrut – sujet à Modica-
tion sans préavis.
L’usage des Supports Power Tower avec des produits non validés, ou la surcharge de ces supports, annulent toute garantie.
Scanstrut ne fourni pas les xations pour sécuriser ce produit à la surface de choix. Veuillez utiliser des xations appropriées pour cette opération.
Scanstrut déclinent toute responsabilité pour les dégats résultant d’une installation incorrecte.
Linstallation et l’assemblage doivent être inspectés régulièrement an de déceler des dégats ou des pièces désserrées
Ce produit a été spéciquement conçu pour le montage d’appareils d’électronique marine approuvés dans des conditions de navigation normales.
WICHTIG
PowerTower sind nur mit Elektronikgeräten für die Schifahrt kompatibel, wie in der aktuellen Scanstrut Produktübersicht erwähnt. Änderungen ohne
vorherige Ankündigung vorbehalten.
Durch die Verwendung mit nicht genehmigten Produkten bzw. durch Überlastung wird jegliche Garantie ungültig.
Befestigungsteile für die Montage dieses Produkts auf der gewählten Oberäche. Bitte wählen Sie geeignete Befestigungsteile für diesen Zweck.
Für Schäden aufgrund unsachgemäßen Einbaus wird keine Haftung übernommen.
Der Anbau und die Baueinheit müssen regelmäßig auf Anzeichen von Schäden oder lockere Teile geprüft werden.
Dieses Produkt wurde spezisch für die Befestigung genehmigter Elektronikgeräte für die Schifahrt unter normalen Bootsfahrtsbedingungen entwickelt.
IMPORTANTE
Gli PowerTowers sono compatibili solo con apparecchiature elettroniche navali come indicato nella più recente Guida ai Prodotti Scanstrut – fatte salve
eventuali modiche senza preavviso.
L’uso di PowerTowers con prodotti non approvati, o un loro sovraccarico, invalida qualsiasi garanzia.
Scanstrut non fornisce dispositivi per ssare questo prodotto alla supercie prescelta. Scegliere dispositivi di ssaggio adatti a questo scopo.
Si declina qualsiasi responsabilità per danni causati da uninstallazione erronea.
Linstallazione e il montaggio devono essere ispezionati con regolarità per vericare la presenza di danni o di pezzi allentati.
Questo prodotto è stato studiato appositamente per il supporto di apparecchiature elettroniche navali approvate in normali condizioni di navigazione.
IMPORTANTE
PowerTowers son compatibles únicamente con equipos electrónicos marinos según se establece en la última Guía de Productos Scanstrut– sujeto a cambios
sin previo aviso.
El uso de los PowerTowers con productos no aprobados, o bajo exceso de carga, invalidará cualquier garantía.
Scanstrut no suministra anclajes para jar el producto sobre la supercie elegida. Escoja el sistema de jación más adecuado para este propósito.
No se aceptará ninguna responsabilidad por los daños causados por una instalación incorrecta.
La instalación y ensamblaje deberá inspeccionarse regularmente, comprobando cualquier evidencia de daños o piezas aojadas.
Este producto ha sido especícamente diseñado para el montaje de equipos electrónicos marinos aprobados bajo condiciones normales de navegación.


Product specificaties

Merk: Scanstrut
Categorie: Niet gecategoriseerd
Model: DPT-R

Heb je hulp nodig?

Als je hulp nodig hebt met Scanstrut DPT-R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Scanstrut

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd